Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Pro Value PRO 5000 Series is a 26 inch side-mount ball bearing drawer slide rated 150 lb per pair, with over-travel action that carries the drawer one inch past full extension and a hold-in detent that keeps it shut between uses. The zinc finish blends cleanly into standard cabinet interiors and stands up to years of daily cycling on a demanding drawer.
A 26 inch slide at the 150 lb class covers ground a standard kitchen slide cannot reach. Loaded lateral file drawers, deep shop storage drawers, and heavy-duty utility pulls all land in this range. The one inch of over-travel is the detail that makes the slide practical under a countertop overhang or behind a thick face frame: instead of stopping flush with the cabinet front, the drawer pushes an inch past full extension, putting the rear contents within reach without straining over the counter edge. The hold-in detent is the right partner for this application — a drawer carrying that kind of weight should stay put when pushed closed, not drift or rebound.
The PRO 5000 is built from cold-formed steel with a bright zinc electroplate finish. Zinc is the working standard for side-mount ball bearing slides in cabinetry and shop environments: it resists indoor corrosion, stays neutral in appearance against standard cabinet interiors, and does not add visual bulk beside the drawer box. This is an indoor finish — not rated for damp, exterior, or washdown environments. The slide is non-handed and mounts on the standard 1/2 inch per side clearance, so the drawer box is built one inch narrower than the cabinet opening.
The PRO 5000 at 26 inches fits deep drawer cabinets — under-counter shop stations, lateral file pedestals, and heavy storage bays where a 100 lb slide is undersized and a concealed undermount is overkill. Designers specifying handle-less pull-out shelves with counter overhangs will find the one inch over-travel solves the reach problem cleanly. Cabinet shops running high-volume production can order this slide as a pair and rely on the non-handed design to keep the pick-and-place workflow moving. In face-frame cabinets, rear mounting brackets are required to support the back end of the slide; those brackets are series-specific and sold separately.
Per pair. Each drawer uses two slides, and the 150 lb figure is the combined capacity of that pair. Do not double it by counting each slide separately.
It is a mechanical catch that holds the drawer closed until pulled. It prevents a heavy drawer from rebounding open after a firm close. It does not pull the drawer shut on its own and it does not dampen or slow the closing motion — this is not a soft-close slide.
The slide is 26 inches long. Over-travel carries the drawer member one inch past that nominal length, so the drawer extends approximately 27 inches from closed. Slide length and drawer travel are two separate facts, and the over-travel distance is what makes the rear of the drawer reachable under an overhang.
No. The PRO 5000 is non-handed — both slides in the pair are identical and either one fits either side of the drawer.
Side-mount slides in face-frame cabinets need rear mounting brackets to support the back of the slide, because the cabinet side is set in from the face frame. The brackets are series-specific and sold separately — confirm the correct bracket for the PRO 5000 before ordering.
When the drawer is deep, the load is real, and the cabinet sits under a counter overhang, the PRO 5000 delivers the capacity, travel, and stay-closed reliability to handle it — in a bright zinc finish that works cleanly in any standard cabinet interior.
Sold In: 10 Pair
