Rod Support with Pins, Dull Brass Finish

Closet Rod Flange Oval 5mm Pins For Rod Support

Closet rod flange oval 5mm pins defines this Pro Value Series rod support as a mounting point for an oval closet rod in a 32mm system. The flange is made of a zinc alloy, so it provides a solid metal bearing surface that helps spread load from the closet rod into the cabinet side or support panel. Its dull brass finish gives the flange a brass-toned appearance that works where a warm metal look is preferred on closet fittings. Two 5mm pins on the flange are designed for use in 32mm systems, so the pins fit into system holes to locate the flange relative to the cabinet drilling pattern. A single screw hole adds a direct fastener point that ties the flange to the panel, so the assembly resists pull-out during regular loading of the rod.

Key Rod Support Details For Closet Projects

• The zinc alloy flange body forms a rigid base for the closet rod, which helps transfer hanging loads into the panel instead of concentrating stress on a thin bracket.
• The two 5mm pins interface with 32mm system holes, so the flange aligns consistently along a system line, helping rods match adjacent hardware centerlines.
• The single screw hole provides a fixed mechanical connection, which locks the flange in position and resists shifting when the rod is loaded from different directions.
• The dull brass finish gives the rod support a muted brass tone, which suits closet interiors where a softer metallic finish coordinates with other brass-colored components.
• The oval configuration matches oval closet rod profiles, so the bearing surface seats against the tube shape, helping reduce point pressure on the rod wall.

Rod Flange Mounting Details For 32mm Layouts

The flange uses two 5mm pins for use in 32mm systems, so it is positioned by inserting the pins into system rows that follow the 32mm drilling pattern. This pin location approach means the installer uses existing 5mm holes to establish the rod height and setback, which keeps rod positions consistent along the run. The single screw hole then secures the flange to the panel, so the rod support stays fixed when hangers slide or when garments are moved. Because the flange is made of a zinc alloy, the mounting face remains stable under typical closet rod loading, which supports long-term alignment with the mating oval rod.

Closet Rod Flange Use In Closet And Cabinet Runs

Where This Oval Closet Rod Flange Fits Best

This Pro Value Series rod support with pins is part of the Shelf, Closet & Garage Organization category under Closet Tubing & Flanges, so it is suited to closet rod runs where organized hanging space is needed. The oval form and zinc alloy construction let it act as a stable support point for an oval closet rod, so it works along cabinet interiors or closet partitions built around closet tubing. The two 5mm pins for use in 32mm systems align the flange to standard system hole layouts in cabinetry, so it fits into casework where rows of 5mm bores have already been drilled on a 32mm grid. The dull brass finish helps this flange match other dull brass closet fittings, which keeps visible hardware consistent throughout a closet installation. Because it is part of a Closet Rods & Flanges product class, this flange fits into assemblies where an oval rod needs a defined bearing and locating point at each end or intermediate support position.

Why These Rod Support Details Improve Installation Results

The zinc alloy body of the closet rod flange carries rod loads into the cabinet panel, so the support resists deformation during daily use and helps maintain rod height along its length. The two 5mm pins for use in 32mm systems control the flange position in both vertical and horizontal directions, so the rod centerline tracks accurately with other 32mm-based components such as shelves or additional rod levels. Using a single screw hole along with the pins gives the installer one primary fastening point, which simplifies fastening while still locking the flange against movement under side loading from coat hangers. The dull brass finish of the rod support with pins, dull brass finish version provides a consistent brass tone, so the visible hardware at each rod end looks uniform when doors are open. Since the part carries the manufacturer part number 54111 47 051 and the SAP description "CLOSET ROD FLANGE, OVAL W/5MM PINS, DB," it can be referenced precisely in closet layouts or material lists, which reduces errors when ordering matching rod supports for multiple closet sections.

Common Questions About This Dull Brass Rod Flange

Select This Oval Flange For 32mm Closet Runs

The Pro Value Series rod support with pins, dull brass finish combines an oval closet rod flange shape with two 5mm pins and a single screw hole, so it ties directly into 32mm system layouts while providing a secure rod bearing point. Its zinc alloy construction and dull brass finish give a metal support with a brass-toned appearance that matches dull brass closet hardware. For closet tubing and flange projects built around 32mm cabinet drilling, this specific dull brass oval closet rod flange offers a defined way to mount and align an oval rod along panels and partitions.