Plastic Nail On Glides Economy 7/8" Base Diameter, Gray - 2000 Box Quantity

Plastic Nail On Glides 7/8 Inch For Furniture Bases

Plastic nail on glides 7/8 inch give furniture feet a smooth plastic bearing surface, so pieces move more easily across workroom or shop floors. This Pro Value Series value line design uses flat plastic heads, so the contact surface stays broad and stable under typical furniture loads. As a furniture glide from the Work Surface & Tables category, it suits chair, table, or fixture bases that benefit from reduced friction at the floor. The gray color matches many neutral base finishes, which helps keep a clean, consistent look in visible installations. Each glide uses a nail to attach to the furniture base, so the part ties the plastic head directly to the wood or other substrate. That fixed connection keeps the 7/8 inch base diameter centered under the leg, which supports repeatable placement from piece to piece.

Key Glide Details That Support Furniture Use

• The 7/8 inch base diameter gives each furniture glide a relatively broad footprint, so the load spreads across more floor area, helping reduce point pressure on many hard surfaces during normal movement.
• The gray color option lets these glides blend with common gray-toned bases and hardware, so visible chair or table feet keep a consistent, low-contrast appearance in finished rooms.
• The economy plastic construction in the Pro Value Series value line supports large-run projects, so shops can outfit many furniture pieces while keeping part selection consistent across jobs.
• The flat head design creates a level bearing surface at the floor, so when the glide is driven squarely, the furniture leg has a stable, predictable contact point during use.
• The nail-on style permanently fastens the glide head to the leg material, so once driven to depth, it resists shifting at the base during normal repositioning of furniture.

Nail On Glide Attachment And Fit Details

Each Pro Value Series plastic flat head nail-on glide uses an 11/16 inch long nail, so the fastener penetrates into the furniture base deeply enough for a firm bite in typical leg materials. The 3/16 inch thick plastic head raises the leg slightly above the floor, so the furniture foot rests on the glide rather than on raw substrate. With the 7/8 inch base diameter, the glide seats well under many medium-size legs, which helps keep the bearing area close to the leg perimeter. As a furniture glide in the T-Nuts and Glides group, it fits into common shop workflows where legs are prepped, then glides are driven in as a finishing hardware step.

How These 7/8 Inch Glides Work In Shops

Where Plastic Nail On Furniture Glides Are Used

This furniture glide, identified by manufacturer part number 33-75, fits into projects that need a 7/8 inch base diameter at the floor. In that role, it suits work surfaces, tables, and furniture pieces where legs benefit from a defined plastic contact pad. The head thickness of 3/16 inch establishes a modest lift under each leg, which helps separate finished furniture bases from direct floor contact. That spacing can be useful on shop-built tables or fixtures that regularly slide for repositioning. Within the Work Surface & Tables and T-Nuts and Glides categories, these glides support repeatable setups, so a run of chairs or tables can all share the same base footprint and height reference at the floor.

Why Glide Dimensions Matter For Repeatable Results

The combination of a 7/8 inch base diameter and 3/16 inch thick plastic head defines a consistent bearing circle and height, so each leg fitted with this glide stands at the same relative elevation. That dimensional consistency is important when several legs support a flat work surface, because it helps the structure rest evenly when the glides are driven to uniform depth. The 11/16 inch long nail extends well beyond the plastic head, so once driven into the leg, it provides an anchored core that keeps the head aligned under load. As part of the Pro Value Series value line, this plastic flat head nail-on style also keeps the fastening approach the same across large orders, which simplifies production routines when many identical furniture pieces are assembled.

Common Questions About 7/8 Inch Gray Glides

Select 33-75 Glides For Consistent Furniture Bases

The Pro Value Series plastic flat head nail-on glides in this 7/8 inch gray version give furniture legs a defined plastic bearing surface with a 3/16 inch head and 11/16 inch nail. For runs of work surfaces, tables, or general furniture in the shop, this 33-75 furniture glide keeps the base footprint, color, and elevation consistent across pieces. For projects matching this 7/8 inch base diameter and gray finish, this economy furniture glide aligns with repeatable installation routines and supports uniform results across the job.