Salice 20" 3/4 Extension Self-Close Epoxy Coated Euro Slides A208 Series, Unhanded Side Mount White - A208/50.1

Salice 20 Inch Epoxy Drawer Slides For Cabinets

Salice 20 inch epoxy drawer slides give a 3/4 extension side mount solution that suits many cabinet drawer applications where full access is not required. The slides use a self-closing design with a double safety pull out stop, so drawers are pulled reliably shut and held in position, helping reduce unintended opening during normal use. A sturdy nylon wheel drives the motion of the slide, providing a controlled travel that supports smooth operation across the rated load range. These slides are epoxy coated in white, giving a consistent finish that works with light cabinet interiors and conceals wear on the track. The slides belong to the Salice Adar Series of epoxy drawer slides, produced in Italy, providing a matched system look when used alongside other slides in the same series across a project.

Key Salice A208 20 Inch Drawer Slide Details

• The A208 Series slide is part of Salice Adar Series epoxy drawer slides, so it aligns with a recognized product line that installers can use consistently across multiple cabinets.
• The side mount configuration fits projects that call for a side mounted slide layout, supporting straightforward layout when cabinet construction is already designed for this mounting class.
• The 20 inch length, also described as 500mm, defines the drawer depth these slides support, which helps during cabinet carcass planning and when matching replacement slides to existing drawers.
• The white epoxy finish on the slide provides a clean, neutral appearance, which helps coordinate with light-colored cabinet interiors on both residential and commercial jobs.
• The slide exceeds ANSI Grade 1 certification for commercial applications, so it supports use where a certified performance level is required by project specification or general commercial expectations.
• The design uses a sturdy nylon wheel for a perfect motion, which provides a defined rolling path in the member, supporting repeatable opening and closing of drawers at the rated capacity.

Side Mount Self Closing Drawer Slide Setup

These Salice Adar Series epoxy drawer slides are built as side mount members, so installation aligns with cabinet designs that have clearance and support along both drawer sides. The slides use a self-closing design, which engages near the end of travel to draw the drawer closed for a finished position without relying on external devices. A double safety pull out stop is integrated into the slide, governing how far the drawer can be opened and helping prevent the drawer member from disengaging unintentionally during normal operation. The 3/4 extension layout allows the drawer to project a substantial portion of its length while still keeping part of the slide engaged inside the cabinet, which can be important when prioritizing stability over full access.

Using These Drawer Slides In Real Projects

Where Salice Adar Epoxy Drawer Slides Fit Best

Salice Adar Series epoxy drawer slides fit projects that call for side mount drawer slide installation with a 20 inch nominal length. The 500mm sizing suits cabinet cases planned around metric or imperial measurements, giving flexibility in layout drawings. The white epoxy coated finish supports use in cabinets where the slide will be visible when the drawer is open, aligning with white or light interiors so the hardware does not visually dominate the space. Because the slides exceed ANSI Grade 1 certification for commercial applications, they are suited for environments where drawers see repeated daily cycles, such as commercial millwork or similar workloads. The load capacity rating of 75 lb dynamic and 100 lb static defines how these slides can support typical stored contents in drawers within those limits across normal use.

Details That Support Consistent Drawer Performance

The self-closing design of these slides, combined with the double safety pull out stop, supports consistent closing behavior at the end of travel, which helps drawers return to a predictable seated position against the cabinet. The sturdy nylon wheel is part of the motion system, rolling within the slide member to control movement and support the rated load during opening and closing, which can reduce uneven wear compared to sliding contact surfaces. The 3/4 extension configuration helps keep a portion of the slide engaged inside the cabinet at full open position, supporting lateral stability when drawers carry weight near the front. Model A280R in the Adar Series has a cam height adjustment feature of plus or minus 1.5mm affixed to each drawer member, which allows that model to adjust drawer front alignment up or down within that range for fine tuning reveals. These slides are installed with #6 flat head wood screws, so the mounting interface is defined for planning pilot holes and selecting the correct screw type for wood drawer sides and cabinet members.

Common Questions About Salice A208 Drawer Slides

Selecting Salice 20 Inch Slides For Your Job

Salice 20 inch epoxy drawer slides provide a 3/4 extension, self-closing, side mount option with a white epoxy finish and ANSI Grade 1 performance, so they address both functional and appearance requirements. The 75 lb dynamic and 100 lb static load capacity ratings define how they support real-world drawer contents, while the sturdy nylon wheel and double safety pull out stop contribute to consistent motion control. When a project calls for 20 inch side mount euro slides with these characteristics, choosing this Salice Adar Series A208/50.1 model aligns the installation with a clearly defined set of specifications.