Plastic Nail On Glides Economy 7/8" Base Diameter, Brown - 2000 Box Quantity

Plastic Nail On Glides For Furniture Bases

Plastic nail on glides from the Pro Value Series give work surfaces and tables a defined bearing point, so furniture contacts the floor on a consistent plastic head rather than raw wood. This specific brown glide uses a 7/8 inch base diameter, creating a broad footprint that spreads weight and helps the furniture sit more evenly on the floor. Each glide has a plastic flat head design, so the bearing surface stays flat against the floor for predictable sliding behavior. The glide head is 3/16 inch thick plastic, which creates a low-profile interface between the furniture leg and floor while still adding a protective layer under the piece. An 11/16 inch long nail anchors the glide into the furniture base, providing penetration depth for a secure hold in typical wood furniture legs. The product belongs to the Furniture Glides class under work surface and table hardware, so it fits directly into common shop workflows for outfitting new builds or refurbishing existing pieces.

Key Brown 7/8 Inch Glide Details In Use

• The 7/8 inch base diameter sets a defined contact area, so furniture weight is carried over a larger plastic surface that helps reduce concentrated pressure on finished floors during movement.
• The 3/16 inch thick plastic head adds a controlled layer under the furniture leg, which helps separate wood from flooring and maintains a predictable working height at each bearing point.
• The 11/16 inch long nail gives each glide a fixed anchoring depth into the furniture base, supporting a solid attachment that resists loosening under normal repositioning of tables or work surfaces.
• The flat head style of these plastic nail on glides presents a smooth, broad face to the floor, which helps furniture slide in a more controlled way when it is repositioned in the shop or in the field.
• The brown color option allows these economy plastic glides to blend with darker furniture bases, so the hardware remains less visually prominent when installed on exposed legs or frames.

Installation Details For Plastic Nail On Glides

Pro Value Series plastic flat head nail on glides install by driving the 11/16 inch long nail into the furniture base, so the glide becomes a fixed part of the leg or frame. The 7/8 inch base diameter gives a clear visual target during layout, helping installers align multiple glides at consistent positions on each corner or support point. With a 3/16 inch thick plastic head, the change in overall height at each foot is controlled, which helps maintain level results when the same glide is used at all bearing points. The Furniture Glides classification within work surface and table hardware means these parts are sized and shaped for typical table legs and similar supports, so they fit directly into standard shop drilling and layout patterns.

Using G3393B Glides On Work Surfaces

Where These Plastic Nail On Glides Fit Best

The G3393B plastic nail on glides are identified as a Pro Value Series value line product, aligning them with everyday work surface and table projects where cost-sensitive furniture glides are appropriate. With a 7/8 inch base diameter, these glides are sized for legs and bases that benefit from a relatively broad plastic contact area, such as tables, benches, or work surfaces that may be moved across hard flooring. The 3/16 inch thick plastic head places a modest layer between the furniture and floor, so the piece gains a protective buffer without significantly changing its overall stance. Their brown color aligns with darker furniture finishes, allowing installers to match the glide appearance more closely to the base, which matters when legs are visible in finished installations.

Why The 7/8 Inch Head And Nail Length Matter

The 7/8 inch base diameter of these plastic flat head nail on glides provides more surface area than smaller diameters from the same family, which matters when supporting heavier work surfaces because the contact area helps distribute load across the floor. By using a 3/16 inch thick plastic head, the glide adds a stable cushion that can help reduce direct wood-to-floor contact while preserving a consistent height at every foot when multiples are installed. The 11/16 inch long nail used in each glide supplies depth into the furniture leg or rail, giving the hardware bite in the substrate, which supports long-term holding strength during repeated sliding or repositioning. As part of a line that offers multiple head diameters, this 7/8 inch size lets buyers choose a larger bearing surface when their project needs more footprint under each leg while staying within the same Pro Value Series family.

Common Questions About G3393B Brown Glides

Selecting G3393B Glides For Your Project

The G3393B plastic nail on glides from the Pro Value Series pair a 7/8 inch base diameter with a 3/16 inch thick plastic head and an 11/16 inch long nail, so the same part sets contact area, height change, and anchoring depth. Their brown color and furniture glide classification position them for work surfaces and tables where a broad plastic footprint and driven nail attachment fit the job. For projects that match these dimensions and material details, adding this Pro Value Series glide keeps the choice consistent with the verified specifications.