
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Rod Support with Pins is a Pro Value Series closet rod flange designed to support oval closet tubing so the rod seats securely at each end of a run. The flange is made of a zinc alloy, which provides a rigid, metal bearing surface that handles the weight of hanging garments in everyday closet use. Its dull chrome finish gives the flange a neutral, low-glare appearance that suits practical storage spaces where a clean, functional look is important. The flange uses two 5mm pins for use in 32mm systems, so it locates accurately in cabinet side panels drilled on a 32mm line and keeps both ends of the rod at the same height. A single screw hole supplements the pins, tying the flange positively into the panel so it stays in position during loading and normal use.
This closet rod flange uses two 5mm pins for use in 32mm systems, so it seats into standard 5mm system holes during installation and naturally aligns with other 32mm-based hardware in the panel. The single screw hole at the body of the flange then lets the installer fix the part in place, so the combination of pins and screw holds the oval closet rod at a consistent height. Because the flange is designed for oval closet tubing, it supports the profile across its bearing surface, which helps distribute rod load toward the panel. The dull chrome finish on the flange keeps the mounting area unobtrusive along the cabinet side, which can be useful in closet and storage layouts where the hardware should look orderly but not draw attention.
This Rod Support with Pins is part of the Shelf, Closet & Garage Organization offering, so it fits into projects where oval closet tubing is used to hang garments or gear inside cabinets or framed closet sections. As a Closet Rods & Flanges component with two 5mm pins for use in 32mm systems, it matches cabinet side panels drilled on the 32mm pattern that is common in system furniture and closet installations. The dull chrome finish makes the flange visually compatible with typical metal closet rods used in practical storage spaces, so the transition between rod and support looks uniform across the run. Because the flange is designed for oval closet tubing, it is suited to closet layouts where an oval rod profile is preferred over a round tube for hanging storage.
The zinc alloy flange body provides a solid, stable base for the oval closet rod, which supports the rod under the weight of garments and reduces flex at the ends of the span. The two 5mm pins used in 32mm systems position the part without measuring off edges, so both sides of the cabinet can be drilled on the same system row and the rod seats level. Once the flange is seated on its 5mm pins, the single screw hole lets the installer secure the flange so it resists pull-out and twisting when the rod is loaded or bumped during everyday use. The dull chrome finish on the flange keeps the metal surface visually consistent with other practical hardware in the closet, which helps the overall installation look deliberate and professional in service.
The Rod Support with Pins is designed for oval closet tubing, so it cradles an oval-profile rod and carries hanging loads at each end of the span.
The two 5mm pins seat into 32mm system holes in cabinet sides, positioning the flange on the drilling pattern so both rod ends align vertically and horizontally.
The single screw hole allows the zinc alloy flange to be fastened to the panel, so the pins handle alignment while the screw locks the flange against pull-out forces.
The zinc alloy construction provides a rigid metal body that supports the oval closet rod under everyday hanging loads and helps maintain the flange shape over time.
This rod support is part of the Shelf, Closet & Garage Organization range, so it is suited to closet tubing installations in closets, cabinets, and storage sections.
The dull chrome finish provides a muted metallic look that blends with common closet rods, giving the hardware a functional, understated appearance along cabinet sides.
This Rod Support with Pins from the Pro Value Series combines a zinc alloy flange body, an oval closet tubing seat, and two 5mm pins for use in 32mm systems, so it suits system-drilled closet cabinets. The single screw hole lets the installer lock the flange to the panel, turning pin alignment into a stable rod support point. For closet, shelf, and garage organization projects that use oval closet tubing on a 32mm layout, this dull chrome flange offers a matched mounting point for each end of the rod.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | UF54111-46-068 Mfr# 54111 46 068 | Rod Support with Pins, Chrome Finish | ||||
Sold in: 1 Each | UF54111-47-051 Mfr# 54111 47 051 | Rod Support with Pins, Dull Brass Finish | ||||
Sold in: 1 Each | UF54111-49-086 Mfr# 54111 49 086 | Rod Support with Pins, Dull Nickel Finish | ||||
Sold in: 1 Each | UF54111-51-052 Mfr# 54111 51 052 | Rod Support with Pins, Matte Black Finish | ||||
Sold in: 1 Each | UF54111-53-008 Mfr# 54111 53 087 | Rod Support with Pins, Oil-Rubbed Bronze Finish |