Amerock Highland Ridge Appliance Pull For Large Fronts

Amerock Highland Ridge appliance pull gives an 8 inch center-to-center grip that spans wide cabinet or appliance fronts, so doors and panels can be pulled open with a confident, full-hand hold. The polished nickel finish provides a bright, reflective surface that suits high-end kitchens and utility spaces where a clean, metallic look needs to tie into hinges, faucets, and appliance trim. Its zinc die-cast construction creates a solid-feeling pull body that supports repeated daily use on heavier fronts. The pull length of 10-7/16 inches extends beyond the 8 inch mounting centers, which frames the panel visually and offers extra fingertip clearance around the ends. A projection of 1-5/8 inches stands the grip away from the surface, giving space for knuckles and work gloves when operating tall or integrated fronts.

Key Highland Ridge Pull Details For Daily Use

• The 8 inch center-to-center dimension sets consistent mounting hole spacing, which helps line this pull up with standard appliance and cabinet drilling patterns for a uniform run across doors and drawer fronts.
• The 10-7/16 inch overall length stretches past the mounting points, creating a pronounced bar that reads correctly on wider doors and panels where small pulls can look undersized or feel awkward to grab.
• The 1-5/8 inch projection pushes the handle out from the face, improving hand clearance so fingers do not drag across finished fronts during use and helping reduce wear at high-touch edges.
• The 7/8 inch width gives the pull a substantial gripping surface that feels stable in the hand, which is useful on heavier appliance-style doors where leverage and comfort affect everyday operation.
• The polished nickel finish delivers a smooth, reflective appearance that pairs with other polished nickel decorative hardware, helping maintain a coordinated look across hinges, knobs, and pulls in the same room.
• The zinc die-cast material forms a rigid pull body, supporting a solid feel when opening and closing doors and helping the handle stay true to its mounted alignment over time.

Mounting And Fit Details For The 8 Inch Pull

The 8 inch center-to-center dimension on this Amerock Highland Ridge appliance pull defines the exact distance between the two mounting points, which guides drilling when laying out new panels or reusing existing holes. The #10-24 specified screw size matches the threaded sockets in the pull, so the connection between the fasteners and the pull body remains secure along the full thread engagement. Multiple #10-24 screw lengths from 0.75 inch to 1.75 inch provide options to match varying door or panel thicknesses, helping the pull fasten tightly without bottoming out or leaving loose threads. The 3/4 inch outer diameter washers distribute the load from the screw heads against the rear face, supporting the mount when the pull is used to move heavier appliance or tall pantry doors.

Using The Amerock Highland Ridge Pull In Projects

Where This 8 Inch Appliance Pull Fits Best

This Highland Ridge zinc die-cast pull is suited to appliance fronts and larger cabinet doors where an 8 inch center-to-center spread is desired for both scale and leverage. The polished nickel finish pairs visually with polished nickel faucets, lighting, and hinges, so long runs of cabinetry can share the same metallic tone. On tall pantry doors, the 10-7/16 inch overall length looks proportionate to the door height, helping the handle become a visible vertical element rather than disappearing against the surface. The 7/8 inch width and 1-5/8 inch projection give enough grip depth to feel comfortable on doors that are opened multiple times a day, from refrigerators with custom panels to utility cabinets in workrooms.

Details That Support Consistent Mounting Results

The Amerock Highland Ridge appliance pull uses the 8 inch center-to-center measurement as a controlled layout point, which simplifies repeating hole locations across a bank of cabinets or appliance fronts. Because the pull body is zinc die-cast, each unit follows the same casting dimensions, helping rows of handles line up visually when measured off the same center-to-center spacing. The defined #10-24 screw thread specification means installers can rely on that thread form to engage cleanly with the pull, which is useful when working from the back side of thick doors where alignment is done by feel. Offering multiple #10-24 screw lengths as part of the specification gives flexibility to address different panel build-ups, so the thread engagement into the pull remains consistent even when substrate thickness changes from one door to another. The 3/4 inch outer diameter washers spread clamping pressure on the rear face, supporting a firm mount that resists pull-through when users apply force to open heavier appliance and tall cabinet doors.

Common Questions About The Highland Ridge Appliance Pull

Select This Pull For 8 Inch Center Projects

This Amerock Highland Ridge appliance pull, part number BP55322PN, provides an 8 inch center-to-center layout, a 10-7/16 inch overall bar length, and a 1-5/8 inch projection, all in polished nickel over zinc die-cast construction, making it a practical choice when a substantial, polished nickel handle is required on wide cabinet doors or appliance-style panels.