Berenson Alto Series 5-1/16" (128 mm) Center to Center Verona Bronze Pull, - 7903-2VB-P

Berenson Alto Series Cabinet Pull For Cabinets

Berenson Alto Series cabinet pull from the Reprise Collection is a zinc die cast handle in a Verona Bronze finish, so it delivers a defined modern profile with a warm metallic tone that coordinates with other bronze elements on a project. The pull has a 5-1/16 inch (128 mm) center to center dimension, which sets consistent screw spacing across doors and drawers for straightforward layout on face frames and panels. Overall length is 6 inches, giving enough hand contact area to open heavier fronts comfortably in daily use. The pull projects 1-3/16 inches from the mounting surface, which creates finger clearance for a solid grip when installed on cabinet doors or drawer fronts. Width and base diameter are both 3/8 inch, giving a slim look at the stem and grip that suits contemporary and transitional cabinet designs while keeping lines visually light on the run.

Key Verona Bronze Pull Details For Projects

• The 5-1/16 inch (128 mm) center to center measurement sets a standard drilling pattern, which supports efficient boring on runs of doors and drawers using jigs or CNC programs.
• The 6 inch overall length extends slightly beyond the hole spacing, which provides finger room at each end and helps visually span wider drawer fronts or taller doors without feeling oversized.
• The 1-3/16 inch projection from the mounting surface creates working clearance for fingers, which is useful on thicker door edges or drawer fronts where shallow pulls can feel cramped.
• The 3/8 inch base diameter gives a compact footprint at each mounting point, which helps when aligning the pull near panel edges or narrow rails where space around the fastener locations is limited.
• The 3/8 inch grip width keeps the profile slim, which supports clean sightlines on contemporary cabinet faces and allows multiple pulls on wide drawers without the hardware looking bulky.
• The Verona Bronze finish provides a bronze-toned surface, which lets the pull coordinate visually with other Verona Bronze decorative hardware on the same installation.

Installation Geometry And Mounting Dimensions

The 5-1/16 inch (128 mm) center to center dimension defines the drilling distance between the mounting holes, which allows installers to use standard 128 mm cabinet boring patterns across multiple fronts. With a 6 inch total length, the pull extends 7/16 inch beyond the screw centers at each end, which gives a predictable reveal to reference when positioning relative to door edges or drawer top rails. The 1-3/16 inch projection sets how far the grip stands off the surface, which is helpful when aligning with neighboring drawers so hardware does not interfere as fronts move past each other. A 3/8 inch base diameter and 3/8 inch width keep the mounting area compact, which can be valuable when working near beveled profiles or narrow stile sections where larger bases would crowd the detail.

Using This Verona Bronze Pull In Cabinet Runs

Where This 128 Mm Cabinet Pull Fits Best

This pull is part of the Reprise Collection, which gives it a coordinated design language that matches other Reprise handles on the same project for visual continuity across a room. The 5-1/16 inch (128 mm) center to center spacing suits cabinet doors and drawer fronts sized for mid-length pulls, so it works on typical kitchen, bath, and storage cabinetry that uses 128 mm boring patterns. Its 6 inch overall length helps this pull sit proportionally on medium and wider drawers, because the grip line runs far enough across the panel to feel balanced without overlapping into panel details. The Verona Bronze finish ties into bronze-toned hinges or other decorative hardware, which allows installers to maintain a consistent metal color from cabinets to other fixtures. A slim 3/8 inch width helps this pull visually complement both flat slab and framed doors, since the narrow bar does not dominate detailed profiles.

Why These Measurements Support Repeatable Results

The defined 5-1/16 inch (128 mm) center to center specification lets shops standardize drilling templates and CNC programs, which reduces layout variation when producing multiple cabinet runs that all use this pull. The 1-3/16 inch projection provides a fixed stand-off distance, which makes it easier to predict hand clearance on overlay fronts and to align pulls so they remain comfortable to grasp on tall pantry doors as well as short drawers. With 6 inches of overall length and 3/8 inch base diameter, installers can reference the ends and bases against edges or rails, which simplifies aligning hardware consistently from cabinet to cabinet. Zinc die cast construction establishes the pull as a metal component, which supports a solid-feeling grip when users open and close doors and drawers repeatedly in everyday cabinet service. The consistent 3/8 inch width across the bar also helps when creating visual grids, because repeated pulls line up with matching sightlines.

Common Questions About This Berenson Alto Pull

Select This Pull For 128 Mm Cabinet Runs

The Berenson Alto Series 5-1/16 inch (128 mm) center to center Verona Bronze pull combines a zinc die cast build, 6 inch overall length, and 1-3/16 inch projection to support consistent cabinet layouts. The 3/8 inch base diameter and 3/8 inch width keep the profile slim for contemporary and transitional designs while the Verona Bronze finish coordinates visually with matching hardware. For projects built around 128 mm boring patterns, this Reprise Collection pull offers defined dimensions that translate cleanly into shop drilling and on-site alignment.