Plastic Nail On Glides Economy 3/4" Base Diameter, Gray - 200 Box Quantity

Plastic Nail On Glides For Everyday Furniture Use

Plastic nail on glides from the Pro Value Series provide an economy option for supporting furniture and work surfaces while using a simple nail-on installation, which helps installers handle repeat jobs efficiently across multiple pieces. This plastic flat head nail-on glide uses a 3/4 inch base diameter, so the contact area spreads load across a moderate footprint on the floor or surface. The gray plastic head gives a neutral, low-visibility color that blends with many bases and shop fixtures. A 3/16 inch thick plastic head adds height under the leg or support, which helps create consistent clearance across matching pieces in a project. The glide is built with an 11/16 inch long nail, so the shank penetrates deeply into wood substrates during installation and helps the glide stay fixed under normal furniture movement. As a furniture glide in the Pro Value Series value line, this part works well where cost-sensitive projects still call for repeatable component dimensions.

Key Nail-On Glide Details That Support Work

• The Pro Value Series value line of plastic flat head nail-on glides provides a cost-conscious choice, so high-quantity furniture or work surface builds can use consistent parts without inflating material budgets.
• Gray color on the glide head offers a neutral appearance, which suits a wide range of furniture bases and shop fixtures where hardware should remain unobtrusive in finished installations.
• The 3/4 inch base diameter defines the footprint of this specific glide, which helps installers match existing 3/4 inch bases or standardize contact areas across multiple legs on the same project.
• Glides in this series use 3/16 inch thick plastic heads, so each leg gains a predictable lift that supports level setups when the same part number is used across all legs or supports.
• An 11/16 inch long nail is integrated into the glide, so the point penetrates deeply into wood members during driving and helps the glide stay anchored under routine sliding and repositioning.
• The Pro Value Series offers glide heads in four head diameters - 1/2 inch, 5/8 inch, 3/4 inch, and 7/8 inch - which allows builders to select head sizes that match load distribution and design requirements across different projects.

Nail-On Glide Fit And Installation Considerations

This plastic nail-on glide is part of the furniture glides category, so it is intended to be driven directly into the base material of furniture or work surfaces. The 3/4 inch base diameter defines how much area rests on the floor, which affects how weight is carried and how easily pieces move across smooth surfaces. A 3/16 inch thick plastic head adds a measurable stand-off, giving each supported leg a defined lift that can simplify leveling when every leg uses the same glide. The 11/16 inch long nail is sized to engage wood substrates effectively, so installers can drive the glide straight into chair legs, table legs, or similar members in a single step. As a plastic flat head nail-on glide within the Pro Value Series value line, it fits projects where straightforward nailing and predictable dimensions take priority.

Using These Pro Value Series Glides In Projects

Where This 3/4 Inch Glide Works Best

This Pro Value Series plastic nail-on glide sits in the Work Surface & Tables and T-Nuts and Glides category, so it is suited to furniture and work surface pieces that rely on small hardware at the base. The 3/4 inch base diameter sets it up for legs and supports that benefit from a medium-size contact patch, often found on chairs, light tables, or utility fixtures where a balance between footprint and maneuverability matters. The gray color of the glide head keeps hardware visually quiet under many finishes, which is practical for shop furniture, office fixtures, or utility cabinets. As a value line plastic flat head nail-on glide, it fits scenarios where volumes are higher and cost per piece influences the overall project plan while still relying on defined dimensions for setup.

Details That Support Consistent Results And Replacement

The 3/16 inch thick plastic head on this glide provides a defined height under each leg, which helps installers achieve consistent elevation across multiple points when identical glides are used. Over a row of work tables or a set of matching chairs, this consistent thickness supports uniform stance and reduces time spent compensating for hardware variation. The 11/16 inch long nail is matched to the glide, so depth of penetration remains the same every time the PL33-74 part number is used, helping repeat installations feel familiar and predictable. Identifying this glide by its 3/4 inch base diameter and PL33-74 manufacturer part number gives shops a precise reference when reordering or matching existing furniture hardware. Being part of the Pro Value Series value line ties this component into a broader group of plastic nail-on glides with multiple head diameters, which supports building standard hardware lists across different furniture sizes while keeping part numbers organized for future replacements.

Common Questions About PL33-74 Nail-On Glides

Choose This Glide When You Need Defined Dimensions

The Pro Value Series plastic flat head nail-on glide with 3/4 inch base diameter, 3/16 inch thick plastic head, and 11/16 inch long nail provides a clearly defined hardware choice for furniture and work surface bases. The gray head color and value line positioning suit utility fixtures, shop pieces, and cost-sensitive furniture runs where consistent part sizing matters. For projects that call for a PL33-74 tack glide or a matching specification within a standard glide program, this furniture glide gives a repeatable option grounded in specific, documented dimensions.