PRO Value Closed Round Flange For 1-5/16" Round Tubing, Polished Chrome, 54233 46 027

1-5/16 Inch Diameter Closed Flange For Closet Rods

1-5/16 inch diameter closed flange describes a Pro Value Series fitting designed to hold a 1-5/16 inch diameter outside dimension round closet tube. This defined tube size sets a clear match for standard round closet rods in many storage layouts, so installers can select it when the rod diameter is known. The closed flange design creates a positive seat around the rod end, helping position the tube at a fixed point on the wall or panel. That fixed positioning supports consistent rod height and alignment across multiple openings, which is important when building runs of closets or matching existing rows.

This closet rod flange sits in the Shelf, Closet & Garage Organization family under Closet Tubing & Flanges, so it is intended as part of a rod support system rather than general-purpose hardware. That category focus helps place it correctly in project planning when specifying closet rods and matching supports together.

Closet Rod Flange Details That Support Install Jobs

• Flanges are made of a zinc alloy, providing a metal body around the rod end that handles typical closet loading and helps resist deformation during normal use.
• Flanges are made of a zinc alloy, so they can be drilled and fastened using standard methods, which supports straightforward installation into common wood panels or supports.
• Holds a 1-5/16 inch diameter outside dimension tube, giving a defined fit that centers this specific rod size so the bar seats firmly for hanging garments.
• Holds a 1-5/16 inch diameter outside dimension tube, which simplifies layout because installers can match this dimension to rod stock without extra measuring.
• Flanges have three screw holes, providing three-point fastening that helps spread load on the mounting surface and aids in keeping the flange from twisting under everyday use.
• Flanges have three screw holes, so installers gain multiple anchor points to tighten the flange down and establish a stable bearing point at each end of the closet rod.
• Polished chrome finish on the flange presents a bright surface at the rod connection, which supports a finished look when rods are exposed in closet and storage areas.
• Polished chrome finish pairs visually with polished chrome rods, allowing the flange and tube to read as a unified component in the finished installation.

Mounting And Fit For Round Closet Rods

This Pro Value Series closed flange is built to hold a 1-5/16 inch diameter outside dimension round tube, so the rod end nests directly inside the fitting for a defined fit. That fit helps control side play at the rod support point, which matters when doors, partitions, or shelves run close to the hanging space. The flange has three screw holes arranged for mechanical fastening to a wall or panel, giving installers multiple anchor locations to secure the support. That three-point mount helps keep the rod seat stable over time, supporting reliable performance in everyday closet use.

Using This Pro Value Series Closet Rod Flange

Where This Closed Flange Works Best

This Pro Value Series 1-5/16 inch diameter closed flange is part of the Closet Rods & Flanges product class, positioning it specifically for closet rod support rather than general structural work. In practice, that means it is suited to hanging garment rods and similar storage tubes within the Shelf, Closet & Garage Organization category. The flange is designed to hold a 1-5/16 inch diameter outside dimension tube, so it naturally aligns with installations that already specify this rod size, such as standard round closet rods in bedroom or hallway closets.

The polished chrome finish points this flange toward applications where the hardware is visible and needs to match polished chrome tubes or other bright fittings in the space. That consistent finish helps maintain a uniform appearance at both rod ends, which matters when building coordinated closet systems or matching other chrome hardware in the room. The zinc alloy construction places a solid metal at the rod bearing point, appropriate for typical hanging loads in residential or light commercial closet systems.

Details That Support Consistent Rod Installation

The defining functional detail is that this closed flange holds a 1-5/16 inch diameter outside dimension tube, which sets the relationship between the rod and the support. Because the diameter is specified, installers can pair it directly with 1-5/16 inch round closet tubing without additional fit trial, supporting repeatable installations across multiple openings or units. The closed design at the flange end captures the tube, helping to control rod movement and aiding in setting rod length from wall to wall.

The flange body is made of a zinc alloy, so its structure provides a rigid seat for the tube during normal use. This metal body works with the three screw holes to tie the flange securely to the mounting surface, spreading load across three fastener points. That layout supports stable long-term positioning of the rod, especially when used in pairs at each end of the tube. The polished chrome finish adds a clean appearance around the mounting area, complementing polished chrome rods so the joint reads as a continuous element along the closet interior.

Key Questions About This Closet Rod Flange

Select This Flange For Defined 1-5/16 Inch Rod Fit

This Pro Value Series 1-5/16 inch diameter closed flange pairs directly with 1-5/16 inch outside dimension round closet tubing, giving a clear fit point for rod ends. The zinc alloy body with three screw holes provides a solid, three-point mounted support suitable for typical closet hanging loads. Its polished chrome finish aligns with polished chrome rods, helping installations read as a coordinated system. For projects built around 1-5/16 inch round closet rods, this flange offers a defined, part-numbered solution with a finish and mounting layout tailored to closet and storage applications.