Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Salice A208 Series 18 inch white epoxy Euro slide is a side-mount, roller-bearing drawer slide built for cabinets where an 18 inch run is the right fit. It delivers a self-closing ramp and a white epoxy finish in an unhanded design, so there is no left-right sorting at the bench.
The 18 inch (450mm nominal) length suits shallower cabinet runs: bathroom vanities, nightstands, upper cabinet pull-outs, and kitchen base cabinets on the shorter end of the depth range. It also works well in face-frame casework where the interior depth runs tighter than a 20 or 22 inch slide allows. In face-frame installations, plan for rear mounting support to bring the back end of the slide flush with the frame setback. The A208 is matched to drawer material from 1/2 inch up to 3/4 inch thick, and the drawer box should be built 1 inch narrower than the inside cabinet opening to leave the required 1/2 inch of clearance per side.
The A208 is formed steel with a white epoxy powder-coat finish. Epoxy is a baked-on coating applied specifically to blend with white or light cabinet interiors, not a structural or corrosion-resistant upgrade. The nylon rollers run on the steel profiles quietly and without lubrication under normal indoor cabinet use. This is a standard-duty indoor slide; it is not rated for damp, wet, or exterior environments.
Cabinet shops running production orders of vanity and bathroom drawers favor this length because shorter runs often need a size the full-depth kitchen slide does not cover. Remodelers replacing worn slides in existing casework reach for it when the original slide was built around an 18 inch cabinet depth. Designers specifying hardware for compact furniture pieces and built-ins also land here when drawer depth is constrained. The unhanded format means a single SKU covers all positions on a multi-drawer piece without separate left and right line items.
Self-close. The A208 uses a mechanical ramp that pulls the drawer home once it enters the closing zone. That is a positive, undamped close. Soft-close uses a damper to slow and cushion the last inch of travel; this slide does not include one.
No. This slide is non-handed, so one part number covers both sides of the drawer. Order two of the same SKU to complete a single drawer.
This is a 3/4-extension slide. On an 18 inch slide, the rear few inches of the drawer remain inside the cabinet at full open. If you need the entire drawer contents reachable from the front, look at a full-extension slide instead.
Yes, with the right rear support. Face-frame cabinets set the cabinet side back from the front frame, so the back end of the slide needs a rear socket or mounting bracket to stay level. Those components are sold separately and are series-specific.
The A208 accommodates drawer material from 1/2 inch (12.7mm) up to 3/4 inch (19mm) thick, covering the most common drawer box stock used in cabinet production.
When the cabinet depth calls for 18 inches and the interior should stay clean and white, the Salice A208 in this length covers the job without left-right complexity or finish mismatch.
Sold In: 25 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  UBASO208NANDL Mfr# ASO208NANDL | Salice Rear Mounting Socket, Left Hand, ASO208NANDL | ||||
Sold in: 1 Each |  UBASO208NANDR Mfr# ASO208NANDR | Salice Rear Mounting Socket, Right Hand, ASO208NANDR |