Berenson Art Nouveau 5-1/16" (128 mm) Center to Center Vintage Nickel Pull, 4015-1VTN-P

Berenson Art Nouveau Pull 128mm For Cabinets

Berenson Art Nouveau pull 128mm gives cabinets a defined 5-1/16 inch center to center grip, which sets hole spacing precisely for new work or straightforward handle replacement on doors and drawers. The pull is part of the Art Nouveau collection, so its design ties visually with other pieces in the same series for consistent styling across a run of cabinetry. Constructed from zinc die cast material, the handle offers a solid feel in the hand that supports everyday opening and closing in residential or shop environments. The vintage nickel finish on the pull provides a muted metallic look that coordinates with many hinge and appliance finishes in the same tone range. Overall length of 7-15/16 inches gives a generous handhold, while the 1 inch width and 13/16 inch base help spread the load on the cabinet face for a stable mounted feel.

Key Art Nouveau Pull Details For Daily Use

• The 5-1/16 inch (128 mm) center to center dimension sets clear drilling locations, which speeds layout when installing multiple Berenson pulls in a row on cabinet fronts.
• The zinc die cast construction creates a single, rigid pull body, which supports frequent door and drawer operation without flexing under typical hand force.
• The vintage nickel finish gives the pull a subdued metallic surface, which works well where a softer look than bright chrome is desired across the cabinet line.
• The 7-15/16 inch overall length provides extra gripping area, which helps users get a comfortable hand position on wider drawers and taller doors.
• The 1-3/4 inch projection stands the pull off the face of the cabinet, which allows fingers to wrap behind the handle for a secure, natural grip.
• The 1 inch width and 13/16 inch base size distribute contact on the cabinet face, which supports a firm feel at each mounting point.

Installation Geometry And Fit For This Pull

This Berenson Art Nouveau series pull uses a 5-1/16 inch center to center dimension, which aligns directly with common 128 mm cabinet drilling patterns for straightforward installation on many layouts built around that spacing. The pull has a 7-15/16 inch total length, so installers can quickly see its edge clearance needs relative to adjacent doors, countertops, or trim. With a projection of 1-3/4 inches off the cabinet face, the handle provides working finger clearance while keeping the profile reasonably tight to the door or drawer front. The 1 inch width and 13/16 inch base allow the pull to sit flat against the surface, creating a stable interface that supports consistent alignment when tightening fasteners through the standard 8-32 x 1 inch screw size noted for this model.

Using This Vintage Nickel Pull In Real Projects

Where The Art Nouveau Cabinet Pull Works Best

The Art Nouveau collection identity places this Berenson pull in decorative cabinet work where coordinated hardware matters, such as kitchens, baths, and built-ins that share a common hardware line. The 5-1/16 inch center to center drilling suits cabinets planned around the widely used 128 mm hole spacing, so it works well on new installations designed with metric or inch-based layouts that match this standard. Its 7-15/16 inch overall length makes it a strong option on wider drawers and taller doors where a longer pull looks proportional to the front. The vintage nickel finish lets this pull sit comfortably alongside hinges and other fittings in similar nickel tones, giving projects a unified hardware appearance without bright reflection.

Details That Support Repeatable Cabinet Results

The defined 5-1/16 inch center to center and 128 mm metric callout help installers set up jigs or templates once, then repeat the same drilling pattern across every cabinet for consistent hardware alignment. Zinc die cast construction provides a uniform pull body from piece to piece, which keeps handle feel and visual appearance consistent on long cabinet runs. Projection of 1-3/4 inches off the face establishes reliable hand clearance, so every door and drawer fitted with this pull offers similar grip access. The 1 inch width and 13/16 inch base concentrate the contact area, aiding precise positioning over the pre-drilled holes before tightening the standard 8-32 x 1 inch screws that are sized for this specific pull. Together, these fixed dimensions give installers predictable results from cabinet to cabinet.

Common Questions About This Berenson Art Nouveau Pull

Select This Pull For 128mm Cabinet Layouts

The Berenson Art Nouveau Series 5-1/16 inch (128 mm) center to center vintage nickel pull gives installers a defined drilling pattern and coordinated finish for cabinets planned around the 128 mm standard. With zinc die cast construction, a 7-15/16 inch overall length, and 1-3/4 inch projection, this pull supports comfortable use across doors and drawers that share the same handle style. For projects needing a consistent Art Nouveau collection look in vintage nickel, this 4015-1VTN-P pull provides the fixed dimensions and finish needed to carry the hardware theme across the full run of cabinetry.