Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Pro Value PRO 5000 Series 14 inch over-travel ball bearing drawer slide is a side-mount steel slide rated 150 lb per pair, with an integrated hold-in anti-rebound detent and 1 inch of travel beyond full extension. It is the choice when a standard 100 lb cabinet slide is undersized and when the drawer needs to clear a countertop overhang or deep face frame on the way out.
A 14 inch slide at the 150 lb class serves drawers that a standard kitchen slide cannot handle. Think of a compact lateral file drawer, a dense archive pull-out in a credenza, or a shop drawer stocked with heavy hand tools. In each case the load pushes past 100 lb and the depth of the cabinet is modest enough that a 14 inch length matches the drawer box. The 1 inch of over-travel earns its keep wherever the drawer sits beneath a countertop lip or behind a thick face frame: the drawer member pushes past the cabinet face so the full rear of the box is visible and reachable rather than buried under the overhang.
The slide is cold-formed steel with a bright zinc electroplate finish. Zinc is the working standard for side-mount ball bearing slides — it protects the steel members through years of indoor service without the cost of specialty coatings. This is a functional finish on hardware that sits beside the drawer box and is largely out of sight when the drawer is closed. It is suited to dry, indoor installations; it is not rated for wet, washdown, or exterior environments.
With 1/2 inch of required side clearance per side, the drawer box must be built 1 inch narrower than the cabinet opening. Because the slide is non-handed, one part number covers both sides of the drawer — order a quantity of two per drawer. In face-frame cabinet installations, the rear of the slide needs support; add the appropriate series rear mounting brackets, sold separately, to bridge the setback from the frame to the cabinet side. For frameless cabinets on a 32mm system, the slide mounts directly to the panel.
Per pair. Two slides installed one on each side of the drawer carry 150 lb total. Do not double the number by counting each slide separately.
The slide is 14 inches long (closed length) and travels that full length plus 1 additional inch of over-travel. The 14 inch figure is the closed slide dimension, not the total travel distance.
The hold-in anti-rebound detent is a mechanical catch that keeps the drawer in the closed position and prevents it from bouncing back after a firm push. It is not a soft-close feature — there is no damper and no spring assist. The drawer does not pull itself shut; it stays where it is left once closed.
No. This slide is non-handed — both pieces in a pair are identical and fit either side of the drawer. Order two of this SKU for one complete drawer installation.
Yes, but face-frame construction requires rear support for the back end of the slide. Add the matching series rear mounting brackets (sold separately) to complete the installation. Without them, the slide's rear end is unsupported.
When the load is beyond what standard cabinet slides are built for and the drawer needs to fully clear an overhang, the PRO 5000 Series 14 inch over-travel slide covers both requirements without moving up to a specialized heavy-duty product.
Sold In: 10 Pair
