Plywood Hardwood Veneer Core, Domestic Maple, White, Whole Piece Face, 1-Sided Satin Gloss 11/16" Thickness, 48.5 x 96.5, Grade C-3

Plywood Hardwood Veneer Core For Cabinetry Work

Plywood Hardwood Veneer Core from States Industries is a domestic maple plywood panel that uses a veneer core to provide a stable wood-based sheet for cabinet and woodworking projects. The white maple face presents a clean, light-colored surface that supports bright, contemporary finishes in shops focused on consistent appearance. The panel is produced as a whole piece face, so the visible maple side is laid up from a single full sheet, helping maintain a uniform grain field across doors, ends, and tall panels. Thickness is specified at 11/16 inch, giving a substantial panel that works well where added stiffness is useful. The sheet size of 48.5 by 96.5 inches provides extra trim room around a nominal 4 by 8 layout, which helps when sizing parts to final dimensions. Grade C-3 identifies a shop-grade face and back combination suited to interior cabinetry and similar applications.

Maple Veneer Panel Details That Support Workflow

• The domestic maple face uses white maple, which creates a neutral, light-toned surface that accepts a range of interior design schemes in cabinet shops and millwork settings.
• The veneer core construction creates a plywood structure built from wood veneers, supporting stable machining performance for cutting, routing, and edge treatment on standard shop equipment.
• The whole piece face configuration uses one full maple sheet for the show side, minimizing face joints so grain flows more continuously across visible parts such as doors, drawer fronts, and panels.
• The 1-sided satin gloss designation applies to the finished maple face, providing a smoother, higher-sheen presentation on the working side that is intended to be oriented outward in finished work.
• The C-3 grade note defines the face and back quality level, helping shops match this panel to interior projects where a serviceable show face and utility back are appropriate.

Panel Size And Thickness For Cutting And Layout

This States Industries plywood panel is specified at 11/16 inch thickness, giving a substantial sheet that suits casework and panel runs where a thicker section is needed for construction or edge profiles. The panel measures 48.5 by 96.5 inches, so it provides slightly more than nominal 4 by 8 coverage, giving extra material at the edges during layout and cutting. That additional margin supports cleaner optimization of parts when breaking down sheets for cabinet sides, tops, and interior partitions. The veneer core build works with the stated thickness and size to offer a predictable sheet format for repeat cutting patterns in production or project-based shops.

Using This Domestic Maple Veneer Core In Projects

Where This White Maple Panel Is Typically Applied

This product is a plywood hardwood veneer core panel in white domestic maple, positioned within the plywood hardwoods category for woodworking applications. The C-3 grade rating and maple face make it suitable for interior cabinet and millwork projects where a sound show face is important on one side and a utility back suffices on the reverse. The 1-sided satin gloss description indicates that the primary maple face is intended as the outward-facing surface in use, which aligns with cabinet exteriors, exposed ends, or wall panels needing a finished presentation on one side. The 48.5 by 96.5 inch format lets shops run full-height parts and wide panels from a single sheet when designing interior storage or display units.

Details That Help With Consistent Results And Layout

The veneer core construction in this States Industries panel provides a plywood structure built from wood veneers, supporting predictable behavior under saws and routers. That structure, combined with the 11/16 inch thickness, helps parts retain their shape during handling, joinery cutting, and assembly in cabinet cases or built-ins. The whole piece face detail means the visible maple side is formed from a single face sheet, so grain and color run more consistently across wide doors or side panels, which helps when aligning adjacent components on an installation. The C-3 grade classification gives shops a clear expectation of face and back quality levels, making it easier to assign the satin gloss face to outward surfaces and the back to concealed areas. Because the panel sits in the plywood hardwoods, domestic and import class and is identified by manufacturer part number 5095/701875, it fits into organized material libraries for repeat specification on similar projects.

Common Questions About This Maple Veneer Core Panel

Selecting This States Industries Maple Plywood Panel

This States Industries plywood hardwood veneer core panel combines a white domestic maple whole piece face, C-3 grade, and 1-sided satin gloss finish in a 48.5 by 96.5 inch sheet at 11/16 inch thickness. Those characteristics define a work-ready maple-faced sheet for interior cabinet and woodworking projects where a single good face, veneer core construction, and slightly oversize 4 by 8 format support layout and machining needs. For projects that match this grade, thickness, and size, this panel offers a defined, repeatable option.