
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Salice 20 inch epoxy drawer slides provide a 3/4 extension self-close Euro solution that supports commercial cabinet projects where consistent performance matters. The A208 series unhanded side mount design lets installers use the same slide on either side, simplifying layout and reducing part sorting on the job. The white epoxy finish gives these side mount drawer slides a clean look that coordinates with light interiors while supplying a coated surface suited to everyday cabinet use. A sturdy nylon wheel on each slide supports a smooth motion, so drawers travel predictably along the case member during opening and self-closing. The self-closing feature pulls the drawer shut at the end of travel, which helps drawers seat fully in busy environments. Exceeding ANSI Grade 1 certification for commercial applications, these slides are engineered to handle regular use in demanding settings.
The Salice A208 series functions as a side mount drawer slide, so it fastens directly to the cabinet side and the drawer member. This layout works well in frameless and similar case designs where side mounting is standard. Installation uses #6 flat head wood screws, giving installers a common fastener type that seats flush in properly sized holes. The model A280R referenced in the series description adds a cam height adjustment feature of plus 1.5 mm on each drawer member, which provides fine vertical tuning between drawer and cabinet. That adjustment capability helps align fronts and maintain even reveals across a run of drawers when using compatible members in the same system.
The Salice A208 20 inch 3/4 extension self-close slides are suited to commercial applications where ANSI Grade 1 performance is required, so they match projects such as institutional, office, or other high-traffic cabinetry. The 20 inch length pairs with drawers built around a 500 mm depth, keeping case planning straightforward when standardizing on a single slide size within a bank. With their side mount drawer slide configuration, these slides integrate well into constructions that rely on side panel mounting surfaces for hardware. The white epoxy coated Euro slide style supports installations where an epoxy drawer slide appearance is preferred inside cabinets. Because the slides are unhanded, they adapt readily to left and right drawers across a room without separate part tracking.
The load capacity rating of 75 lb dynamic and 100 lb static gives these Salice America drawer slides the strength to sustain typical commercial drawer contents under motion and at rest, supporting long-term function under design loads. The self-closing design works with the sturdy nylon wheel to create a motion that both guides the drawer and finishes the close, so drawers seat consistently without relying on the user to push them fully home. The double safety pull out stop helps control how far the drawer travels during opening, which supports predictable extension of the 3/4 travel range. Exceeding ANSI Grade 1 certification indicates the slides have been evaluated for demanding commercial use, giving project builders a defined performance benchmark instead of guesswork. When combined with the cam height adjustment feature available on model A280R within the system, installers gain a method to fine-tune drawer elevation for precise alignment in modular cabinet runs.
The Salice A208 series is a side mount drawer slide with a 3/4 extension Euro design, so it supports drawers that mount to the cabinet sides while providing partial extension for everyday access.
These Salice 20 inch epoxy drawer slides have a 75 lb dynamic and 100 lb static load capacity, allowing drawers to operate under typical commercial loading without overstressing the slide members.
The self-closing design on these slides pulls the drawer shut near the end of travel, helping drawers return fully into the cabinet and improving day-to-day usability in commercial environments.
The sturdy nylon wheel on each slide supports a perfect motion, so the drawer moves smoothly along the case member and maintains controlled travel during opening and closing.
Model A280R in the series offers a plus 1.5 mm cam height adjustment on each drawer member, allowing fine vertical tuning between drawer and cabinet for improved alignment.
These Salice Adar Series epoxy drawer slides install with #6 flat head wood screws, so fastening uses a familiar screw style that seats flush in countersunk mounting holes.
Salice 20 inch epoxy drawer slides in the A208 series combine self-closing action, ANSI Grade 1 commercial performance, and a white epoxy coated Euro design that suits many cabinet interiors. With side mount installation, unhanded configuration, and a sturdy nylon wheel supporting smooth motion, these slides give builders a defined 75 lb dynamic and 100 lb static capacity to plan around. For projects using 20 inch deep drawers and Euro epoxy slides, this Salice America model provides a consistent hardware choice across commercial casework runs.
Sold In: 25 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | UBASO208NANDL Mfr# ASO208NANDL | Rear Mounting Sockets, Left Side - 200 Each | ||||
Sold in: 1 Each | UBASO208NANDR Mfr# ASO208NANDR | Rear Mounting Sockets, Right Side - 200 Each |