6320 2" 1-Piece Wire Grommet Liner, White

6320 2" White Wire Grommet Liner For Clean Pass-Throughs

6320 2" 1-piece wire grommet liner white is a Hardware Concepts, Inc. component designed to finish a 1-3/4 inch bore hole so cable pass-throughs look planned instead of rough-cut. The specified bore hole size of 1-3/4 inch means the hole saw or bit size is clearly defined, which helps repeat the same opening across work surfaces without guesswork. The liner depth of 3/4 inch lets the piece seat into common panel thicknesses while covering the raw edge so cables do not rub directly on the substrate. The overlapping trim edge with smooth finish covers slight chipping at the hole edge and presents a neat ring on the finished face, supporting a more professional look on visible desk, cabinet, or panel surfaces. The white finish matches light-colored layouts, so the opening blends into office, closet, or workspace components instead of drawing attention.

Practical Details Of This Wire Grommet Liner

• The bore hole size of 1-3/4 inch defines the required cutout, which simplifies layout when multiple tops or panels need identical wire openings with the same Hardware Concepts, Inc. liner.
• The 3/4 inch liner depth lets the grommet sit into the material, so the liner surrounds the bore edge and gives cables a consistent surface to pass against instead of exposed board.
• The overlapping trim edge with smooth finish spans slightly irregular hole edges, so minor tear-out around the bore is covered while the visible face appears uniform and finished.
• The hole liner can be purchased separately from the matching cap, which allows projects that already use a cap or do not need a closure to still finish the bore edge cleanly.
• The option to purchase the hole liner and cap together supports builds that need both a finished opening and an integrated wire hole management point at the same location.

Wire Grommet Liner Fit And Bore Preparation

The stated 1-3/4 inch bore hole size ties directly to the fit of this grommet liner, so using that dimension during drilling produces an opening that accepts the liner without excessive play. Because the liner depth is 3/4 inch, the component occupies a defined section of the panel thickness, which helps the installer understand how far the liner will sit inside the material once pressed into the bore. The overlapping trim edge provides a clear visual reference ring, so the finished opening centers around the drilled hole and masks minor breakout at the perimeter. The smooth finish on the trim edge also means the contact point around the hole is even, which supports a consistent line where the surface material meets the grommet.

Using This Hardware Concepts Wire Grommet Liner On Projects

Where This Wire Hole Liner Works Best

This grommet liner is part of the grommets class within shelf, closet, and garage organization as well as multimedia and workspace components, so it suits projects that route cables through panels in those environments. The 1-3/4 inch bore size aligns with common openings used for power and low-voltage wiring, which helps standardize cutouts across desks, cabinets, and worktops. The white color coordinates with many light work surfaces in offices or closets, so the opening blends into the background where a neutral appearance is preferred. Because the liner depth is 3/4 inch, the piece engages the bore over a measurable distance, which helps the ring sit straight in the hole once pressed into place. The overlapping trim edge defines the visible boundary around the opening, so the finished result appears as a deliberate cable port rather than a raw drilled hole.

Details That Support Clean, Repeatable Cutouts

The clearly stated 1-3/4 inch bore hole size gives installers a direct link between the grommet specification and the cutting tool, which supports accurate hole placement when multiples are laid out along a countertop or cabinet run. The 3/4 inch liner depth creates a stable side wall inside the hole, so cables pass against a consistent surface rather than varying substrate edges. The overlapping trim edge with smooth finish acts like a built-in escutcheon, so slight variations in hole roundness or top-face chipping are hidden behind the uniform ring. Because the hole liner and cap can be purchased together, the same cutout can handle both the liner and a cap with permanent wire hole, which helps maintain one bore dimension for different cable routing needs. When only the liner is needed, the ability to purchase it separately means openings can still receive the same finished edge treatment while following the same 1-3/4 inch drilling standard.

Common Questions About The 1-3/4 Inch Wire Grommet Liner

Selecting This White Wire Grommet Liner For Your Job

This Hardware Concepts, Inc. 6320-010 wire grommet liner ties a 1-3/4 inch bore hole size to a 3/4 inch liner depth and an overlapping trim edge with smooth finish, giving you a defined drilling target and a neat white ring wherever cables pass through panels.