Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Oil rubbed bronze cabinet pull describes this Pro Value Series Premiere Series handle, which is a zinc die cast pull in an oil rubbed bronze finish designed for cabinet and furniture doors or drawers where that finish is desired. The center to center measurement of 3-3/4 inches sets the drilling layout, so hole spacing matches common cabinet boring patterns for straightforward change-outs. The overall length of 4-1/4 inches provides a comfortable hand grip area, which helps when operating heavier drawers and doors. A projection of 1-7/16 inches positions fingers away from the cabinet face, which reduces knuckle contact on thicker fronts. The 1/2 inch width keeps the pull visually light, which suits jobs where a slimmer handle profile coordinates with other decorative hardware.
The 3-3/4 inch center to center measurement on this SZPR8-ORB cabinet handle controls where to drill or route fixing points, which is useful when laying out a row of pulls across multiple doors or drawers. The 4-1/4 inch overall length shows how much space the pull occupies on the face, which helps position it on narrower rails or stiles without crowding adjacent edges. A projection of 1-7/16 inches sets how far the handle stands off the surface, making it suitable where users prefer enough finger room while still keeping the pull close to the cabinet front. The 1/2 inch width provides a slim footprint, which helps maintain clearance near neighboring hardware or trim details.
This Pro Value Series Premiere Series cabinet pull works on doors or drawers that accept a 3-3/4 inch center to center mounting pattern, which aligns it with many typical cabinet and furniture drilling layouts. The 4-1/4 inch overall length suits both base and wall cabinets, which helps keep a consistent look throughout a kitchen or shop-built installation using the same handle style. With a 1/2 inch width, the pull fits well on narrower drawer fronts or face frame rails, which is helpful when hardware must sit inside tighter stile or rail dimensions without overlapping neighboring details. The oil rubbed bronze finish visually coordinates with other oil rubbed bronze handles and pulls in decorative hardware and moldings, which supports cohesive hardware selections on a project that specifies this finish. The zinc die cast construction gives the pull a rigid feel, which supports everyday opening and closing motions on cabinets in residential or light commercial settings.
The 3-3/4 inch center to center spacing on the SZPR8-ORB cabinet handle creates a fixed drilling reference, which makes it easier to repeat accurate hole placement using jigs or templates across multiple fronts. The 1-7/16 inch projection from the surface keeps finger clearance consistent from door to door, which helps users experience the same grip feel across a bank of cabinets. A 4-1/4 inch overall length provides a predictable footprint, which simplifies aligning the pull relative to door edges, rails, or drawer centers when laying out a full run of hardware. The 1/2 inch width keeps the pull narrow, which is useful when aligning hardware close to panel profiles or glass inserts where extra space is limited. The combination of zinc die cast material and oil rubbed bronze finish maintains a uniform look and feel from piece to piece, which helps installers deliver a consistent appearance across an entire job.
The SZPR8-ORB cabinet handle has a 3-3/4 inch center to center dimension, which sets the drilling distance between mounting holes for layout and replacement work.
The Premiere Series pull has an overall length of 4-1/4 inches, which defines how much space it occupies on doors or drawer fronts during placement.
The SZPR8-ORB handle is zinc die cast, which provides a solid metal body suited to routine cabinet door and drawer operation.
This oil rubbed bronze cabinet pull has a 1-7/16 inch projection, which sets the stand-off from the cabinet face for finger clearance.
The Premiere Series cabinet pull has a 1/2 inch width, which keeps the handle profile slim on narrower rails and drawer fronts.
The SZPR8-ORB pull uses an oil rubbed bronze finish, which matches projects that specify oil rubbed bronze decorative handles and pulls.
The SZPR8-ORB Pro Value Series Premiere Series pull combines a 3-3/4 inch center to center layout, 4-1/4 inch overall length, and 1-7/16 inch projection in a zinc die cast body with an oil rubbed bronze finish. Those dimensions support consistent drilling, comfortable grip depth, and a slim 1/2 inch width on cabinet doors or drawers where an oil rubbed bronze handle is specified. For projects built around decorative handles and pulls in this finish, this cabinet pull offers a matched look and predictable sizing from piece to piece.
Sold In: 1 Each
