2-Piece Wire Grommet White For Clean Cable Runs

2-piece wire grommet white describes a cap and liner set that finishes a round wire pass-through so cables look organized and protected. The bore hole size is 1-3/4 inch, so the installer cuts a predictable hole diameter that matches common boring tools. The liner depth is 3/4 inch, so the grommet seats securely in thicker top materials without feeling loose during everyday use. The overlapping trim edge has a smooth finish, so the cut edge of the work surface is concealed while cables slide through without catching. The cap has a built-in permanent wire hole, so the opening stays consistent and does not shift when cables are moved. The hole liner and cap can be purchased together, so the installer gets a matched fit between parts for a neat appearance. Hardware Concepts, Inc. identifies the product under manufacturer part 6325-010, so it is easy to reference in project documentation.

Wire Grommet Details That Support Clean Work

• The bore hole size is 1-3/4 inch, so drilling that hole diameter produces a snug fit between the work surface and the liner for a stable installation.
• The liner depth is 3/4 inch, so the grommet engages more material thickness, which helps resist wobble when cables pull against the edge of the hole.
• The overlapping trim edge has a smooth finish, so it hides minor chipping at the drilled hole while presenting a clean surface around the cable opening.
• The cap has a built-in permanent wire hole, so cables pass through a fixed opening that helps maintain alignment and reduces movement at the desk or cabinet top.
• The hole liner and cap can be purchased together, so the parts match in size and finish, which supports a uniform look across multiple cutouts in the same project.

Installation Fit Around 1-3/4 Inch Bored Holes

The bore hole size is 1-3/4 inch, so layout and boring are straightforward on worktops, shelves, or multimedia furniture using standard bits for that diameter. The liner depth is 3/4 inch, so once pressed into the hole, the sidewall of the liner has enough engagement to feel solid in typical top thicknesses used in shop-built cabinetry and workstations. The overlapping trim edge covers the perimeter of the bored hole, so small deviations from a perfect cut are hidden after the grommet is pressed into place. The cap has a built-in permanent wire hole, so once the cap is seated, the cable route remains consistent, which helps keep cords grouped where the designer intended.

Using This Hardware Concepts Wire Grommet On Projects

Where This 1-3/4 Inch Wire Grommet Fits Best

The product is a 2-piece wire grommet cap and liner in white from Hardware Concepts, Inc., so it suits projects that call for a light, neutral finish on desktops, counters, or cabinets. The bore hole size is 1-3/4 inch, so it works in surfaces where that sized opening can be drilled cleanly, such as wood or composite tops used for multimedia and workspace components. The liner depth is 3/4 inch, so the grommet performs well in thicker tops where more sidewall contact supports long-term stability. The overlapping trim edge with smooth finish visually cleans up the cable exit point, so the installation presents well in offices, shop workstations, and closet or garage organization layouts that route power or data lines.

Why The 2-Piece Cap And Liner Design Matters

The product is described as a 2-piece wire grommet cap and liner, so the liner establishes the fitted interface with the 1-3/4 inch bored hole while the cap handles day-to-day cable contact. The cap has a built-in permanent wire hole, so the cable opening does not rotate separately from the liner, which keeps the look consistent across multiple grommets in a run. The overlapping trim edge works together with the liner depth of 3/4 inch, so minor chip-out or roughness at the drilled edge is covered while the sidewall contact keeps the assembly firm under repeated cable adjustments. The white finish on the overlapping trim edge and cap presents a uniform appearance, so it integrates with light-colored furniture or casework and helps the wire pass-through read as a deliberate design detail rather than a raw hole.

Common Questions About The 6325-010 Wire Grommet

Select This Wire Grommet For Clean Cable Openings

The 6325 2-piece wire grommet cap and liner in white delivers a bore hole size of 1-3/4 inch and a liner depth of 3/4 inch, so it suits standard bored openings that need a finished cable exit. The overlapping trim edge with smooth finish and the cap with built-in permanent wire hole turn a drilled hole into a defined wire passage that looks intentional on desktops, cabinets, and workspace components. The clear identification as Hardware Concepts, Inc. part 6325-010 supports repeat ordering on multi-station or multi-room projects where matching details matter.