Hardware Concepts 4" Diameter Trash Grommet 2"H, - 6124-279

4 Inch Trash Grommet For Clean Counter Openings

4 inch trash grommet from Hardware Concepts, Inc. is a stainless steel trash grommet designed to finish a round opening while guiding waste into a bin below, helping keep countertop or cabinet surfaces tidy during everyday use. The product uses stainless steel material to form the body of the grommet, providing a hard metal edge that protects the cutout from wear as containers slide against it in normal operation. The stainless steel finish on this 4 inch diameter trash grommet also creates a defined, consistent opening that looks finished in kitchen or bath cabinetry where exposed plywood or core material would otherwise show. A liner height of 2 inches gives the opening a short collar, helping funnel trash straight down through the cutout so waste does not catch on the counter edge as it is pushed through.

Key Stainless Trash Grommet Details For Projects

• The 4 inch diameter size sets a clear target for the cutout, so cabinet and top fabricators can plan hole boring or routing around that specific opening dimension without guesswork on the grommet fit.
• Stainless steel material construction means the grommet presents a rigid, formed edge around the opening, supporting repeated daily use in kitchen and bath environments where containers and bags contact the rim.
• The chrome stainless steel finish matches the chrome option in the line, helping shops align the grommet appearance with other bright metal components on the same installation.
• A 2 inch height liner depth on this model creates a short drop into the waste area, guiding trash down from the surface while keeping the rim height low for comfortable sweeping from the worktop.
• Placement in the Replacement Bins and Accessories product class identifies this part as a component that can be used when existing trash grommets are swapped out or when a new opening is being outfitted.

Stainless Steel Trash Grommet Fit And Setup

The Hardware Concepts 4 inch diameter trash grommet uses its stated 4 inch opening size as the key reference for layout, so installers can plan boring equipment or templates around that measurement when preparing solid surface, laminate, or wood tops. The 2 inch high liner on this stainless steel trash grommet sets how far the sleeve drops below the surface, allowing fabricators to anticipate clearance above any waste container rim or cabinet framing under the cutout. Because the body is stainless steel with a chrome finish, the part provides a consistent edge thickness around the full circle, which supports tight routing tolerances when the opening is shaped to closely follow the grommet profile. Placement in kitchen and bath cabinet applications means the grommet can be aligned with typical counter or top thicknesses used in those environments.

Using This Trash Grommet In Cabinet Projects

Where This 4 Inch Trash Grommet Fits Best

The Hardware Concepts 4 inch diameter trash grommet is specified for kitchen and bath cabinet work, so it serves in tops or shelves where a round opening directs waste into a bin below. The stainless steel construction paired with a chrome finish suits projects where metal trim details are already present, such as sink hardware or decorative pulls, allowing the trash opening to visually coordinate with surrounding components. Its role within the Trash Bins and Grommets category positions it as part of a waste management layout, guiding where a bin is placed under the opening in built-in cabinetry. A 2 inch high stainless liner on this trash grommet also means the collar extends slightly into the cabinet space, forming a short chute that helps keep trash falling straight into the intended container during normal use.

Why The Stainless Design Supports Repeatable Results

The stainless steel material and finish on this trash grommet give fabricators a stable, non-deforming ring to work with, so once the 4 inch cutout is machined, the metal edge holds its shape under daily contact. The chrome stainless finish provides a consistent surface around the full perimeter, which helps the opening read as a clean, intentional detail on finished tops. The specified 2 inch liner height creates a predictable drop length below the surface, letting cabinet designers map clearances above doors, shelves, or dividers under the opening. As part of the Replacement Bins and Accessories class, the 6124-279 model can be matched by part number when a shop wants to repeat an existing detail across multiple jobs or service a prior installation using the same geometry.

Common Questions About Hardware Concepts 6124-279

Select This 4 Inch Grommet For Defined Waste Openings

The Hardware Concepts, Inc. 4 inch diameter stainless steel trash grommet with a 2 inch high liner and chrome finish gives cabinet and countertop projects a defined, repeatable opening for directing waste into a bin. By working from the stated 4 inch size and liner depth, shops can plan cutouts and interior clearances around this specific part number. For kitchen and bath cabinet builds or replacements that call for a stainless steel trash opening detail, this 6124-279 model from Wurth Baer Supply provides a clearly specified component ready to integrate into your next layout.