
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Rev-A-Shelf closet basket gives you open wire storage with slide-out access for closet organization. This chrome closet basket is a steel closet basket sized at 24 inches wide, 14 inches deep, and 11 inches high. Rev-A-Shelf lists this product as a side mount closet basket with heavy duty ball bearing slides and a bayonet mounting system configured to the 32 mm system. The pull-out closet basket design helps you reach folded clothes, accessories, and other stored items without digging into a fixed shelf. The basket is also described as a removable closet basket, so it can be lifted out and reinstalled when needed. For buyers planning a closet storage basket upgrade, this model focuses on access, fit, and repeatable installation.
Key specs to confirm: This Rev-A-Shelf steel closet basket is listed at 24 inches wide, 14 inches deep, and 11 inches high with a chrome finish. It is a side mount closet basket that uses heavy duty ball bearing slides and a bayonet mounting system configured to the 32 mm system. Before ordering, confirm your opening width, interior depth, side panel condition, and drilling pattern. Also confirm that your project is intended for a basket that rests on top of the slides and can be removed and reinstalled. A 100 lb slide rating is stated in the product data for the basket slides. Any additional load limits, installation tolerances, or compliance details should be confirmed with the manufacturer or technical documentation.
What's included: Verified product data identifies an individual pack Rev-A-Shelf chrome steel closet basket with side-mount slide hardware. If you need a detailed hardware count or fastener list, confirm included items before purchase.
What to verify before ordering: Check your usable opening size, side-mount clearance, 14 inch depth fit, 11 inch basket height clearance, and whether your closet system follows a 32 mm pattern. Confirm the finish, slide placement, and whether you need a removable basket for your layout.
A pull-out closet basket is often chosen when fixed shelving makes daily access harder than it should be. In a reach-in closet, folded jeans, sweaters, or accessories can disappear at the back of a shelf. A side mount closet basket changes that storage pattern by bringing the contents forward on slides. This Rev-A-Shelf closet basket uses heavy duty ball bearing slides, so the basket is built for repeated pull-out use in a closet system.
The 24 x 14 x 11 closet basket size is useful when you need a wider wire basket and already know your opening can accept a 24 inch basket width. The 14 inch depth matters in shallow or moderate-depth closet sections where a deeper basket may interfere with the back panel or stored items. The 11 inch height gives buyers a clear number to compare against shelf spacing, hanging garments, and adjacent components.
Another practical point is removability. Rev-A-Shelf states that the basket is designed to be easily removable and effortlessly reinstalled. That matters for buyers who want to carry contents to a folding area, clean the closet interior, or reconfigure storage without removing the entire slide set. The product data also states that the basket rests on top of the ball bearing slides. Rev-A-Shelf says this helps eliminate torque twist that is inherent in other designs. For installers, that detail can matter when a basket is loaded unevenly or used frequently by the end customer.
This closet storage basket also fits projects built around the 32 mm system. The bayonet mounting system is configured to that pattern, which can simplify planning when your closet panels already follow standard line-bore spacing. If your closet does not use that pattern, confirm mounting compatibility before ordering. Buyers replacing an older removable closet basket should also verify side spacing, slide position, and actual interior dimensions rather than relying on the old part alone.
When buyers compare pull-out closet basket options, the useful differences are usually finish, basket size, slide style, mounting method, and whether the basket can be removed after installation. This Rev-A-Shelf steel closet basket is clearly defined in those areas. It is chrome, side mounted, sized at 24 inches by 14 inches by 11 inches, and built with heavy duty ball bearing slides.
That level of detail helps reduce ordering mistakes. Some baskets are selected mainly by appearance, but fit and mounting are what determine whether the basket installs cleanly and works every day. A side mount closet basket requires buyers to confirm side panel support and available width. A basket tied to a 32 mm bayonet mounting system should also be reviewed against the panel drilling pattern in the closet or cabinet structure.
The removable basket design is another point buyers often look for. A removable closet basket can be easier to clean around and easier to reorganize than a permanently fixed wire bin. The basket-on-top-of-slides layout is also worth noting because Rev-A-Shelf specifically identifies it as a way to avoid torque twist associated with other designs. That gives the buyer a concrete construction detail to compare when choosing among similar closet storage basket styles.
For a trade buyer or serious DIY installer, the practical value here is not hype. It is the combination of known dimensions, known finish, known mounting style, and a known slide format from Rev-A-Shelf. If your project needs other details such as exact fastener count, panel thickness requirements, or full installation instructions, those should be confirmed before the order is placed.
This Rev-A-Shelf closet basket fits only where the opening, side clearance, and mounting layout match a 24 inch wide, 14 inch deep side-mount basket setup.
This closet basket is a side mount closet basket with slides mounted at the sides rather than underneath.
This chrome closet basket is listed at 24 inches wide, 14 inches deep, and 11 inches high.
This pull-out closet basket uses heavy duty ball bearing slides for slide-out access.
This removable closet basket is designed by Rev-A-Shelf to be easily removed and reinstalled.
This closet basket uses a bayonet mounting system configured to the 32 mm system, so buyers should confirm panel drilling compatibility.
This steel closet basket has a chrome finish.
This Rev-A-Shelf product lists heavy duty basket slides rated at 100 lb. Confirm application details in manufacturer documentation before installation.
This 24 x 14 x 11 closet basket should be matched to your opening width, interior depth, side-mount spacing, and 32 mm mounting pattern.
This closet basket is a non-electrical storage product. Follow manufacturer installation guidance and local building requirements where applicable.
Rev-A-Shelf closet basket is a practical choice when you need a chrome, side-mount wire basket with verified dimensions and slide hardware. Before purchase, confirm the 24 inch width, 14 inch depth, 11 inch height, side-mount fit, and 32 mm bayonet mounting compatibility with your closet layout. Verified product data supports the basket, slides, removable design, and individual-pack format. If you need exact hardware counts or project-specific installation details, confirm those points before ordering so the basket matches your opening and use case.
Sold In: 1 Each