Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf closet basket gives you open wire storage with slide-out access for closet organization projects that need a defined width, depth, and height. This steel closet basket is a side mount closet basket from Rev-A-Shelf Corporation with a satin nickel finish and a 24 inch width, 20 inch depth, and 18 inch height. The pull out closet basket design uses heavy duty ball bearing slides with a bayonet mounting system configured to the 32 mm system. The basket is also designed to be easily removable and effortlessly reinstalled. For buyers comparing a closet basket 24 x 20 x 18 for built-in storage, this closet storage basket offers a clear fit profile and service-friendly access without relying on fixed shelf storage.
Key specs to confirm: This Rev-A-Shelf steel closet basket is listed at 24 inches wide, 20 inches deep, and 18 inches high, with side mount installation. Buyers should confirm the inside opening, side panel condition, and mounting layout before ordering, especially when fitting a closet basket 24 x 20 x 18 into existing cabinetry or wardrobe systems. The slides are described as heavy duty 100 lb rated ball bearing slides with a bayonet mounting system configured to the 32 mm system. If your project depends on exact clearances, hole spacing, or installation hardware details, confirm those points with the manufacturer or technical documentation. Any compliance, safety, or other unlisted technical requirements should also be confirmed there.
What's included: Verified product data confirms one Rev-A-Shelf side mount satin nickel closet basket sold as an individual pack. The product description also confirms ball bearing slides are part of the basket system. If you need a full hardware count or fastener list, confirm included items before purchase.
What to verify before ordering: Check your available width, usable depth, full basket height, side-mount support surfaces, and whether your installation follows a 32 mm system. Confirm that the satin nickel finish matches nearby hardware and that the slide arrangement suits your closet storage basket layout.
A pull out closet basket is often chosen when shelves leave clothing stacked too deep or when smaller items get lost at the back of a compartment. In reach-in closets, wardrobe towers, and built-in storage sections, buyers usually want open visibility plus quick access. This Rev-A-Shelf closet basket addresses that need with a wire basket format that slides out instead of forcing the user to reach into a fixed cavity.
The listed dimensions matter here. A closet basket 24 x 20 x 18 is suited to projects where the opening is planned around a wider basket and deeper storage area. The 20 inch depth can help use front-to-back space more effectively than shallow organizers, while the 18 inch height gives a taller basket profile for bulkier folded goods or grouped accessories. Because this is a side mount closet basket, the side panels and opening dimensions should be checked carefully before ordering.
For installers and serious DIY buyers, slide type also affects long-term use. Rev-A-Shelf specifies heavy duty 100 lb rated ball bearing slides with a bayonet mounting system configured to the 32 mm system. That gives buyers a clear reference point when matching the basket to closet systems built around that drilling pattern. The product description also states that the basket is designed to be easily removable and effortlessly reinstalled. That can help when cleaning the unit, changing seasonal storage, or accessing the surrounding interior during adjustments.
Another practical point is how the basket sits on the slides. Rev-A-Shelf states that the basket rests on top of ball bearing slides, and that this feature eliminates the torque twist inherent in other designs. For a buyer trying to keep a pull out closet basket moving in a stable way, that design note is useful. If your project has unusual side-wall construction, limited clearance, or a custom closet frame, confirm fit details and installation guidance before purchase.
When buyers compare a steel closet basket to other storage formats, the main questions are usually access, visibility, and mounting style. A fixed shelf can hold folded items, but it does not pull forward. A solid drawer can hide contents, but it does not offer the same open wire visibility. This Rev-A-Shelf closet storage basket is designed for users who want to see contents quickly and pull them out into reach.
Compared with basket systems that are harder to remove, this removable closet basket is described as easy to take out and reinstall. That matters in projects where users reorganize often or need occasional cleaning access. Compared with designs that place more stress on the basket during movement, Rev-A-Shelf specifically notes that this basket rests on top of the ball bearing slides to eliminate torque twist inherent in other designs. That is a useful distinction for buyers who care about stable slide action over time.
Finish and system compatibility also shape the choice. This satin nickel closet basket may be a better visual match when the surrounding closet hardware uses similar metallic tones. The bayonet mounting system configured to the 32 mm system gives another concrete buying point for installers already working within that layout. Rather than choosing by appearance alone, buyers should compare basket width, depth, height, side-mount requirements, slide type, removability, and confirmed included parts. Those verified details are what determine whether a side mount closet basket will fit the project and perform as expected.
Rev-A-Shelf closet basket is listed at 24 inches wide, 20 inches deep, and 18 inches high.
This Rev-A-Shelf closet basket is a side mount closet basket, so buyers should confirm suitable side panels and opening space.
The product description confirms heavy duty ball bearing slides as part of the basket system.
Rev-A-Shelf lists heavy duty ball bearing slides rated for 100 lb.
The basket is designed to be easily removable and effortlessly reinstalled.
The mounting system is configured to the 32 mm system, but buyers should confirm exact hole layout and fit for their project.
This Rev-A-Shelf steel closet basket has a satin nickel finish.
This side mount closet basket requires confirmation of inside width, usable depth, full height, and side mounting surfaces. Follow manufacturer installation guidance and local building requirements where applicable.
Included hardware details are not fully listed in the verified data, so buyers should confirm the exact contents before ordering.
Rev-A-Shelf closet basket is a practical choice when you need a defined 24 inch by 20 inch by 18 inch pull-out wire basket with side mount installation and satin nickel finish. Verified details include the steel basket, heavy duty 100 lb rated ball bearing slides, 32 mm system mounting configuration, and removable basket design. Before purchase, confirm opening size, side-mount compatibility, and the exact included hardware so the basket fits your closet layout without delays.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  RSCHBI-242018 Mfr# CHBI-242018-3 | Rev-A-Shelf 24" Hamper Liner, Black, CHBI-242018-3 |
