Rev-A-Shelf Steel 24"W x 20"D x 7"H Side Mount Chrome Closet Basket, CB-242007CR-3

Choose a Rev-A-Shelf closet basket

Rev-A-Shelf closet basket gives you a pull-out storage option for closet systems that need open visibility and easy access. This chrome closet basket is a steel side mount basket sized at 24 in. wide x 20 in. deep x 7 in. high. Rev-A-Shelf makes this closet basket with heavy duty ball bearing closet basket slides rated for 100 lb and configured to the 32 mm system with a bayonet mounting system. The basket rests on top of the slides, which helps eliminate the torque twist found in some other designs. For buyers comparing a 24 inch closet basket or a 20 inch deep closet basket, this model is built for removable use, so the basket can be taken out and reinstalled when needed.

See how this steel closet basket helps

• Steel closet basket construction - Steel gives the Rev-A-Shelf closet basket a rigid frame for organized clothing and accessory storage.
• Chrome finish - The chrome closet basket finish suits buyers who want a bright, clean look in closet systems.
• 24 in. width - This 24 inch closet basket fits projects planned around a wider basket opening for folded items or accessories.
• 20 in. depth - The 20 inch deep closet basket supports deeper closet layouts where front-to-back storage space matters.
• 7 in. basket height - The basket height helps contain stored items while keeping contents visible and easy to reach.
• Side mount design - A side mount closet basket works with closet layouts designed for slide-supported pull-out storage.
• Heavy duty ball bearing slides rated for 100 lb - Rev-A-Shelf closet basket slides are built for substantial storage loads in everyday use.
• Bayonet mounting system configured to 32 mm system - This mounting format helps installers working with closet systems built around the 32 mm standard.
• Removable basket design - The removable closet basket can be lifted out and reinstalled for cleaning, reconfiguration, or access.
• Basket rests on top of slides - This ball bearing closet basket design helps eliminate torque twist that can occur with other basket styles.

Confirm side mount closet basket fit

Key specs to confirm: This Rev-A-Shelf steel closet basket is listed at 24 in. wide x 20 in. deep x 7 in. high and uses a side mount format. Confirm your opening width, interior depth, side panel construction, and mounting layout before ordering. This basket uses heavy duty ball bearing slides rated for 100 lb and a bayonet mounting system configured to the 32 mm system. Buyers should also confirm whether their closet system is drilled or planned for that mounting pattern. If any additional load, safety, or compliance details are required for your project, those should be confirmed with the manufacturer or technical documentation.

What's included: Verified product data confirms one individual pack of the Rev-A-Shelf chrome steel closet basket with slide system details listed in the product description. If you need exact hardware contents, fastener types, or templates, confirm included items before purchase.

What to verify before ordering: Check your clear opening, usable depth, side mount compatibility, and whether your installation follows a 32 mm system layout. Confirm the basket height works for the items you plan to store and verify any hardware details needed for your closet material and jobsite conditions.

Use a pull out closet basket well

Use this pull out closet basket daily

A pull out closet basket is often chosen when shelves make it hard to see or reach stored items. In reach-in closets, wardrobe towers, and organized storage sections, buyers often want open wire storage that slides forward instead of fixed shelving that hides items at the back. This Rev-A-Shelf closet basket addresses that need with a 24 in. wide by 20 in. deep basket that pulls out on heavy duty ball bearing slides.

For clothing storage, a steel closet basket works well when you want airflow and visibility for folded garments, accessories, or smaller soft goods. The 7 in. basket height helps keep contents contained without fully boxing them in. If your project needs a removable closet basket, this model is designed to be easily removed and reinstalled. That can help when cleaning, changing seasonal storage, or adjusting a closet layout over time.

Installers may also prefer this side mount closet basket when working in systems built around the 32 mm standard. The bayonet mounting system configured to 32 mm can support a more consistent installation process in compatible layouts. Because the basket rests on top of the slides, the design helps eliminate torque twist that is inherent in some other basket designs. For a buyer, that means the basket design itself addresses a common concern with sliding wire storage.

Before ordering, confirm the cabinet or closet section has enough interior width and depth for a 24 inch closet basket and 20 inch deep closet basket. Also verify side mounting conditions and any required drilling or hardware details if your system is not already prepared. If your project has special load expectations beyond the listed 100 lb slide rating, confirm full application details with the manufacturer documentation.

Compare side mount closet basket designs

When buyers compare closet basket options, the main differences usually come down to finish, mounting style, slide type, basket removability, and size. This chrome closet basket is clearly defined in those areas. It is a steel basket with a chrome finish, side mount installation, heavy duty ball bearing slides, and a removable basket design.

That matters because generic wire baskets may not always state how the basket interfaces with the slides or whether the basket can be removed without major disassembly. Rev-A-Shelf states that this basket is designed to be easily removable and effortlessly reinstalled. That is a practical detail for long-term closet use and maintenance.

Another point buyers often compare is slide support. This product uses heavy duty ball bearing closet basket slides rated for 100 lb. Buyers looking at a pull out closet basket for daily access often prefer clearly stated slide construction and load information rather than vague references to smooth movement. This product description also explains that the basket rests on top of the slides, a design intended to eliminate torque twist found in other designs. That gives installers and buyers a concrete construction detail to evaluate.

For fit planning, this Rev-A-Shelf closet basket also benefits from clearly stated dimensions: 24 in. wide, 20 in. deep, and 7 in. high. If you are comparing baskets for a closet tower or shelf opening, those dimensions are central to avoiding ordering mistakes. The right choice depends on your available opening, side panel structure, and whether your project follows the 32 mm system. Follow manufacturer installation guidance and local building requirements where applicable.

Ask fit questions about closet basket install

Order the right chrome closet basket

Chrome closet basket buyers usually need clear fit data more than extra claims. This Rev-A-Shelf model gives you a steel side mount basket sized at 24 in. x 20 in. x 7 in., with heavy duty ball bearing slides rated for 100 lb and a removable basket design. Before purchase, confirm your opening size, side mounting layout, and 32 mm system compatibility. Also verify the exact included hardware if your project needs that detail before installation.