3 inch trash grommet from Hardware Concepts, Inc. is a stainless steel trash opening trim designed to finish and protect a cutout where waste drops through a surface. The stated 3 inch diameter defines the opening size it is built to trim, so the part fits projects planned around that dimension. The 2 inch height gives enough depth to form a clean, defined edge around the cutout, which helps guide waste straight down instead of catching on a raw hole. The stainless steel material and finish provide a hard surface around the opening, so the rim resists everyday scuffing from containers or bags being passed through. This grommet is part of Hardware Concepts kitchen and bath cabinet trash bins and grommets, so it is aimed at cabinet and counter layouts where a permanent trash drop is required. The 6123-279 designation ties this exact size and height to future reorders.
The 3 inch diameter of this Hardware Concepts trash grommet sets the target size for the cutout in the work surface, so installers can bore or cut to that measure and drop the grommet into place. The 2 inch height provides a short sidewall through the surface, giving the opening a finished sleeve instead of an exposed substrate edge. Stainless steel construction means the rim and sidewall form a rigid collar, so the opening keeps its shape once the grommet is positioned. With polished and brushed stainless options, the visible top edge can be chosen to line up with hinge, pull, or appliance finishes already specified on the job.
This Hardware Concepts 3 inch diameter trash grommet fits projects that call for a defined waste drop point in kitchen or bath cabinet installations. The part belongs to the trash bins and grommets category within kitchen and bath cabinet accessories, so it is aimed at tops or panels that need a trimmed opening above a bin. The 2 inch height helps it sit within typical panel or countertop thickness ranges while still presenting a distinct sleeve around the cutout, which keeps the transition between surface and opening controlled. Because it is stainless steel, the grommet aligns with cabinet environments that already specify stainless details, tying the trash opening into the broader hardware scheme. Across multiple stations, repeating the same 3 inch opening with this part keeps waste ports consistent from one cabinet section to the next.
The high quality stainless steel material and finish give this 3 inch trash grommet a smooth, hard contact surface at the waste opening, which helps resist marking as containers, cups, or bags hit the rim during daily use. The defined 3 inch diameter keeps the opening predictable, so template work and repetitive cutouts stay accurate across several panels or tops. With a 2 inch height, the grommet forms a short sleeve that shields the edge of the cutout, which supports cleaner edges over time where moisture or impact might otherwise wear the substrate. Polished and brushed stainless options allow the visible rim to either stand out with a brighter look or sit back with a softer sheen, helping installers tie the trash opening into selected pulls, faucets, or trim. Being a specific 6123-279 part number within a family that spans six diameters and multiple liner depths, this piece can be specified knowing matching sizes and depths exist for other openings on the same job.
This Hardware Concepts trash grommet has a 3 inch diameter and a 2 inch height, so it trims an opening sized for that diameter while providing a short sleeve through the surface.
The 6123-279 trash grommet is made from high quality stainless steel, giving the opening a hard, smooth rim suitable for frequent contact in cabinet environments.
This 3 inch trash grommet is available in polished and brushed stainless finishes, so the visible rim can match or complement surrounding cabinet hardware.
The 2 inch height creates a short sleeve through the surface, protecting the cutout edge and giving the opening a defined collar once the grommet is set in place.
This 6123-279 model is part of a Hardware Concepts series that offers six diameter sizes and liner depths from 1 inch to 6 inch for coordinated trash openings.
This trash grommet is categorized as a kitchen and bath cabinet trash bin and grommet component, so it is used at waste drop openings in cabinet or counter layouts.
The Hardware Concepts 3 inch diameter, 2 inch high stainless steel trash grommet gives a defined collar around a waste opening in kitchen and bath cabinet work. With polished and brushed finish options and a specific 6123-279 part number, it fits projects that call for consistent, repeatable trash ports across multiple stations. For layouts built around a 3 inch opening and stainless hardware, this grommet provides a matching trim point ready to integrate into the overall hardware plan.
Sold In: 1 Each
