10 inch trash grommet describes the Hardware Concepts 10 inch diameter trash grommet that lines a cutout so waste drops cleanly through the opening. The stated 10 inch diameter defines the opening size it is designed to trim, which matters when matching to existing or planned countertop cutouts in a kitchen or bath cabinet installation. The 2 inch height noted in the product name establishes the vertical depth of the liner, which helps guide waste into the bin while keeping the counter edge covered for a neat transition. The SAP description identifies this part as stainless steel, so the liner uses stainless steel material in normal use, supporting a hard surface at the cut edge that resists everyday contact with bags and containers. The manufacturer part number 6150-279 ties directly to this exact combination of 10 inch diameter and 2 inch height.
The Hardware Concepts 10 inch diameter trash grommet is built as a round liner for a matching sized cutout, so fabricating or using an opening that corresponds to its 10 inch diameter supports a snug trim around the waste drop point. The 2 inch height creates a short sleeve below the surface, giving a defined edge for waste to pass through while allowing space for a collection bin to sit below in typical cabinet layouts. Because this part is specified in stainless steel, the contact area around the opening remains metal, which stands up to routine contact from bags and containers as they move across the edge. Its role in the Kitchen & Bath Cabinet Accessories category positions it for use in cabinet-based trash stations where a fixed opening is needed in a work surface.
This 10 inch diameter stainless steel trash grommet from Hardware Concepts, Inc. is listed under Kitchen & Bath Cabinet Accessories, so it is intended for cabinet and counter layouts that route waste through a dedicated opening. The circular liner shape surrounds the cut edge so trash can be swept directly through the 10 inch opening without contacting raw substrate, which is useful wherever a durable edge is required. With a 2 inch height in a line that offers 1 inch to 6 inch depths, this version fits situations where a moderate sleeve is preferred over extremely shallow or very deep liners. Being part of the Trash Bins & Grommets category identifies it as one element of a trash management setup that centers around a fixed counter opening and a receptacle positioned below.
The 10 inch diameter dimension defines how the opening aligns with bins placed beneath, because a known circular size makes it straightforward to pair with waste containers sized for that drop zone. The 2 inch height contributes a short vertical chute, guiding waste through the counter while limiting how far the liner extends into the cabinet space, which matters when positioning a bin or related components under the opening. Stainless steel material and finish create a smooth, rigid edge that stands up to contact from trash bags sliding against the rim, helping maintain a consistent opening profile over repeated use. Being offered within a family that ranges from shallow 1 inch to deep 6 inch liner depths also means this specific 2 inch version can be chosen for layouts that need a defined but not overly tall guide at the drop point.
The Hardware Concepts 6150-279 trash grommet is identified as a 10 inch diameter part with a 2 inch height, so it suits round openings sized to that diameter and needs 2 inches of vertical space.
The SAP description notes this part as stainless steel, so the grommet uses stainless steel material and finish around the opening for a hard, smooth contact surface.
The specified 2 inch height creates a moderate vertical liner that helps guide trash through the opening while still leaving cabinet space below for a bin.
The web description states that the stainless steel trash grommet line is available in polished and brushed finishes, supporting visual coordination with nearby metal components.
The product is categorized under Kitchen & Bath Cabinet Accessories and Trash Bins & Grommets, placing it in cabinet-based trash openings in those areas.
The web description notes liner depths from 1 inch to 6 inches, and this 2 inch model sits near the shallow end, offering a defined but compact guide.
The Hardware Concepts 10 inch diameter, 2 inch height stainless steel trash grommet 6150-279 provides a metal-lined opening sized for waste drop points in kitchen and bath cabinet work. Its place in the Replacement Bins and Accessories class marks it as a component for setting or renewing a fixed trash opening. The combination of 10 inch round diameter, 2 inch height, and stainless steel material gives a predictable opening and edge profile for projects that call for a durable, trimmed waste drop in a countertop or similar surface.
Sold In: 1 Each
