Rectangular Wire Grommets Two Piece Plastic Use

Rectangular wire grommets two piece plastic from Hardware Concepts, Inc. provide a shaped pass-through that organizes wires in multimedia and workspace setups, so cable runs pass through a clean opening instead of a rough cutout. The 2PC 1-3/4" x 3-3/4" wire grommet ALM sizing defines the opening footprint, which helps installers plan precise cutouts in shelves, closets, or desks. The cap and liner are sold together as a matched set, so the visible trim and the liner work as one unit around the wire path. This rectangular form fits runs where a slot-style opening makes more sense than a round hole, helping group several cords in a straight line. Belonging to the grommets class within shelf, closet and garage organization, this part integrates easily into storage layouts that route power and data to equipment while keeping edges finished.

Key Wire Grommet Details For Daily Work

• The cap has two independent hinged tabs for wire openings, allowing cables to pass through while each tab swings separately, so installers can expose just enough opening for the actual bundle and keep unused space covered.
• This hinged-tab design lets wires be added or repositioned without removing the entire grommet, which supports adjustments during equipment changes while keeping the opening visually tidy.
• The rectangular 1-3/4" x 3-3/4" format works with elongated cutouts, so installers can align multiple conductors side by side instead of stacking them in a tight round hole.
• Being a two piece plastic construction with a cap and liner lets the liner sit in the cutout while the cap finishes the surface, which helps maintain a neat edge on both the work surface and wire exit.
• Classification under multimedia and workspace components signals that this grommet suits cable routing for desks, counters, or stations where appearance and cable organization support daily access and service.

Rectangular Wire Grommet Fit And Cutout Planning

The 2PC 1-3/4" x 3-3/4" wire grommet ALM description gives installers a clear reference for planning the opening, so layout lines and tool setups can be sized to match the intended grommet footprint. As a two piece plastic design, the liner part occupies the cut edge while the cap seats over it, so the cutout can be made to working size and then visually finished by the cap during final assembly. Because this part is identified as a rectangular wire grommet rather than round, it aligns with openings along cabinet backs, desk tops, or closet panels where cables often follow straight paths, which can simplify routing compared to angled runs. The grommet sits within the broader shelf, closet and garage organization category, so it fits into storage or work zones that already route cords to charging areas or powered tools.

Using Hardware Concepts 6391-029 In Projects

Where This Rectangular Wire Grommet Fits Best

The Hardware Concepts rectangular wire grommet identified by manufacturer part 6391-029 is part of multimedia and workspace components, so it is suited to installations where power, data, or low-voltage lines pass through furniture or built-ins that support equipment. Its placement in shelf, closet and garage organization means it can be used in storage systems that carry cables to devices on shelves or within closet organizers, giving those locations a more finished route for cords. The 1-3/4" x 3-3/4" rectangular form works naturally along the edges of desks, countertops, or work surfaces where cables tend to follow straight channels, helping align the opening with real cable paths. As a grommet product class piece, it plays the role of finishing and protecting the cutout edge around wires, bringing a defined transition between hidden chases and visible work areas.

Why Two Piece Hinged Tabs Support Clean Results

This two piece plastic wire grommet uses a cap and liner sold together, so the liner stabilizes inside the panel while the cap provides the visible trim, which helps the opening stay square and clean after the cut. The cap has two independent hinged tabs for wire openings, allowing each tab to swing on its own to match the size and shape of the wire bundle passing through. That independent motion lets installers open just one side for a smaller group of cables or both for a wider path, which keeps unused portions of the opening covered and visually controlled. In practice, this hinged-tab approach supports later cable changes because lines can be added or rerouted through the tabs instead of pulling the cap away from the liner, reducing disturbance to the finished surface. The two piece construction reinforces the separation between the structural cutout and the visible edge, which can help maintain a consistent look when panels or tops vary slightly in thickness.

Common Questions About The 6391-029 Wire Grommet

Selecting This Grommet For Wire Routing Tasks

The Hardware Concepts rectangular wire grommet two piece plastic 6391-029 pairs a 1-3/4" x 3-3/4" footprint with hinged wire tabs, giving installers a defined cable path sized for elongated openings. As a cap and liner sold together in the grommets class, it provides both structure inside the cutout and a finished face for multimedia and workspace components. Its place within shelf, closet and garage organization supports projects that bring power and signal lines through storage or work panels, so selecting this part helps align wire routing with a clean, rectangular finish.