Pro Value Series 18" Full Extension Standard Ball Bearing Drawer Slides PRO 100, Unhanded Side Mount Black - 4600-18-BK

18 Inch Ball Bearing Drawer Slide For Cabinets

18 inch ball bearing drawer slide defines this Pro Value Series PRO 100 side mount slide as a standard-duty option rated at 100 lb, so it suits drawers that need full extension with dependable movement under everyday cabinet loads. The unhanded design lets the same 18 inch slide mount on either side of the drawer, which keeps layout and inventory straightforward on multi-drawer runs. A black finish gives the slide a low-visibility look inside darker casework, which helps the hardware recede when the drawer is open. This PRO 100 slide is a full extension model, so the drawer clears the cabinet and exposes the full interior, useful where access to the back of the drawer matters. The slide is a side mount type from the Side Mount Drawer Slides class, so it works in cabinets laid out for sidemounted hardware rather than undermount tracks.

Key Drawer Slide Details That Help Your Build

• The side clearance of 1/2 inch defines the gap between drawer side and cabinet wall, guiding drawer box sizing so drawers run smoothly without binding or excess play.
• The slide height of 1-13/16 inches sets the vertical space the hardware occupies, which matters when stacking drawers or working around shallow openings and existing clearances.
• The 18 inch length ties directly to the nominal drawer depth, allowing accurate planning of cabinet depth and drawer box length for full extension travel.
• A 32 mm pattern is provided, aligning with the 32 mm cabinet system so hole drilling can follow a consistent grid for faster, repeatable casework production.
• A face frame mounting hole is built into the slide, allowing the slide to fasten at the frame and support layouts that use face frame construction rather than frameless boxes.
• A lever disconnect feature lets the drawer member release from the cabinet member, which simplifies installing the loaded drawer and later removal for service or adjustment.

Installation Details For Side Mount Drawer Use

This Pro Value Series side mount drawer slide uses a 1/2 inch side clearance, so the cabinet and drawer widths must be laid out around that fixed gap on each side for accurate fit and travel. The slide height of 1-13/16 inches means the hardware sits low enough for most standard drawer side heights while still giving room above for drawer material and bottom. A 32 mm pattern is present along the slide, letting installers align fasteners with system holes quickly when working in 32 mm casework. The face frame mounting hole helps tie the slide to the frame in face frame cabinets, stabilizing the front of the slide. Recommended fasteners are #8 x 7/16 inch Phillips pan head, which match the slide holes and provide a predictable bite into cabinet material.

How This Pro Value Series Slide Works In Practice

Where This 18 Inch Slide Fits Best

This Pro Value Series 18 inch full extension standard ball bearing drawer slide is part of the Side Mount Drawer Slides class, so it is suited to cabinets designed for sidemounted hardware runs in kitchens, shops, or storage pieces using that layout. The drawer slide carries a 100 lb rating, which positions it for drawers that hold typical residential or light commercial loads rather than extremely heavy contents. The 18 inch length corresponds to medium-depth drawers, common in base cabinets where full access is needed without oversizing the case. Side clearance of 1/2 inch pairs with typical cabinet construction methods, so builders can use familiar drawer width formulas when sizing boxes. The 32 mm pattern means this slide integrates smoothly into system-built cabinets that already follow that hole spacing.

Why The Design Supports Smooth, Repeatable Results

The ball bearing construction in this PRO 100 slide provides guided movement along the full extension travel, which supports controlled opening and closing when the drawer is loaded near the 100 lb rating. The unhanded configuration means the same part number serves left and right sides, reducing part variation on the job and simplifying replacements. A lever disconnect lets the installer separate the drawer member from the cabinet member, which helps mount drawers at a bench and then reconnect them in the case without wrestling a full assembly. The face frame mounting hole at the front of the slide supplies a direct fixing point into the frame, helping align the slide front where it most affects reveal and drawer action. The black finish offers a darker appearance that blends with dark interiors or hardware themes, keeping the slide visually subdued when drawers are open.

Common Questions About This 18 Inch Slide

Select This Slide For 18 Inch Side Mount Projects

The Pro Value Series 18 inch full extension standard ball bearing drawer slide PRO 100 in black brings a 100 lb rating, 1/2 inch side clearance, and a 32 mm pattern together for straightforward cabinet work. The unhanded side mount design and lever disconnect support efficient installation and later service on drawers built around an 18 inch depth. For projects needing a black finish slide that fits system-drilled or face frame cabinets, this side mount ball bearing slide delivers a practical match for that layout.