Plastic Nail On Glides Economy 3/4" Base Diameter, Brown - 5000 Box Quantity

Plastic Nail On Glides For Everyday Furniture Use

Plastic nail on glides from the Pro Value Series give work surfaces and tables a defined bearing point by using a plastic head with an integrated nail, so the contact area stays consistent on floors and hard surfaces. This Pro Value Series furniture glide is part of the value line of plastic flat head nail-on glides, which keeps the design simple for straightforward production or field installation. The glide sits in the Work Surface & Tables and T-Nuts and Glides category, so it suits furniture feet and similar support points where a fixed glide is preferred over an adjustable foot. The brown color helps the glide blend with darker bases, so the foot detail does not visually stand out on many wood tones. The product functions as a furniture glide, so installers can standardize on it wherever a smooth, stable plastic bearing surface is needed.

Key Pro Value Series Glide Details For Pros

• The Pro Value Series value line of plastic flat head nail-on glides offers a simple, repeatable glide solution, so shops can use the same basic part across multiple furniture or table projects without changing specifications.
• Glides have 3/16" thick plastic heads, so there is a substantial plastic layer between the nail and the floor contact point, providing a consistent bearing thickness during normal furniture use.
• The nails are 11/16" long, giving a clear penetration length into wooden feet or bases, so installers can set the glide securely into the substrate for stable support.
• Glide heads are available in four head diameters - 1/2", 5/8", 3/4" and 7/8" - so the same style can be scaled to different leg sizes or load points, helping maintain proportion between foot size and contact area.
• This specific glide uses a 3/4" base diameter, so the contact circle is moderate in size for many table and furniture applications where a balanced footprint is desired.
• The brown color option lets the glide coordinate with darker finishes, so the installed feet present a more unified appearance on finished furniture pieces.

Flat Head Nail On Glide Fit And Setup

This Pro Value Series plastic nail-on glide uses a flat head design, so the underside of the head presents a broad, level surface where it meets the floor. With a 3/4" base diameter, each glide creates a circular footprint that distributes furniture weight across a defined area, which helps keep work surfaces and tables sitting firmly on hard flooring. The 3/16" thick plastic head sets a fixed vertical dimension from the bottom of the furniture leg to the floor, contributing to consistent height when matching multiple pieces. An 11/16" long nail projects above the head, providing a set length that can be driven into wood legs or frames, so installation becomes a simple tap-in operation wherever a secure, non-adjustable glide is appropriate.

Using Plastic Nail On Furniture Glides In Projects

Where These Brown Flat Head Glides Work Best

This plastic furniture glide is classified under Work Surface & Tables and T-Nuts and Glides, so it fits naturally into table bases, desks, and similar installations where fixed glides are preferred over casters. The brown color version serves darker-toned furniture, helping the 3/4" base diameter head visually recede against matching finishes on legs and stretchers. Because the Pro Value Series identifies this as part of a value line of plastic flat head nail-on glides, it suits volume applications such as production runs, multi-room fit-outs, or standardized shop builds where a consistent, economical glide is required. The 3/4" base diameter size balances footprint and discreteness, so it can be used on mid-size legs that need a defined bearing point without appearing oversized.

Details That Support Repeatable Glide Installation

The 3/16" thick plastic head gives each glide a known thickness, which helps installers achieve similar overall heights across multiple legs on a single piece or matching group of furniture. The 11/16" long nail is integrated into the glide, so the installer works with a single component that both attaches and bears the load, aiding a straightforward workflow in the shop or on site. Glide heads being available in four diameters - 1/2", 5/8", 3/4" and 7/8" - allows a shop to standardize on the same style and brand while selecting head size by leg dimension or load expectation, helping reduce variation in part types. The G3392B manufacturer part number and the Pro Value Series branding clearly identify this specific brown 3/4" base diameter version, so reordering the same glide for repeat jobs or later expansions remains direct and consistent.

Common Questions About G3392B Plastic Nail Glides

Select Brown 3/4 Inch Glides For Your Next Run

The Pro Value Series plastic nail on glides with a 3/4" base diameter and brown finish provide a defined plastic bearing surface through a 3/16" thick head and an 11/16" long nail, so furniture feet gain a stable footprint tied to a single, repeatable part number. For shops and installers working on work surfaces, tables, or similar projects, choosing the G3392B furniture glide standardizes the glide detail around a known size, color, and construction that fits into ongoing workflows.