Berenson Alto Series 11-5/16" (287 mm) Center to Center Verona Bronze Pull, - 7902-2VB-P

Berenson Alto Pull 288mm Center To Center Use

Berenson Alto pull 288mm center to center describes a cabinet and drawer pull from the Alto Series that is built around an 11-5/16 inch center to center mounting dimension, which sets consistent spacing for drilling and layout on doors or drawer fronts. The pull is part of the Berenson Alto Series, which identifies it for matching with other Alto pieces across a project. The finish is Verona Bronze, which sets a dark, warm tone that helps coordinate with similar bronze hinges, knobs, and room hardware. The pull is made from zinc die cast material, which creates a solid metal part shaped to tight tolerances so the handle seats flat against the cabinet surface. The overall length is 13-1/4 inch, which provides extended hand grasp area across wider drawer fronts. A projection of 1-1/4 inch sets the stand-off from the cabinet face, leaving finger clearance behind the pull in everyday use.

Practical Details Of This Verona Bronze Pull

• The Alto Series identity ties this pull to a defined Berenson collection, which helps maintain a consistent style when multiple cabinet pulls are used in the same room layout.
• The Verona Bronze finish defines the surface color and tone of the pull, which supports coordinated hardware choices on cabinets, vanities, or furniture pieces using similar bronze finishes.
• The zinc die cast material provides a cast metal body, which gives the pull a precise form so the bases align cleanly with pre-bored mounting holes on cabinet fronts.
• The 11-5/16 inch center to center measurement fixes the hole spacing, which is useful when planning drilling jigs or matching replacements on existing cabinets already bored to this dimension.
• The 13-1/4 inch length and 3/8 inch width define the handle footprint, which helps with visual proportioning on wide drawers and narrower doors during layout and design.
• The 1-1/4 inch projection and 3/8 inch base diameter set how far the pull stands off the surface and how much space each foot occupies, which matters when working near panel edges or profiles.

Installation Dimensions For Alto Verona Bronze Pull

The Alto Series 11-5/16 inch center to center cabinet pull uses an 11-5/16 inch mounting span, which lets installers mark two fixed points for drilling through the cabinet face or drawer front with repeatable accuracy. The pull length of 13-1/4 inch means the handle extends slightly beyond the hole centers on both sides, which affects how it lines up with panel rails or drawer borders. A projection of 1-1/4 inch defines the distance from the cabinet surface to the front of the grip, allowing planning around adjacent doors or drawer fronts so handles do not interfere when opening. The 3/8 inch width and 3/8 inch base diameter describe the contact area on the surface, which helps during layout when working near narrow stiles or detailed edge profiles that limit available mounting space.

Using The Alto Series Verona Bronze Cabinet Pull

Where This Alto Series Cabinet Pull Fits Best

The Berenson Alto Series 11-5/16 inch center to center Verona Bronze pull is categorized under decorative hardware and moldings in handles and pulls, which places it in cabinet, furniture, or similar millwork applications where a mounted handle is needed. The 11-5/16 inch center to center mounting size suits larger cabinet doors or wide drawers, because the extended span spreads the gripping points across more of the front. The 13-1/4 inch overall length helps the pull visually match broader faces found on kitchen bases, pantry units, or built-in storage where smaller pulls would look undersized. Its Verona Bronze finish supports use on projects that follow a bronze hardware theme, so doors, drawers, and adjacent room fixtures can share a similar appearance. As part of the Berenson Alto Series, this pull can be used wherever that specific series is already specified, helping maintain continuity across new installations or expansions.

Details That Support Straightforward Cabinet Pull Replacement

The 11-5/16 inch center to center measurement on this Alto Series pull is a key dimension when replacing existing hardware, because it matches pulls that already use the same mounting span without altering the underlying bore pattern. The listed screw size of 8-32 defines the threaded interface, so existing 8-32 tapped inserts or through-bored holes sized for 8-32 machine screws stay compatible with this handle. The 1-1/4 inch projection keeps the grip at a known stand-off from the cabinet surface, helping maintain similar ergonomics to other pulls with matching projection on the same run of cabinetry. The 3/8 inch base diameter and 3/8 inch width help predict how the new pull will cover marks or impressions from prior hardware, which is useful when swapping onto finished cabinet faces. The manufacturer part number 7902-2VB-P clearly identifies this exact Verona Bronze Alto pull, supporting consistent reordering when multiples are required across a job.

Common Questions About Alto Verona Bronze Pulls

Selecting This Alto Pull For Your Next Project

The Berenson Alto pull 288mm center to center combines an 11-5/16 inch mounting span, Verona Bronze finish, and zinc die cast construction, giving installers a clearly defined option for larger cabinet doors and drawers. With its 13-1/4 inch length, 1-1/4 inch projection, and 3/8 inch base diameter, the pull offers predictable dimensions for layout on new work or replacements. For projects calling out the Berenson Alto Series in Verona Bronze, this 7902-2VB-P pull aligns with those specifications and can be chosen to maintain consistent style and mounting details across the job.