Pro Value Premiere Series pull is a cabinet handle from the Premiere Series that uses a 3 inch (76 mm) center to center drilling, so it lines up with standard 3 inch hole spacing on many cabinet doors and drawers. The pull is made from zinc die cast, giving a solid metal body that supports everyday opening and closing without feeling flimsy in the hand. Its weathered nickel finish provides a muted metal look that works well when a softer tone is preferred over bright chrome. The handle length of 4 inches gives enough grip area for fingers while still fitting well on narrower drawer fronts. A projection of 1 inch sets the handle off the door face enough for a comfortable grasp. The 1/2 inch width keeps the profile slim so it does not overpower smaller cabinet faces.
The Pro Value Premiere Series 3 inch (76 mm) center to center weathered nickel pull uses the SZPR7-WN pattern, giving a defined drilling and footprint for layout work. The 3 inch center to center spacing sets the hole locations along the door or drawer front, guiding drilling when new cabinets are laid out to that standard size. With an overall length of 4 inches, the pull extends slightly beyond the drilling centers at each end, which helps cover the area around the holes and provides a clear visual reference during alignment. The 1 inch projection identifies how far the pull stands off the face of the cabinet, so installers can anticipate hand clearance relative to surrounding trim. A width of 1/2 inch determines how much stile or drawer face space the pull will visually occupy. The pull uses an 8-32 x 1 inch screw size, so the threaded interface matches that common cabinet hardware thread standard.
The Pro Value Premiere Series 3 inch (76 mm) center to center weathered nickel pull works as a handle for cabinet doors and drawers where a 3 inch drilling pattern is used. With its 4 inch length, the handle offers enough room for a full hand grip on most standard fronts, which supports comfortable operation on frequently used doors. The 1 inch projection keeps the gripping surface away from the cabinet face, which can help when users approach the cabinet from the side and need finger clearance. Because the pull width is 1/2 inch, it sits neatly on narrow drawer fronts or slender door rails, which can help maintain balanced sightlines across a run of cabinetry that uses narrower framing members.
The 3 inch (76 mm) center to center drilling on the SZPR7-WN pull sets a clear, repeatable standard for handle placement across multiple doors and drawers, which supports consistent alignment when laid out on a project using the same spacing. The 4 inch overall length gives a modest overhang beyond the hole centers, which helps visually center the pull on the drilling and can mask slight layout variations near the ends. With a 1 inch projection, the pull presents a predictable stand-off from the cabinet front, which helps keep the feel similar across different cabinets when the same model is used throughout a room. The zinc die cast material provides a solid-feeling body that supports a consistent hand feel from one cabinet to the next, while the weathered nickel finish keeps the appearance uniform wherever the SZPR7-WN pattern is installed.
The Pro Value Premiere Series 3 inch (76 mm) center to center weathered nickel pull uses a 3 inch center to center measurement, guiding hole placement on cabinet doors and drawers.
The SZPR7-WN pull has a 4 inch overall length, giving extra grip area beyond the 3 inch drilling for comfortable use on doors and drawers.
The Premiere Series pull is made from zinc die cast, providing a metal construction that supports repeated cabinet use in everyday environments.
The Pro Value Premiere Series pull has a 1 inch projection, setting the handle off the cabinet face to allow finger clearance while opening doors and drawers.
The cabinet pull has a 1/2 inch width, giving a slim profile that suits narrower cabinet rails and drawer fronts.
The SZPR7-WN weathered nickel pull uses 8-32 x 1 inch screws, matching a common cabinet hardware thread and length standard.
The Pro Value Premiere Series 3 inch (76 mm) center to center weathered nickel pull brings a defined SZPR7-WN pattern, with 3 inch drilling, 4 inch length, 1 inch projection, and 1/2 inch width in zinc die cast. These dimensions and the weathered nickel finish support consistent layout, hand clearance, and visual balance when specifying or standardizing cabinet hardware across a project.
Sold In: 1 Each
