1-5/16 Inch Diameter Closed Flange For Round Rods

1-5/16 inch diameter closed flange defines this Pro Value Series fitting as a dedicated support for round closet rods with a 1-5/16 inch outside dimension, so rods seat securely in the flange and carry hanging loads along the closet span. The closed flange design surrounds the rod end, which helps keep the tubing captured during use and reduces lateral movement at the mounting point. Flanges are made of a zinc alloy, giving the installer a solid, cast-style component that stands up to typical closet installation environments. The dull chrome finish presents a neutral, low-sheen look that works well with many rod finishes and does not draw attention in open closets. As part of Wurth Baer Supply's closet tubing and flanges offering, this flange fits directly into closet, shelf, and garage organization layouts where a 1-5/16 inch round tube is specified.

Key Closet Flange Details For Daily Use

• Flanges are made of a zinc alloy, providing a rigid base for the rod so the connection at the wall or panel stays stable during loading and unloading of garments.
• The design holds a 1-5/16 inch diameter outside dimension tube, giving a positive fit that keeps standard 1-5/16 inch round closet rods aligned along the run.
• The closed flange style surrounds the rod end, which helps contain the tubing and supports end-of-run terminations in closet, shelf, or garage layouts.
• Flanges have three screw holes, allowing the load to be distributed across three fastener points and helping the rod support perform consistently over time.
• The dull chrome finish offers a muted metallic appearance that integrates easily with common closet hardware and helps maintain a clean, uniform look.

Closet Rod Flange Mounting And Fit Details

The flange holds a 1-5/16 inch diameter outside dimension tube, so the rod-to-flange interface is sized for common 1-5/16 inch round closet tubing specified in many closet systems. Flanges have three screw holes, which sets up a three-point mounting pattern to spread pull-out forces into the substrate during everyday use. The closed flange construction captures the rod end, helping maintain alignment lengthwise and limiting rod shift when hangers are moved along the tube. With its dull chrome finish, the flange pairs visually with dull chrome closet rods and other similar hardware in the same installation.

Using This Pro Value Series Flange In Projects

Where This Closed Flange Fits Best

This closed flange for round closet rods belongs in closet, shelf, and garage organization projects wherever a 1-5/16 inch outside diameter round tube is the specified hanging member. As a Pro Value Series component in the Closet Rods & Flanges product class, it aligns directly with typical residential and light commercial closet designs that call for a continuous 1-5/16 inch round rod along walls or between panels. The zinc alloy body provides a solid endpoint or support for such tubing at vertical panels or end walls, translating the hanger load into the structure through the three screw holes. Because the design is closed around the rod end, it is especially suited to terminations at end walls where the geometry of the flange helps keep the tubing captured as garments are added and removed over the life of the installation.

Details That Support Consistent Closet Rod Alignment

The fact that the flange holds a 1-5/16 inch diameter outside dimension tube means the installer works with a defined engagement between the rod and the fitting, which supports straight runs when the mating rod is cut and placed correctly. The three screw holes give the option to balance fasteners around the circumference of the base, which helps the flange resist twisting as hangers are pushed or pulled along the rod. With flanges made of a zinc alloy, the component maintains its shape under typical hanger loads, supporting repeatable performance when multiple flanges are used along longer rods. The dull chrome finish ties visually to dull chrome closet rods, so replacement or expansion work using the same diameter tubing can maintain a uniform appearance from one section of the closet to another.

Common Questions About This Closet Rod Flange

Selecting This Flange For Your Closet Layout

This 1-5/16 inch diameter closed flange in dull chrome from the Pro Value Series matches projects that specify a 1-5/16 inch outside dimension round closet rod and require a captured end support. Using a zinc alloy flange with three screw holes provides a stable base for typical closet, shelf, and garage organization runs. For layouts built around Wurth Baer Supply closet tubing and flanges, this component aligns closely with standard 1-5/16 inch round rod designs.