Pro Value Premiere Series weathered nickel knob gives you a 1-1/4 inch (32 mm) diameter pull point, so fingers land on a predictable grip size across doors and drawers. The Pro Value Series knob design keeps your decorative hardware consistent on a run of cabinets, which helps finished jobs look planned instead of pieced together. A satin nickel finish on this Premiere Series knob provides a neutral, metal look that works with many cabinet finishes, supporting straightforward hardware decisions on mixed projects. The knob projection of 1 inch sets the hand off the door face enough for a solid grab, while staying tight to the front so hardware does not dominate narrow walkways. With a width called out at 1-1/4 inch, this knob presents a balanced footprint on standard cabinet rails and stiles, giving installers a dependable visual proportion.
This Premiere Series satin nickel knob lists a 1-1/4 inch diameter, so layout on cabinet doors and drawers can follow common centerline spacing used with similar round knobs. A projection of 1 inch keeps the knob from standing too far off the face, which helps avoid snags on clothing along narrow runs while still giving room for fingers behind the pull. With width also stated at 1-1/4 inch, the installer works with a true round footprint, simplifying drilling templates and visual alignment with adjacent knobs or pulls. The knob specifies an 8-32 x 1 inch screw size as the mounting fastener, so hole preparation on the cabinet front can be planned around that thread and length when setting up shop jigs.
The Pro Value Series Premiere satin nickel knob fits naturally into decorative hardware and moldings work where a standard round pull is needed. Its 1-1/4 inch (32 mm) diameter is sized for common cabinet doors and drawers, so it suits kitchens, baths, and built-ins that follow traditional knob dimensions. The 1 inch projection keeps the pull compact for tight hallway cabinets, yet allows enough clearance for a firm grip when opening deeper storage. With width matching the diameter at 1-1/4 inch, the knob sits comfortably on face frames without crowding edges or stile reveals, which helps maintain clean sightlines along a run of doors. The satin nickel finish gives a subtle metal tone that pairs well with many door styles, supporting hardware consistency when projects mix painted and wood-grain fronts.
This Premiere Series knob uses zinc die cast material for the body, giving each piece consistent shape and weight from part to part, which helps doors line up visually when knobs are installed in a straight grid. The SZPR5-SN part number clearly identifies this satin nickel, 1-1/4 inch knob inside the Pro Value Series, so reorders for add-on cabinets or service work can match the original installation precisely. Its 1 inch projection, combined with the 1-1/4 inch diameter, provides a known standoff that works well with standard door thicknesses, helping avoid knuckles hitting the door when pulling. The 8-32 x 1 inch screw size spec gives a defined mounting interface, which streamlines jig setup and drilling operations when running multiple cabinet fronts through the shop. With these consistent dimensions and finish, this knob supports repeatable layouts, clean lines, and efficient hardware installation on production and custom jobs.
The SZPR5-SN knob has a 1-1/4 inch (32 mm) diameter and 1-1/4 inch width, giving a compact round footprint that fits typical cabinet doors and drawers without overpowering narrow rails.
The Premiere Series satin nickel knob lists a 1 inch projection, setting the grip slightly off the cabinet face so fingers clear the surface while the hardware stays close to the door.
The Pro Value Series SZPR5-SN knob is zinc die cast, giving a solid metal construction that supports a sturdy hand feel on frequently used doors and drawers.
The Premiere Series SZPR5-SN cabinet knob has a satin nickel finish, providing a smooth, muted metal look that coordinates with many hinge and appliance colors.
This satin nickel cabinet knob specifies an 8-32 x 1 inch screw size, giving installers a defined thread and length to match when planning drilling and mounting operations.
The SZPR5-SN part number identifies this 1-1/4 inch satin nickel Premiere Series knob, making it straightforward to match hardware on future cabinet additions or service work.
The Pro Value Premiere Series weathered nickel knob, part SZPR5-SN, brings a 1-1/4 inch diameter, 1 inch projection, and zinc die cast construction together in a satin nickel finish that fits many cabinet runs. These defined dimensions, the 8-32 x 1 inch screw size spec, and clear Pro Value Series identification support consistent layouts and straightforward reorders. When a project calls for a compact round cabinet knob with a neutral metal look, this Premiere Series satin nickel knob offers a size and finish combination that aligns well with typical door and drawer work.
Sold In: 1 Each
