1-5/16" Diameter Closed Flange for Round Closet Rods, Oil-Rubbed Bronze Finish

1-5/16 Inch Diameter Closed Flange For Closet Rods

1-5/16 inch diameter closed flange for round closet rods is a Pro Value Series component that supports a 1-5/16 inch diameter outside dimension tube, so it matches standard round closet rod tubing where that dimension is specified. The flange design is closed around the rod, which helps seat the tube positively at the wall end and reduces rod movement at the support point during daily use. The oil-rubbed bronze finish on this flange provides a dark, finished look that ties into oil-rubbed bronze closet and cabinet hardware, giving continuity across rods and other visible fittings. This part sits in the Shelf, Closet & Garage Organization family under Closet Tubing & Flanges, positioning it for typical closet rod runs, wardrobes, and similar storage layouts where a fixed wall support is needed.

Closet Flange Details That Support Daily Use

• The flange holds a 1-5/16 inch diameter outside dimension tube, so it pairs with closet rods built to that sizing and helps keep alignment predictable between left and right supports.
• The closed flange layout captures the round closet rod at the end, which helps resist sideways slip at the wall and keeps hanging space more stable along the length of the tube.
• The oil-rubbed bronze finish establishes a consistent dark tone at each support point, which matters when rods and flanges are exposed and need to visually match other bronze-finished components.
• The flange is made of a zinc alloy, so the body is a metal casting that provides a solid bearing surface for the closet rod where it meets the wall.
• Three screw holes are formed in the flange, giving three-point mounting so the installer can spread load across the wall surface and help the rod handle everyday hanging weight.

Mounting And Fit For 1-5/16 Inch Rods

This flange is built for closet rods with a 1-5/16 inch diameter outside dimension, so layout work can be based on that diameter when drilling, cutting, and positioning the tube. The closed pattern holds the end of the round rod in a defined pocket, which helps with centering the rod on the wall fasteners and keeping the rod at a consistent projection from the mounting surface. Three screw holes in the zinc alloy flange let the installer use a three-point pattern, which spreads the load and helps the rod stay seated against the wall over time. The oil-rubbed bronze finish on the flange means the mounting point will visually match an oil-rubbed bronze rod of the same diameter, keeping the transition from wall to tube clean and unified.

Using This Oil Rubbed Bronze Closet Rod Flange

Where This Zinc Alloy Flange Fits Best

This Pro Value Series flange is part of the Closet Rods & Flanges product class, so it is intended for closet, wardrobe, and storage applications that rely on round hanging tubes. Its ability to hold a 1-5/16 inch diameter outside dimension tube aligns it with common round closet rod stock and related closet tubing systems, allowing it to serve at the end of a hanging run. The closed flange profile suits wall terminations where the rod needs a defined seat rather than an open cradle, such as side walls of reach-in closets and wardrobe cabinets built around 1-5/16 inch rods. Because the flange uses three screw holes, it is suited to mounting locations where a three-point pattern can be used to anchor into the supporting structure.

Why These Flange Details Support Reliable Runs

The zinc alloy construction of this closet rod flange creates a rigid mounting body, which helps maintain the rod centerline under everyday hanging loads along the tube. The oil-rubbed bronze finish is applied to the flange so the visible hardware at the wall aligns with rods and other bronze-finished parts, helping projects maintain a consistent appearance between supports and hanging surfaces. By holding a 1-5/16 inch diameter outside dimension tube, the flange gives the installer a precise target size when cutting rods to length and setting the distance between opposing walls. The closed design at the rod end supports the tube all around its circumference, which helps reduce rotation and racking at the mounting point. With three screw holes built into the flange, the mounting load can be distributed across a wider area of the wall surface, supporting day-to-day use in closet and storage layouts that depend on steady rod alignment.

Key Questions About This Closet Rod Flange

Choose This Flange For 1-5/16 Inch Rod Runs

This 1-5/16 inch diameter closed flange for round closet rods from the Pro Value Series combines a zinc alloy body, a closed design, and an oil-rubbed bronze finish to support standard closet tubing runs. The three screw holes provide a stable wall-mounted base for the 1-5/16 inch diameter outside dimension tube, keeping rod alignment consistent in closet and storage projects. For closet installations built around oil-rubbed bronze hardware and 1-5/16 inch round tubing, this flange supplies the fixed wall support that ties the hanging system together.