Salice 16" 3/4 Extension Self-Close Epoxy Coated Euro Slides A208 Series, Unhanded Side Mount White - A208/40.1CP25XD

Salice 16 Inch Epoxy Drawer Slides Use

Salice 16 inch epoxy drawer slides give a 3/4 extension travel, which lets the drawer open far enough for easy access while keeping some slide length engaged for support in typical cabinet depths. The self-closing design pulls the drawer shut at the end of travel, which helps drawers return to a consistent closed position in everyday commercial or residential use. An epoxy coated Euro slide construction provides a smooth, coated track surface, which helps the sturdy nylon wheel roll cleanly along the member for controlled motion. The white epoxy finish presents a neutral interior color, which works cleanly behind light-colored drawer boxes. An unhanded side mount configuration allows the same member design on either side of the drawer, which can simplify layout when installing multiple cabinets. The Adar Series slides are made in Italy, which identifies their Salice manufacturing origin.

Key Slide Details For Cabinet Projects

• The Salice Adar Series epoxy drawer slides are made in Italy, tying the hardware to a known manufacturing source that supports consistent use across similar projects.
• These slides are described as exceeding ANSI Grade 1 certification for commercial applications, aligning them with demanding drawer use in commercial environments where higher cycle expectations are common.
• The 16 inch length (400mm) matches standard mid-depth drawer designs, helping the slide length correspond to common cabinet carcass dimensions during layout.
• A sturdy nylon wheel is used for a perfect motion, so the rolling contact manages the drawer movement along the epoxy coated track for controlled opening and closing.
• The self-closing design with double safety pull out stop guides the drawer into the closed position while limiting over-travel, which supports repeatable operation in daily use.
• The load capacity is listed as 75 lb dynamic and 100 lb static, giving clear working and at-rest loading references when planning drawer contents.

Installation And Side Mounting Details

These Salice 16 inch 3/4 extension self-close slides are built as side mount drawer slides, so they fasten along the drawer sides and cabinet interior walls in a typical Euro slide arrangement. The product is described as a side mount drawer slide in the product class, which frames it for cabinet designs expecting lateral support rather than bottom-mounted hardware. Installation is described using #6 flat head wood screws, which points to a fastener size and head style that seats into the slide holes for flush mounting on wooden drawer boxes and cabinet sides. The white epoxy finish on the slide members stays visible along the side clearance, so it visually coordinates with light interiors after installation.

Where These Salice A208 Slides Fit Best

Using Salice A208 Slides In Cabinets

The Salice 16 inch 3/4 extension self-close epoxy coated Euro slides A208 Series, unhanded side mount white, are positioned for drawer slide roles in cabinet projects where side mount Euro slides are specified. The 3/4 extension function lets drawers project a substantial distance, which suits many storage drawers that do not require full extension but still benefit from accessible reach. The self-closing design engages at the final part of the stroke, helping drawers seat fully so faces align consistently with surrounding fronts. A double safety pull out stop is noted, which means the mechanism restrains the drawer travel at its designed opening point, helping limit accidental over-extension in busy commercial or shop environments. The white epoxy finish pairs with the Euro slide profile, so the hardware runs quietly along the cabinet side clearances while presenting a clean appearance when drawers are opened.

Details That Support Repeatable Drawer Results

These slides are described as exceeding ANSI Grade 1 certification for commercial applications, which ties the A208 Series to a performance level aligned with commercial drawer use where frequent opening cycles are expected. The 75 lb dynamic load capacity communicates how much active load the slides are intended to carry during movement, and the 100 lb static load capacity indicates the supported load when the drawer is at rest, both of which guide planning for typical storage weights. Model A280R in the line is described as having a cam height adjustment feature of plus or minus 1.5mm affixed to each of the drawer members, which illustrates how Salice Euro slide members can integrate fine height tuning at the drawer connection point. The sturdy nylon wheel mentioned in the description is part of the running gear that travels on the epoxy surface, which helps the drawer track move in a controlled path along the side mount profile under load.

Common Questions About Salice A208 Drawer Slides

Choose Salice 16 Inch Slides For Targeted Use

Salice 16 inch epoxy drawer slides with 3/4 extension, self-closing action, and side mount Euro design align with cabinet projects calling for controlled drawer travel and defined load capacity. The white epoxy finish, sturdy nylon wheel, and stated 75 lb dynamic and 100 lb static capacities give clear working parameters when planning storage drawers. For installations designed around Euro side mount hardware, these A208 Series slides supply the specific length, extension, and self-closing behavior needed to match a consistent cabinet hardware standard.