Rev-A-Shelf UT Series 11-1/2"Wx21-1/4"Dx2-3/8"H White Utensil Tray Insert, -UT-10W-10
Description
Choose a Rev-A-Shelf utensil tray insert
Rev-A-Shelf utensil tray insert gives kitchen drawers a defined place for flatware, serving pieces, and everyday utensils. This white utensil tray insert is part of the Rev-A-Shelf UT Series and is made from heavy gauge plastic for drawer organization in residential or shop-built cabinetry. The product is a drawer insert with a listed size of 11-1/2 inches wide, 21-1/4 inches deep, and 2-3/8 inches high. Rev-A-Shelf states that UT Series trays can be trimmed to accommodate drawer dimensions, which helps buyers working with drawers that are close to, but not exactly, the listed size. The tray ships with a clear protective coating that should be peeled off before use. For buyers comparing trays, dividers, and other kitchen drawer insert options, this model focuses on simple utensil organization in a white finish.
Use drawer inserts for organized utensils
- Rev-A-Shelf UT Series drawer insert - gives utensils and flatware a dedicated layout inside a kitchen drawer.
- 11-1/2 inch width - helps buyers compare the tray to drawer interior width before ordering.
- 21-1/4 inch depth - supports planning for front-to-back drawer fit in standard cabinet layouts.
- 2-3/8 inch height - helps confirm sidewall depth and clearance inside the drawer box.
- Heavy gauge plastic construction - provides a durable tray body for repeated daily use.
- White finish - coordinates with light interiors and makes stored utensils easier to see.
- Trim-to-accommodate design - gives installers flexibility when drawer dimensions are close to the standard tray size.
- Clear protective coating ships on the tray - helps protect the visible surface before final installation and use.
- Utensil tray insert product type - separates loose items into trays and dividers for cleaner drawer organization.
Confirm white utensil tray insert fit
Key specs to confirm: This white utensil tray insert is listed at 11-1/2 inches wide, 21-1/4 inches deep, and 2-3/8 inches high. Buyers should measure the true interior drawer opening, not the cabinet opening, and allow for any drawer hardware, side clearance, or internal obstructions. Because Rev-A-Shelf states that UT Series drawer inserts can be trimmed to accommodate drawer dimensions, confirm how much material needs to be removed and whether trimming will affect the layout you want. This product is described as heavy gauge plastic and part of the UT Series. Safety, load, compliance, and any application-specific limitations are not provided here and should be confirmed with the manufacturer or technical documentation.
What's included: Verified information confirms a Rev-A-Shelf UT Series white utensil tray insert with a clear protective coating that should be peeled off before use. The SAP description identifies this item as a 10 pack. If you need confirmation of exact pack contents for your order unit, verify before purchase.
What to verify before ordering: Confirm drawer interior width, depth, and sidewall height; confirm whether you need a single tray or full box quantity; confirm trimming requirements; confirm the white finish matches your project; and confirm that your drawer layout works for the utensils or cutlery you plan to store.
Compare drawer inserts for daily use
Match cutlery trays to busy drawers
For many buyers, the main issue is not whether they need a tray, but whether the tray will actually fit the drawer and keep tools separated in a practical way. A kitchen drawer insert like this one is often used in new cabinet builds, refits, or replacement projects where loose utensils create clutter and slow down daily work. The Rev-A-Shelf utensil tray insert is intended for that type of organization task. It is a plastic drawer insert in the UT Series, made from heavy gauge plastic, with a white finish and a 2-3/8 inch depth.
If you are outfitting a kitchen drawer for forks, spoons, serving tools, or mixed cutlery trays, the listed 11-1/2 inch by 21-1/4 inch size gives you a clear starting point for measuring. That matters for installers and serious DIY buyers because drawer boxes often vary by slide type, material thickness, and interior construction. Rev-A-Shelf also states that these drawer inserts can be trimmed to accommodate drawer dimensions, which is useful when the interior is close to the tray size but not exact. Before trimming, confirm how the tray layout will line up with the utensils you want to store and whether your drawer has any notches, screws, or hardware that reduce usable space.
This tray can also make sense where buyers are comparing trays, dividers, and other drawer inserts for a clean, repeatable layout across multiple drawers. The white color can help with visibility inside the drawer, and the protective coating helps keep the surface covered until the tray is ready to use. If you are ordering for a shop, multifamily project, or repeated cabinet run, verify whether you need broken quantity or full box quantity, since the product data notes both sales options and identifies bulk sold in full box quantities only.
Compare white utensil tray insert options
When buyers compare drawer inserts, the practical differences usually come down to material, color, depth, and how much fitting work is required. This Rev-A-Shelf drawer insert is described as heavy gauge plastic, which gives buyers a clear material reference for a molded tray rather than a wood organizer or assembled divider kit. It is also part of a standard plastic drawer insert series, which helps buyers looking for consistency across multiple cabinets.
Another point of comparison is finish. UT Series utility trays are available in almond, white, and glossy white according to the product description, while this specific item is the white utensil tray insert version. That matters if you are trying to match an existing rev a shelf layout or maintain a uniform appearance across several kitchen drawers. Buyers should still confirm the exact finish they need before ordering, especially if they are matching earlier installations or adjacent trays.
Fit flexibility is another reason buyers may choose this product type. A fixed-size tray can work well when the drawer opening closely matches the tray dimensions, while a trim-capable tray can reduce the need to search for an exact custom size. Because only the listed dimensions and trim-to-accommodate note are verified here, buyers should confirm trimming method, final fit, and any jobsite-specific requirements in advance. That is especially useful when ordering multiple revashelf trays for a cabinet package, where consistency matters more than trial-and-error fitting.
Check cutlery trays before ordering
Will this utensil tray fit any kitchen drawer?
This Rev-A-Shelf utensil tray insert fits drawers that can accept its 11-1/2 inch width, 21-1/4 inch depth, and 2-3/8 inch height, subject to actual interior drawer measurements.
Can this white utensil tray insert be trimmed?
This Rev-A-Shelf UT Series tray is described as able to be trimmed to accommodate drawer dimensions. Confirm the required cut amount and final layout before installation.
What material is this drawer insert made from?
This Rev-A-Shelf drawer insert is made of heavy gauge plastic according to the verified product description.
What color is this cutlery tray?
This utensil tray insert is white. Rev-A-Shelf also lists UT Series utility trays in almond and glossy white, but this item is the white version.
Do I measure the cabinet or the drawer for fit?
This kitchen drawer insert should be matched to the interior drawer dimensions, not the outside cabinet size. Measure usable inside width, depth, and height before ordering.
Does the tray come ready to use out of the box?
This Rev-A-Shelf tray ships with a clear protective coating. Peel off the coating before use.
Is this product sold as a single tray or a pack?
This product is identified in the SAP description as a 10 pack, and the sales note mentions broken and full box quantities. Confirm your order unit before purchase.
Can I use this tray for more than flatware?
This utensil tray insert can be used for utensils and similar drawer items if the compartments and overall size suit your layout. Confirm your storage needs before trimming.
Are load ratings or compliance details provided?
This product listing does not provide load, safety, or compliance details. Follow manufacturer installation guidance and local building requirements where applicable.
Order Rev-A-Shelf drawer inserts confidently
Rev-A-Shelf drawer inserts are easiest to order when you confirm the actual drawer interior, the white finish, and whether the listed 10 pack matches your project quantity. This utensil tray insert includes the verified tray dimensions, heavy gauge plastic construction, and protective coating noted in the product data. Before purchase, check drawer width, depth, height, and any trimming needs so the tray fits your cabinet layout and the utensils you plan to store.
