Pro Value Series 14" Full Extension Standard Ball Bearing Drawer Slides PRO 100, Unhanded Side Mount Black - 4600-14-BK

Pro Value Series 14 Inch Drawer Slides Use

Pro Value Series 14 inch drawer slides are full extension standard ball bearing drawer slides designed as side mount components for drawers that need smooth travel and defined support. The 14 inch length sets up a drawer run sized for cabinets designed around that depth, so the slide stroke matches the box. A 100 lb load rating defines the working capacity for drawers built within that limit, giving installers a clear guideline for typical residential or light commercial storage. The side mount design places each slide along the drawer sides, matching common cabinet construction in the woodworking trade. An unhanded configuration allows the same slide to be used on either side, which reduces part sorting on the bench. The black finish establishes a dark, uniform look when the slide is visible in open cabinet layouts.

Key Drawer Slide Details For Daily Work

• The 1/2 inch side clearance specification sets the required gap between drawer side and cabinet side, so installers can size drawer boxes to fit existing casework accurately.
• A height of 1-13/16 inch defines the vertical space the slide occupies, which helps when planning stack layouts where multiple drawers share a single opening.
• The full extension design lets the drawer travel approximately its 14 inch length, so the drawer box moves fully forward for easier access to stored items at the back.
• The 32 mm pattern on the slide provides hole locations that align with system-32 style cabinet drilling, which speeds layout for shops that build on that standard.
• A face frame mounting hole offers a direct mounting point to face frame styles, giving installers a defined reference when working on framed cabinet construction.
• The lever disconnect feature allows the drawer member to separate from the cabinet member, which simplifies installing the drawer to the slide and later removal during adjustments.

Mounting And Fit Details For These Slides

These Pro Value Series side mount ball bearing slides are specified as side mount components, so they attach to the drawer side and cabinet wall in a parallel run. The 1/2 inch side clearance establishes how much material to subtract from the cabinet opening to size the drawer width, which is central to achieving a smooth fit without binding. A slide height of 1-13/16 inch shows how much space the hardware occupies beneath or above adjacent drawers, guiding vertical spacing when stacking multiple boxes. The 32 mm pattern on the slide lines up with system-32 drilling in many cabinet cases, which supports consistent hole placement across a production run. The lever disconnect design lets installers engage or release the drawer member from the cabinet member during fitting, which streamlines alignment checks and hardware access.

Where These 14 Inch Slides Work Best

Applications Suited To 14 Inch Full Extension Slides

The 14 inch length of these Pro Value Series drawer slides matches drawer boxes built for similar nominal depth, which is common in many cabinet and furniture layouts. A 100 lb rating supports drawers that carry typical household or shop items within that limit, aligning with storage where medium loads are expected rather than very heavy contents. The side mount configuration fits cabinet designs that rely on traditional side-mounted hardware rather than under-mount systems, matching a wide range of casework built in the woodworking trade. The black finish helps these slides blend into darker interiors, which can be useful on cabinets where hardware is visible when drawers are open. The open access design of the slide provides exposure to the ball bearing raceways, which aids in visual inspection and contact surfaces during installation or service work.

Design Details That Support Consistent Installation

The 1/2 inch side clearance spec on these slides gives a precise target for drawer box width relative to the cabinet opening, which reduces trial-and-error fitting and helps drawers run smoothly. A height of 1-13/16 inch defines the slide profile, which helps installers plan vertical clearances between stacked drawers and avoid interference. The 32 mm pattern aligns with system-32 drilling practices, allowing shops that use line-boring equipment to position screw holes using existing setups. The face frame mounting hole supports direct fastening to frame members on framed cabinets, helping locate the slide front in a consistent, repeatable position. Lever disconnect allows the drawer member to detach from the cabinet member, which simplifies mounting the drawer to the slide, fine-tuning reveals, and removing drawers when cabinets are serviced. The open access design exposes key areas of the slide, which can make fastening points and moving components easier to reach during fitting.

Common Questions About These Pro Value Slides

Selecting These Slides For Your Next Project

The Pro Value Series 14 inch full extension standard ball bearing drawer slides bring side mount construction, a 100 lb rating, and a 1/2 inch side clearance to drawer projects built around that format. The 32 mm pattern, face frame mounting hole, lever disconnect, and open access design support efficient installation in both frameless and framed cabinet work. For jobs calling for a 14 inch black finish slide with these dimensions and features, this model provides the defined specs needed to plan cabinet openings, drawer sizes, and mounting layouts with confidence.