Berenson Alto Series Verona Bronze 1-3/4" (44 mm) Diameter Knob, - 4104-40VB-P
Description
Berenson Alto Knob For Cabinet Projects
Berenson Alto knob is an aluminum cabinet knob designed for projects where a 1-3/4 inch diameter pull point is needed on doors or drawers. The knob comes from the Alto Collection, so its design and dimensions stay consistent across that series, which helps when matching hardware across multiple cabinets in the same space. The Verona Bronze finish is applied to aluminum, providing a specific bronze color tone that can coordinate with other Verona Bronze items on the job. The 1-3/8 inch projection sets how far the knob stands off the cabinet face, creating a defined hand clearance for gripping in tight kitchen, bath, or casework layouts. A width of 1-3/4 inch and a base dimension of 1-1/16 inch concentrate the pull force into a stable footprint on the door or drawer front.
Key Alto Series Verona Bronze Knob Details
- The Alto Collection identity ties this knob to other Alto Series pieces, which supports visual continuity when the same style is used across a room of cabinets and built-ins.
- The aluminum material keeps the knob itself aluminum-based, which affects weight and handling during layout, drilling, and attachment on cabinet doors and drawer fronts.
- The Verona Bronze finish defines the visible color tone of the knob, which matters when matching finishes with Verona Bronze hinges, pulls, or nearby metal elements.
- The 1-3/4 inch diameter and matching 1-3/4 inch width create a full round contact area, which affects how the hand engages the knob on both larger and smaller fronts.
- The 1-1/16 inch base dimension defines the footprint against the cabinet surface, which influences how the knob visually scales on narrow rails and wider drawer faces.
Alto Verona Bronze Knob Fit And Mounting
The Alto Series Verona Bronze 1-3/4 inch diameter knob is specified with a 1-3/8 inch projection, so installers know exactly how far it will stand off the face once mounted. That projection figure helps during layout on doors and drawers near adjacent walls or tall panels, because it defines the clearance zone around the hardware. The base dimension of 1-1/16 inch identifies how much surface area contacts the cabinet front, which plays into where the center point is located when marking drill points. With the knob diameter and base size defined, installers can reliably repeat hole locations across a bank of drawers to keep sightlines and reveals consistent.
Using This Berenson Alto Series Aluminum Knob
Where This Verona Bronze Knob Fits Best
This Berenson Alto Series Verona Bronze 1-3/4 inch diameter knob is part of the Alto Collection, so it fits projects where that specific Alto style is already planned for pulls and knobs. The knob is categorized as decorative hardware for cabinets and moldings, which aligns it with use on cabinet doors, drawer fronts, and similar casework components. Its round 1-3/4 inch diameter face provides a centered pull point suited to both single small doors and wider drawers that use two knobs for balanced operation. The 1-1/16 inch base dimension keeps the contact area compact enough for narrow stiles while still large enough to visually register on broader drawer fronts in kitchen, bath, or office cabinetry.
Details That Support Consistent Cabinet Results
The defined 1-3/4 inch diameter and width allow layout work to be calculated from a clear centerline, which simplifies drilling jigs and templates when repeating hole locations. A 1-3/8 inch projection sets a predictable distance from the cabinet face, so door and drawer hardware will line up in a uniform row when multiple Alto knobs are installed at the same height. The aluminum material keeps each knob aligned with that material choice, which matters when coordinating with other aluminum-based decorative hardware. The Verona Bronze finish ties this knob to other Verona Bronze pieces, supporting consistent color tone from one cabinet run to the next. With the 1-1/16 inch base dimension documented, installers can visually balance the footprint against rail widths and panel detailing during knob placement.
Common Questions About Alto Verona Bronze Knob
What is the diameter of this Berenson Alto knob?
The Berenson Alto knob has a 1-3/4 inch diameter, giving a full round grip point that suits both cabinet doors and drawer fronts in typical residential or commercial casework.
How far does the Verona Bronze knob project from the cabinet?
The Alto Series Verona Bronze knob has a 1-3/8 inch projection, which defines the stand-off distance from the cabinet face and helps when planning clearances near adjacent surfaces.
What material is the Berenson 4104-40VB-P knob made from?
The Berenson 4104-40VB-P knob is made from aluminum, which affects its weight and feel and aligns it with other aluminum decorative hardware choices on the project.
What finish does this Alto Series cabinet knob have?
This Alto Series cabinet knob has a Verona Bronze finish, providing a specific bronze tone that coordinates with other Verona Bronze hardware and nearby metal elements.
What are the base dimensions of this cabinet knob?
The knob has a base dimension of 1-1/16 inch, which defines the footprint on the cabinet surface and helps when sizing the knob visually on narrow or wide fronts.
What is the manufacturer part number for this Alto knob?
The manufacturer part number is 4104-40VB-P, which identifies this specific Alto Series Verona Bronze 1-3/4 inch diameter aluminum knob from Berenson Corporation.
Selecting This Alto Knob For Cabinet Work
The Berenson Alto Series Verona Bronze 1-3/4 inch diameter aluminum knob provides defined dimensions, a documented 1-3/8 inch projection, and a 1-1/16 inch base footprint. Those specifics support consistent layout and a coordinated Verona Bronze look across your cabinet runs.
