Rectangular Wire Grommets Two Piece Plastic - Hardware Concepts, Inc. 6391-010

2PC Wire Grommet White For Clean Wire Runs

2PC 1-3/4 X 3-3/4 wire grommet white describes a rectangular plastic grommet sized for a 1-3/4 inch by 3-3/4 inch wire opening, so it manages a medium rectangular cutout where several cords pass through a surface. The two piece plastic construction, described as cap and liner, creates a finished edge around the cutout and a mating cap on top, so the opening looks clean and shields the wire path from the raw substrate. The rectangular wire grommets two piece plastic design from Hardware Concepts, Inc. aligns with multimedia and workspace components, so it suits desks, countertops, or similar panels where organized cable routing matters. The white color called out in the description supports projects that use light finishes, so the grommet blends visually into white or light-colored work surfaces in office, closet, or garage layouts.

Key Details Of This Rectangular Wire Grommet

• The cap has two independent hinged tabs for wire openings, so you can swing each tab as needed to route one or multiple cords while keeping unused areas mostly closed for a neater appearance.
• The two independent hinged tabs allow separate wire paths, so data and power lines can exit through different sides of the cap opening to reduce crossing and tangling around the grommet.
• The designation 2PC in the description indicates a cap and liner sold together, so the mounting liner surrounds the cutout while the cap finishes the top, giving both structural support and a clean finished look.
• The rectangular 1-3/4 inch by 3-3/4 inch size focuses the opening area, so the cutout is large enough for several cords or plugs yet compact enough to sit comfortably on worktops or closet shelves without taking excessive space.
• The white plastic material referenced in the SAP description works with light-colored installations, so this grommet visually ties into white casework, shelving, or garage systems instead of standing out as a dark trim piece.

Wire Grommet Fit And Two Piece Installation Role

The description 2PC 1-3/4 X 3-3/4 wire grommet white signals that this part is intended to sit in a 1-3/4 inch by 3-3/4 inch opening, so fabricating that size cutout lets the liner seat into the panel and the cap register over it. The two piece plastic format, described as cap and liner, means the liner drops into the opening while the cap rests above, so the pair work together to cover raw cut edges and create a defined cable exit point. The rectangular wire grommets two piece plastic identity places this in the grommets product class, so it functions as a pass-through rather than a clamp, keeping the workflow focused on routing cords through furniture or organization panels. Because the cap and liner are sold together, both mating components are matched for that opening size, easing layout planning for panels in multimedia and workspace applications.

Using The Hardware Concepts 6391-010 Wire Grommet

Where This Rectangular Plastic Wire Grommet Fits Best

The category listing under Shelf, Closet & Garage Organization and Multimedia and Workspace Components shows that this rectangular plastic wire grommet is aimed at storage and work environments that need organized cabling. The 1-3/4 inch by 3-3/4 inch dimension gives a proportion suited to cabinet tops, desks, or media shelves where multiple low-voltage or power cables need a clean exit route. The white color highlighted in the SAP description ties into standard white closet systems and office furniture, so installers can specify it when they want pass-throughs that match painted or laminated white panels. Being part of the grommets product class keeps its role focused on guiding wires through surfaces, so it works as a finishing detail wherever panels carry electronics, lighting, or tool cords along shelves and workstations.

How Two Piece Design And Hinged Tabs Help Workflow

The two piece plastic construction, described as cap and liner sold together, supports a straightforward installation sequence where the liner is set into the 1-3/4 inch by 3-3/4 inch opening and the cap drops over it, so the installer gains a consistent finished edge without fabricating a separate trim. The cap has two independent hinged tabs for wire openings, which means the installer can swing open only the sections needed for current wiring while leaving the rest closed, helping control visual clutter around the pass-through. Those independent hinged tabs create distinct exit paths for cables, so power leads, data cables, or audio lines can break out in separate lanes at the grommet instead of bunching into a single slot. Because the Hardware Concepts, Inc. part number 6391-010 clearly identifies this specific configuration, repeat projects can reference the same grommet for consistent cutout sizing and appearance across multiple stations or storage runs.

Common Questions About The 6391-010 Wire Grommet

Choose This Grommet For Clean Cable Routing

The 2PC 1-3/4 X 3-3/4 wire grommet white from Hardware Concepts, Inc. pairs a cap and liner to finish a rectangular opening where wires pass through a surface, so it suits worktops, shelves, and storage runs with visible cabling. The cap has two independent hinged tabs for wire openings, giving flexible cable exit options that help keep desktops, media centers, and organized storage areas visually tidy. For projects running power or low-voltage wiring through white or light-colored panels, this rectangular wire grommets two piece plastic design offers a defined, repeatable solution ready to match that 1-3/4 inch by 3-3/4 inch opening.