Berenson Alto Series 3-3/4" (96 mm) Center to Center Matte Black Pull, - 7925-2055-P

Berenson Alto Series Matte Black Pull For Cabinets

Berenson Alto Series matte black pull is a steel cabinet handle with a 96 mm center to center dimension, so installers get a straightforward fit for layouts drilled on this common size. The 4-1/2 inch overall length gives the pull enough hand contact for everyday cabinet use while keeping proportions tight on standard doors and drawers. Its 1-1/16 inch projection sets the grip away from the face, providing finger clearance that helps prevent knuckle contact with the cabinet surface. The 1/4 inch width creates a slim profile that suits simple contemporary fronts while still giving a defined edge to grab. The matte black finish tones down reflection, which helps this pull sit quietly on both light and dark facings. As part of the PRO Basics collection, the pull offers a consistent style reference when matching other pieces from the same material and finish.

Key Pull Details That Support Cabinet Work

• The PRO Basics collection designation gives installers a defined family look, helping coordinate this pull with other Berenson pieces that share the same material and finish for unified runs of cabinetry.
• The steel construction provides a solid-feeling handle body, supporting repeated opening and closing on active cabinets where a firm pull point is needed every day.
• The 96 mm center to center measurement sets the screw hole spread, so it aligns directly with drilling patterns laid out to this metric standard across many cabinet runs.
• The 4-1/2 inch length offers enough bar to grasp without crowding smaller doors, which helps on compact kitchen, bath, or shop fronts where spacing between pulls is limited.
• The 1-1/16 inch projection holds the grip off the face, creating finger room behind the pull so users can hook and pull doors without scraping across the door surface.
• The 1/4 inch width establishes a narrow front edge, which keeps the visual line light while still giving fingertips a defined edge to catch when pulling.
• The matte black finish keeps reflections low, which helps the pull read as a clean, flat accent line across cabinet faces in both residential and shop environments.
• The screw size of 8-32 x 1 inch matches a common cabinet fastener standard, supporting straightforward installation into typical drawer fronts and door rails.

Mounting Details For The 96 mm Cabinet Pull

This Berenson Alto Series cabinet pull uses a 96 mm center to center mounting spread, so screw holes land at that exact distance when drilling new fronts or rehabbing existing cabinets drilled to this pattern. The steel body works with the 8-32 x 1 inch screw size noted for this pull, giving a known thread and length pairing that suits many typical cabinet door and drawer front thicknesses. With a 4-1/2 inch overall length, the pull covers the span between the mounting holes plus overhang at each end, which helps mask minor edge wear around existing drill points. The 1-1/16 inch projection fixes how far the grip stands off the face, giving installers a predictable clearance line when aligning this pull across varied cabinet depths.

Using This Matte Black Pull In Cabinet Projects

Where The Berenson 7925-2055-P Pull Fits Best

The Berenson 7925-2055-P pull, part of the PRO Basics collection, is suited to cabinet layouts that call for a 96 mm center to center handle. That metric spacing appears in many frameless and framed cabinet patterns, so this pull can sit on new fronts drilled to that spread or replace hardware that already uses the same 96 mm distance. The 4-1/2 inch length lets it work on both doors and drawers without overpowering tighter drawer banks. Its 1-1/16 inch projection and 1/4 inch width pair to create a compact handle that still offers enough surface for a full finger pull, useful on kitchen, bath, or shop cabinets where frequent access happens along entire runs.

Why These Pull Dimensions Support Consistent Results

The 96 mm center to center dimension on this steel matte black cabinet pull defines an exact drilling template, which helps installers keep handle alignment consistent from cabinet to cabinet along a wall or island. The 4-1/2 inch total length frames that mounting spread with a balanced amount of pull bar at each end, providing a uniform visual rhythm when multiple pulls line up across doors and drawer fronts. A 1-1/16 inch projection controls how far the handle stands proud of the surface, which influences how cabinet doors clear adjacent obstacles and how easily hands can grip from different approach angles. The slim 1/4 inch width tightens the look while still giving a distinct pull edge, which helps doors open with a direct, centered pull rather than fingertip slipping across a wide, flat face. The matte black finish ties these dimensions together by presenting a clean, low-glare line that traces consistently across each cabinet front.

Common Questions About This Berenson Cabinet Pull

Selecting This 96 mm Pull For Your Cabinets

The Berenson Alto Series cabinet pull from Wurth Baer Supply combines a 96 mm center to center mounting, 4-1/2 inch length, and 1-1/16 inch projection in a steel body with a matte black finish, giving cabinet projects a defined, repeatable handle standard. For cabinet runs laid out on the 96 mm spread that call for a slim 1/4 inch profile and low-glare black appearance, this PRO Basics pull aligns the drilling pattern, grip feel, and visual line into one consistent hardware choice.