Rev-A-Shelf UT Series 11-1/2"Wx21-1/4"Dx2-3/8"H Almond Utensil Tray Insert, -UT-10A-52
Description
Choose a Rev-A-Shelf drawer insert
Rev-A-Shelf utensil tray insert is a polymer drawer insert made for organizing kitchen utensils in a drawer footprint that measures 11-1/2 inches wide, 21-1/4 inches deep, and 2-3/8 inches high. This Rev-A-Shelf drawer insert is part of the UT Series and comes in an almond finish. The tray is made of heavy gauge plastic and ships with a clear protective coating that should be peeled off before use. Buyers looking for revashelf trays, a cutlery tray, or drawer dividers for a kitchen project can use this insert where the drawer size and depth match the verified dimensions. The tray can be trimmed to accommodate drawer dimensions, which helps when cabinet interiors vary slightly from one installation to another.
See how this utensil tray helps
- Rev-A-Shelf UT Series drawer insert - gives buyers a defined utensil organization format from a recognized cabinet accessory brand.
- 11-1/2 inch width - helps you match the tray to narrower drawer layouts before ordering.
- 21-1/4 inch depth - supports longer drawer runs where a full-length utensil tray is needed.
- 2-3/8 inch height - helps buyers confirm drawer side and interior clearance for proper fit.
- Heavy gauge plastic construction - provides a sturdy polymer tray body for daily kitchen utensil storage.
- Almond finish - supports projects that need a warm neutral insert color inside the drawer.
- Trim-to-fit design - allows the utensil tray insert to be adjusted to accommodate drawer dimensions where appropriate.
- Clear protective coating included for shipping - helps keep the tray surface protected until installation and should be peeled off before use.
Confirm drawer insert fit before ordering
Key specs to confirm: This polymer utensil tray insert is listed at 11-1/2 inches wide, 21-1/4 inches deep, and 2-3/8 inches high. Confirm your actual drawer interior width, usable depth, and side height before ordering. Because the product description states that UT Series trays can be trimmed to accommodate drawer dimensions, buyers should also confirm where trimming is acceptable in their application and whether surrounding hardware affects fit. Material is verified as heavy gauge plastic, and the finish is almond. Safety, load, compliance, and any installation hardware details are not provided here and should be confirmed with the manufacturer or technical documentation if needed.
What's included: One Rev-A-Shelf UT Series almond utensil tray insert with a clear protective coating applied for shipping. Peel off the coating before use.
What to verify before ordering: Check drawer interior measurements, required tray depth, drawer clearance at 2-3/8 inches high, desired almond color match, and whether your installation will require trimming. If you need mounting hardware or additional accessories, confirm those items separately.
Compare polymer utensil tray insert details
Use this cutlery tray in busy drawers
A polymer utensil tray insert is often chosen when a buyer wants a simple way to separate everyday kitchen tools without building custom wood organizers. This Rev-A-Shelf utensil tray insert fits that need when the drawer interior can accept the verified 11-1/2 inch width, 21-1/4 inch depth, and 2-3/8 inch height. In a kitchen remodel, a contractor may use this drawer insert to create a dedicated area for spoons, forks, serving tools, or mixed utensils inside a standard drawer. In a repair or refresh project, a serious DIY buyer may replace a worn tray with a new almond utensil tray insert that better matches the cabinet interior.
The practical value comes from the product type and material. A heavy gauge plastic tray is straightforward to clean and suited to repeated use in a kitchen drawer. The UT Series description also states that these trays can be trimmed to accommodate drawer dimensions. That matters when the cabinet box is close to the tray size but not exact. Buyers searching for a cutlery tray, drawer dividers, or revashelf trays often need that flexibility because actual drawer interiors can vary by cabinet maker, slide type, and drawer construction.
Before purchase, it is important to confirm the true inside dimensions of the drawer rather than the outside drawer front size. Buyers should also check whether drawer hardware, slide members, or interior obstructions reduce usable width or depth. If trimming is planned, confirm the acceptable trim area and final fit based on the manufacturer guidance. For projects where appearance matters, verify that almond is the right finish for the cabinet interior and surrounding accessories. If you are trying to match existing rev a shelf inserts in nearby drawers, compare color and dimensions carefully before ordering.
Compare drawer insert build and fit
When buyers compare drawer insert options in general, the most useful differences are usually material, dimensions, finish, and whether the tray can be adjusted to suit the drawer. This Rev-A-Shelf drawer insert gives verified information in each of those areas. It is a heavy gauge plastic utensil tray insert, it comes in almond, and it is listed at 11-1/2 inches by 21-1/4 inches by 2-3/8 inches. The product description also states that UT Series trays can be trimmed to accommodate drawer dimensions.
That combination helps buyers who want a ready-made organizer instead of a field-built insert. A polymer utensil tray insert can be a practical choice for installations where easy cleanup and consistent molded sections matter more than a custom fabricated layout. The clear protective coating applied for shipping is another useful detail because it indicates the tray arrives with a removable surface layer intended to be peeled off before use.
For reliability in ordering, the strongest approach is to compare your drawer's usable interior space to the verified tray dimensions and then confirm whether trimming is needed. If your application requires exact compartment layout, hardware, or technical documentation, those details should be reviewed before purchase because they are not fully specified here. Buyers who focus on fit first are more likely to choose the right trays for the job and avoid delays caused by preventable sizing mistakes.
Check drawer insert fit and install questions
Will this drawer insert fit any kitchen drawer?
This Rev-A-Shelf drawer insert fits drawers that can accept 11-1/2 inches wide, 21-1/4 inches deep, and 2-3/8 inches high, subject to actual interior clearance.
Can this utensil tray insert be trimmed?
This UT Series utensil tray insert is described as trimmable to accommodate drawer dimensions. Confirm acceptable trim areas with manufacturer guidance before cutting.
What material is this cutlery tray made from?
This Rev-A-Shelf cutlery tray is made of heavy gauge plastic, which the product description identifies as the tray material.
What color is this drawer insert?
This drawer insert is almond. Buyers matching existing cabinet accessories should verify the finish against their project requirements.
Does the tray come with a protective film?
This Rev-A-Shelf utensil tray insert ships with a clear protective coating that should be peeled off before use.
Do I need to measure the drawer front or the inside of the drawer?
This drawer insert should be matched to the usable interior drawer dimensions, not the outside drawer front size.
Is installation hardware included?
This product data verifies the tray insert and protective coating only. Any hardware or extra accessories should be confirmed before ordering.
Can this tray be used for utensils only?
This utensil tray insert is intended for drawer organization. Buyers can use it for similar drawer contents if the dimensions and layout suit the application.
What should I check before ordering this tray?
This Rev-A-Shelf drawer insert requires confirmation of interior width, depth, height clearance, finish preference, and any planned trimming. Follow manufacturer installation guidance and local building requirements where applicable.
Order the right almond utensil tray
Rev-A-Shelf drawer insert works best when the drawer opening, usable depth, and side clearance are checked against the verified 11-1/2 inch by 21-1/4 inch by 2-3/8 inch size. You are ordering an almond heavy gauge plastic utensil tray insert with a removable protective coating for shipping. Before purchase, confirm whether trimming is needed, whether almond matches the project, and whether any accessories or hardware must be sourced separately for your installation.
