Pro Value Series 22" Full Extension Standard Ball Bearing Drawer Slides PRO 100, Unhanded Side Mount Black - 4600-22-BK

22 Inch Ball Bearing Drawer Slides For Smooth Travel

22 inch ball bearing drawer slides from the Pro Value Series use a standard ball bearing design to support drawers that need consistent, repeatable movement on side mount hardware. The slides are full extension, so the 22 inch length allows the drawer to open its full travel for direct access to stored items throughout the box. The slides are unhanded side mount, meaning the same slide design works on either side of the drawer, which simplifies layout and stocking for repetitive cabinet runs. A black finish identifies the slide visually in darker interiors and aligns with projects where visible hardware needs a dark tone. As part of the Pro Value Series side mount drawer slides, this slide fits into typical cabinet hardware workflows where installers rely on predictable dimensions and mounting patterns.

Key Drawer Slide Details That Support Your Build

• The side clearance of 1/2 inch sets the gap between the drawer side and cabinet, which guides drawer box sizing so the slide tracks properly without binding during installation or operation.
• The slide height of 1-13/16 inch defines how much vertical space the hardware occupies, which helps when stacking drawers or fitting slides between fixed shelves and stretchers in a cabinet.
• The 22 inch length combined with full extension movement determines the drawer depth and access, allowing the box to extend fully so items at the back are reachable without overextending the cabinet front.
• The 100lb rating stated in the description identifies the slide class for projects where drawers must support substantial contents while running on ball bearings in typical cabinetry applications.
• The 32 mm pattern designation signals that the mounting holes follow a 32 mm system layout, which aligns with many line-bored cabinet sides for faster, repeatable slide positioning.
• The face frame mounting hole feature provides a mounting point suited to face frame cabinet construction, which aids in tying the slide to the frame without improvising attachment locations.

Side Mount Drawer Slide Fit And Mounting Details

This Pro Value Series slide is a side mount drawer slide, so it attaches to the cabinet side while supporting the drawer from each side of the box. The unhanded design allows the same slide type to be positioned on both left and right, reducing part differentiation during installation and replacement work. With a side clearance of 1/2 inch, the cabinet and drawer widths can be planned around that fixed allowance so the ball bearing members track consistently. The stated slide height of 1-13/16 inch gives a clear reference when aligning the slide vertically on narrow drawer sides. The recommended fasteners are #8 x 7/16 inch Phillips pan head, which points directly to a screw size and head style that seats correctly in the slide mounting holes.

How This Pro Value Series Slide Works In Projects

Where These 22 Inch Slides Are Typically Used

This Pro Value Series 22 inch full extension standard ball bearing drawer slide is part of a side mount drawer slides product class, so it fits projects built around side-mounted hardware rather than bottom-mount configurations. The slide suits cabinet boxes that can provide 1/2 inch of side clearance, allowing the ball bearing members to run correctly alongside a drawer constructed to match that spacing. Its 22 inch length matches drawers designed for that depth, which is common in many base cabinets and storage units where full extension access is important. The black finish helps it visually match darker cabinet interiors or hardware schemes when the slides may be visible on pullout units. Because the slide is unhanded, shops that build repeated cabinet runs can keep a single 22 inch model on hand for both sides of the drawer, supporting streamlined inventory for this length.

Details That Support Repeatable Drawer Results

The full extension design of this 22 inch ball bearing slide allows the drawer to travel its entire nominal length, which supports consistent access dimensions from job to job when using the same slide length. The specified 1-13/16 inch height helps installers and fabricators align the slide on narrow drawer sides while maintaining clearance from the drawer bottom and top rails. The side clearance of 1/2 inch ties directly into drawer box width calculations, which is important when building multiple drawers that must all run smoothly on the same cabinet line-bore layout. The slide features a lever disconnect, allowing the drawer member to be separated from the cabinet member using the lever, which simplifies drawer removal during finishing, transport, or adjustment. An open access design is called out, describing how the slide configuration allows easier reach to mounting areas during installation. The presence of a face frame mounting hole supports attachment in face frame cabinetry, which is common in many shops using that construction style.

Common Questions About 22 Inch Ball Bearing Slides

Select This 22 Inch Slide For Side Mount Builds

The Pro Value Series 22 inch full extension standard ball bearing drawer slide brings together a 1/2 inch side clearance, 1-13/16 inch height, and a 32 mm mounting pattern in a black side mount format. The unhanded design works on either side of the drawer, while the lever disconnect and open access design support straightforward installation and later adjustment. With a 100lb rating and face frame mounting hole detail, this drawer slide fits many cabinet and storage projects built around side-mounted, full extension hardware.