
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
EPCO DP Series recessed pull is a stainless steel pull designed to sit flush with the face of a drawer or door, which keeps the front surface clear for tight spaces or clean-lined cabinet runs. The 115mm (4-1/2 inch) overall length and 42mm (1-5/8 inch) width define a compact pull area that fits many small to mid-size cabinet fronts where a low-profile grip is preferred. Stainless steel material combined with a stainless steel finish provides a uniform look that suits stainless-front cabinets or projects that call for metal hardware. The DP4115-SS manufacturer part number ties this pull to the EPCO DP Series line for consistent specification across similar openings. With a 14mm (9/16 inch) projection or depth, the pull sits shallow in the cutout, which helps maintain interior clearance behind the door or drawer.
The 93mm (3-11/16 inch) by 34mm (1-5/16 inch) mounting hole size defines the opening needed so the DP4115-SS pull seats correctly in the recess without excess play. With the pull mounting flush to the face of the drawer or door, the front surface stays flat around the hardware, which suits applications where projecting pulls could interfere with sliding panels or passing traffic. The 14mm (9/16 inch) projection or depth shows how much material is occupied inside the routed pocket, helping align the recess depth to standard panel thicknesses. Side screw, pin mounted, or glued attachment options support different shop workflows, whether the preference is mechanical fastening from the side or bonding the pull into the prepped cutout.
The EPCO DP Series 115mm (4-1/2 inch) recessed pull works where a compact stainless steel grip is needed in a machined pocket on a drawer or door front. The stainless steel material with stainless steel finish suits cabinet, casework, or fixture fronts that already use stainless details, providing visual continuity across a run. Because the pulls mount flush with the face of the drawer or door, they are suited to layouts where doors pass close to each other or where fronts need to stay low profile. The 42mm (1-5/8 inch) overall width keeps the recess narrow, which is useful on slimmer drawer rails or narrower stile sections where wider pulls would crowd edges.
The defined 93mm (3-11/16 inch) by 34mm (1-5/16 inch) mounting hole provides fixed dimensions for routing templates, which supports repeatable cutouts across multiple fronts. The 115mm (4-1/2 inch) overall length lets installers line up pulls evenly along the width of drawers or doors, helping maintain consistent sightlines on banks of cabinets. With a 14mm (9/16 inch) projection or depth, the DP4115-SS sits to a predictable depth inside the recess, which simplifies setting up machining for both depth and edge clearances. Side screw, pin mounted, or glued mounting choices allow the same pull design to be used with different shop standards, whether fasteners are driven from the side edge or the pull is bonded into the opening.
The DP4115-SS recessed pull measures 115mm (4-1/2 inch) in overall length and 42mm (1-5/8 inch) in width, which defines the visible footprint on the drawer or door front.
The recessed area for the DP4115-SS uses a 93mm (3-11/16 inch) by 34mm (1-5/16 inch) mounting hole, which sets the routing template size for the pull pocket.
The EPCO DP Series recessed pull has a 14mm (9/16 inch) projection or depth, so it occupies that depth inside the door or drawer recess.
The DP4115-SS pull can be side screw mounted, pin mounted, or glued, providing several attachment methods to suit different shop practices.
The DP4115-SS recessed pull is made of stainless steel with a stainless steel finish, giving a consistent metal appearance on cabinet fronts.
The DP4115-SS pulls mount flush with the face of the drawer or door, keeping the front surface low profile around the grip area.
The EPCO DP Series DP4115-SS recessed pull combines a 115mm (4-1/2 inch) by 42mm (1-5/8 inch) footprint with a 93mm (3-11/16 inch) by 34mm (1-5/16 inch) mounting hole, which simplifies layout for consistent recesses on drawers and doors. Stainless steel material and finish match metal-focused projects, while the 14mm (9/16 inch) depth defines a clear machining target in the panel. With side screw, pin mounted, or glued attachment options, this recessed pull supports different shop installation preferences on stainless-accented casework.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | EPDP4115-PC Mfr# DP4115-PC | EPCO DP 4-1/2" (114 mm) Length Polished Chrome Recessed Pull, DP4115-PC | ||||
Sold in: 1 Each | EPDP485-PC Mfr# DP485-PC | EPCO DP 3-3/8" (86 mm) Length Polished Chrome Recessed Pull, DP485-PC | ||||
Sold in: 1 Each | EPDP485-SS Mfr# DP485-SS | EPCO DP 3-3/8" (86 mm) Length Stainless Steel Recessed Pull, DP485-SS |