Plywood Hardwood Paint Maple, White, Veneer Core, Domestic, ULEF, Whole Piece Face, 1-Sided Satin Gloss 1/2" Thickness, 48.5 x 96.5, Grade C-3

Plywood Hardwood Paint Maple For Casework

Plywood Hardwood Paint Maple gives you a domestic maple-faced plywood panel designed for painted projects where a smooth, consistent base matters. The 1/2 inch thickness keeps the panel substantial for cabinet sides, partitions, and built-ins while managing overall project weight on larger runs. The white maple face provides a light, uniform appearance that supports paint-ready preparation when sanding and priming. A veneer core construction holds thickness more evenly across the 48.5 x 96.5 inch sheet, which supports layout planning when ripping cabinet components to size. The C-3 grade designation on the face signals a serviceable paint-grade surface, so it fits well in utility cabinetry, shop fixtures, and other non-clear-finish work. The 1-sided satin gloss face focuses the finished side to one face of the sheet, which helps orient parts during cut planning and assembly. ULEF labeling identifies an ultra-low emitting formaldehyde adhesive system in the panel, which matters for shop air quality management when processing multiple sheets.

Key Maple Plywood Details For Shop Planning

• The 48.5 x 96.5 inch panel size gives slightly over 4 x 8 feet, which helps when squaring sheets and allows trimming edges while still yielding standard cabinet parts.
• The 1/2 inch thickness balances strength with reduced mass, which helps during handling on the saw and supports mid-span cabinet components without the weight of thicker material.
• The white maple face veneer creates a light tone surface, which makes layout lines more visible and supports uniform paint coverage over the panel.
• The veneer core build uses layers of veneer inside, which helps the sheet hold fasteners in the core and provides predictable machining for dados and grooves.
• The C-3 face grade is oriented to paint-grade or utility work, which lets you direct higher-grade materials to visible clear-finish areas and use this panel where painted or secondary surfaces are planned.
• The 1-sided satin gloss face concentrates the refined surface on one side, which helps with part orientation so finished faces align consistently inside a run of cabinets.

Installation And Layout Characteristics Of This Panel

The 1/2 inch States Industries plywood thickness works well where you need full-size cabinet or fixture panels that still machine cleanly with common shop tooling. The 48.5 x 96.5 inch format gives extra material at the edges, which supports trimming factory edges before final ripping while still pulling full-height cabinet sides. The veneer core interior supports routing for dados and rabbets without abrupt void transitions, which helps with fitting backs or dividers into routed housings. With the satin gloss finish on one face only, orientation during cutting and assembly becomes straightforward, so finished faces line up in a consistent direction throughout a job. The white maple face layer provides a uniform working surface for sanding, priming, and painting, helping produce even coverage across wide cabinet sides, tops, and doors.

Using This Maple Plywood In Real Projects

Where This C-3 Maple Panel Fits Best

This States Industries plywood sheet, listed as WHITE MAPLE,C/3,1/2X4X8,PF1S,VC, is positioned for interior woodworking where a white maple face and paint-grade quality are appropriate. The C-3 face grade ties this panel to painted casework, shop fixtures, and utility cabinets where appearance should be consistent but does not demand a clear-finish grade. The 48.5 x 96.5 inch size allows tall cabinet sides, end panels, or closet components to be cut from a single sheet, supporting layouts that minimize horizontal seams. Veneer core construction works well for carcass parts and dividers that rely on stable thickness for joinery, especially in projects using dados or rabbets cut with matched tooling. The 1-sided satin gloss surface supports orienting the more refined face outward on visible panels, while the backing face can serve interior or concealed surfaces where finish demands are lower.

Why The Verified Specs Support Repeatable Results

The combination of 1/2 inch thickness and veneer core gives a known panel build that behaves predictably across multiple sheets in a run, helping maintain consistent settings for saw fences and router depths. The white maple face veneer creates a bright work surface that makes pencil layout marks easier to see during cutting and drilling, which supports accurate part identification and orientation. With a single satin gloss face, each cut part inherently has a designated primary side, which simplifies assembly flow when orienting doors, drawer fronts, and cabinet ends. The domestic origin of this maple-faced plywood, identified in the description as domestic, supports consistent grading and sizing, which matters when coordinating replacement pieces or tying into existing runs of similar material. ULEF adhesive classification means the panel uses an ultra-low emitting formaldehyde resin system, which supports indoor woodshop applications where multiple panels are processed and helps with handling in enclosed project spaces. The C-3 face grade and veneer core combination provides a panel aimed at solid structural performance with a paint-grade maple appearance, which ties directly to repeatable results in painted cabinetry and built-ins.

Common Questions About This Maple Plywood Sheet

Select This Maple Panel For Paint Grade Work

This States Industries Plywood Hardwood Paint Maple panel brings together a white maple face, C-3 paint-grade classification, and 1/2 inch veneer core construction for interior projects. The 48.5 x 96.5 inch sheet size suits full cabinet sides and tall partitions while leaving trim allowance on each edge. With a single satin gloss face and ULEF adhesive system, it fits well where a defined primary face and ultra-low emitting resin are priorities. Choose this sheet when planning maple-faced, paint-grade casework that depends on consistent panel build and predictable machining from one project to the next.