Closet Rod Flange Oval With 5mm Pins Use

closet rod flange oval with 5mm pins describes a Pro Value Series rod support that holds an oval closet rod in place for hanging space that lines up cleanly along your cabinet run. The zinc alloy construction forms a rigid support point, so the rod carries normal closet loads without the support deforming under weight. The matte black finish presents a dark, uniform appearance on exposed ends, which helps the hardware blend with black rods or contrast consistently against lighter cabinet interiors. The oval design matches oval closet tubing, so the rod nests into the flange shape instead of resting on a flat plate, which helps control side play at the end of the rod. The manufacturer part number 54111 51 052 identifies this specific matte black version, which matters when matching existing hardware or reordering for multiple cabinets on the same job.

Key Rod Support Details That Help Jobs Go Smoothly

• The zinc alloy flange body creates a solid bearing surface for the closet rod, which supports hanging loads while limiting distortion at the mounting point during everyday use.
• The matte black finish establishes a consistent dark appearance at each support, which keeps the visible hardware coordinated when rod ends are in direct view inside open closets.
• The oval form is shaped for oval closet rods, which positions the tubing in a controlled seat so the rod tracks straight and resists rotation at the ends.
• Two 5mm pins are built into the flange for use in 32mm systems, which lets the support locate off system holes for predictable spacing between panels.
• A single screw hole is provided through the flange, which allows the installer to lock the support to the panel so the rod stays fixed during service.

Mounting And Alignment For 32mm Closet Systems

This closet rod flange uses two 5mm pins sized for 32mm systems, so the body locates directly in system holes without separate layout across the panel face. That pin engagement holds the position while drilling for the single screw, which simplifies working inside tall cabinets where clamping is limited. The single screw hole then draws the zinc alloy flange tight to the panel, which reduces any gap that might let the rod rock under load. The oval opening aligns the rod centerline relative to the pin pattern, which helps keep rods at a consistent height across multiple sections laid out on the same 32mm grid.

Using This Matte Black Rod Support In Closet Runs

Where This Oval Rod Support Works Best

This Pro Value Series rod support with pins is made for closet and cabinet runs using oval closet tubing, so it fits directly into closet, shelf, and garage organization layouts that rely on that profile. The zinc alloy flange sits at the side panel, serving as the end bearing for the rod, which gives each section a defined end stop so hangers stay on the rod. The matte black finish ties into other black organizational hardware, so it is suited to modern closet interiors where visible fittings need a coordinated appearance. Because the flange is part of the Closet Rods & Flanges class, it integrates naturally wherever oval rods terminate at cabinet sides or partitions.

Why Pins And Finish Matter For Repeatable Results

The two 5mm pins designed for 32mm systems let the installer seat the flange directly into line-bored holes, which keeps vertical and horizontal rod position consistent across doors and panels on a project. That pin-based registration minimizes cumulative layout error between sections, which is important when aligning multiple rods under shared shelves. The single screw hole then provides the mechanical lock, so once tightened the zinc alloy body stays fixed under repeated loading. The matte black finish offers a defined visual end to the rod, which gives the run a finished look when the cabinet is open. The clearly defined manufacturer part number 54111 51 052 allows repeat ordering of the same color and form, which supports uniform results on expansions or service work.

Common Questions About This Pro Value Rod Flange

Selecting This Flange For 32mm Closet Runs

This matte black Pro Value Series closet rod flange with two 5mm pins and a single screw hole offers a defined way to mount oval closet rods in 32mm-based cabinets. For projects needing zinc alloy rod supports that align cleanly on a system grid, this specific 54111 51 052 flange delivers a matched form, finish, and mounting pattern across each closet section.