Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value Premiere Series 3 inch pull gives you a consistent 3 inch (76 mm) center to center grab point, which helps align cabinet doors and drawers across a run. The oil rubbed bronze finish provides a dark, traditional look that can visually tie together doors and drawers in the same room. The pull body is made from zinc die cast, which creates a rigid, uniform shape that supports repeat drilling patterns on multiple fronts. Overall length of 4 inches gives you some finger space beyond the screw centers, which helps when opening heavier drawers. A projection of 1-1/4 inches sets the hand clearance off the face of the cabinet, which can reduce knuckle contact on raised panels. The 1/4 inch width presents a slim front profile, which keeps the hardware visually light while still defining a clear pull point.
The SZPR11-ORB pull uses a 3 inch (76 mm) center to center layout, which sets the distance between mounting holes for drilling jigs and templates. With a 4 inch overall length, the pull extends slightly beyond the hole spacing on each side, which creates a balanced look on both narrow and medium-width fronts. The 1-1/4 inch projection builds in functional clearance from the face of the cabinet, which can help when doors have profiled edges. A 1/4 inch width gives the pull a slim bar shape, which sits neatly on face frames or full-overlay panels without covering too much surface. The 8-32 x 1 inch screw size provides a threaded connection through the panel, which pairs with standard cabinet boring for a straightforward mount.
This oil rubbed bronze cabinet pull from the Premiere Series uses a 3 inch (76 mm) center to center spacing, which lines up well with common cabinet door and drawer layouts in kitchens, baths, and built-ins. Its 4 inch overall length gives enough bar to feel proportionate on both small upper doors and lower base drawers. The 1-1/4 inch projection holds the grip area proud of the surface, which helps keep hands clear of decorative edge profiles or applied moldings. A slim 1/4 inch width keeps the profile compact, which can be helpful when you are fitting hardware near adjacent doors or tight reveals. The oil rubbed bronze finish sets a darker tone on the zinc die cast body, which can visually connect with other bronze-colored components in the room.
The 3 inch (76 mm) center to center measurement on this SZPR11-ORB pull defines an exact drilling distance, which supports the use of jigs or templates for fast, repeatable installation on multiple fronts. Zinc die cast construction creates consistent dimensions from pull to pull, which helps keep lines straight when hardware is viewed across a full cabinet run. The 4 inch overall length and 1-1/4 inch projection work together to provide both finger clearance and a visually balanced stance on the door or drawer. The 1/4 inch width keeps the bar narrow, which makes it easier to position the pull precisely relative to panel edges without overwhelming narrow rails. The 8-32 x 1 inch screw spec ties into standard cabinet drilling practice, which helps keep mounting straightforward across typical residential cabinet builds.
The pull has a 3 inch (76 mm) center to center spacing, 4 inch overall length, 1-1/4 inch projection, and 1/4 inch width, giving a compact profile with practical hand clearance.
The pull is made from zinc die cast, which provides a solid, uniform body suitable for consistent mounting across multiple cabinet fronts.
The pull has an oil rubbed bronze finish, giving a dark, warm appearance that can coordinate with other bronze-finished cabinet components.
The 3 inch (76 mm) center to center spacing sets a standard drilling distance, supporting jig-based layouts and consistent hole placement on doors and drawers.
The pull uses 8-32 x 1 inch screws, matching a common cabinet hardware thread and length for typical door and drawer thicknesses.
This pull is part of the Premiere Series from the Pro Value Series line in the Handles and Pulls class associated with Berenson.
The Pro Value Premiere Series 3 inch (76 mm) center to center oil rubbed bronze pull SZPR11-ORB combines zinc die cast construction with a 4 inch overall length, 1-1/4 inch projection, and 1/4 inch width to support consistent cabinet layouts. The oil rubbed bronze finish and defined dimensions help align appearance and function across doors and drawers. For projects built around a 3 inch center to center drilling standard, this pull provides a coordinated option grounded in clear measurements and a specific finish choice.
Sold In: 1 Each
