
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Rev-A-Shelf utensil tray insert gives kitchen drawers a defined place for utensils, flatware, and small tools while keeping the layout easy to see at a glance. This Rev-A-Shelf drawer insert is a standard plastic organizer from the UT Series, made from heavy gauge plastic and sized at 14-1/4 inches wide, 21-1/4 inches deep, and 2-3/8 inches high. The almond finish works where a neutral cutlery tray is preferred, and the tray can be trimmed to accommodate drawer dimensions. For buyers comparing drawer inserts, this plastic drawer insert is built for practical drawer organization rather than decorative use. UT Series trays ship with a clear protective coating that should be peeled off before use.
Key specs to confirm: This polymer utensil tray insert is listed at 14-1/4 inches wide, 21-1/4 inches deep, and 2-3/8 inches high. Buyers should confirm the actual inside drawer width, inside drawer depth, and side clearance before ordering, especially if the tray will be trimmed to fit. Because this is a drawer insert, also check that the drawer box height and any hardware inside the drawer will not interfere with placement. If you need safety, load, compliance, or other technical details, those are not provided here and should be confirmed with the manufacturer or technical documentation.
What's included: One Rev-A-Shelf UT Series almond utensil tray insert. UT Series trays ship with a clear protective coating that should be peeled off before use.
What to verify before ordering: Confirm your drawer's inside measurements, whether trimming is needed, whether almond is the preferred finish, and whether your project requires a single tray or full box quantity. Check for any obstructions inside the drawer before installation.
A cutlery tray is usually chosen when a drawer has enough footprint for organized utensil storage but still needs a simple insert that can be adapted on site. This Rev-A-Shelf utensil tray insert fits that type of project well because it is a standard plastic drawer insert with defined dimensions and a trim-to-fit design. In a kitchen remodel, a cabinet shop may use drawer inserts like this to create a cleaner handoff to the homeowner, especially in wide utility or flatware drawers that would otherwise collect loose utensils. In a repair or refresh job, the same tray can help replace a worn organizer without changing the drawer box.
For professional installers, the practical value is straightforward. The tray is made of heavy gauge plastic, so it is intended for regular drawer use. The listed size of 14-1/4 inches by 21-1/4 inches by 2-3/8 inches gives a starting point for layout and fit checks. Because the product description states these trays can be trimmed to accommodate drawer dimensions, buyers working with non-standard drawer interiors have more flexibility than they would with a fixed-size organizer. That matters when drawer boxes vary slightly from plan dimensions or when a jobsite cabinet has interior hardware that changes usable space.
For serious DIY buyers, this cutlery divider style insert helps reduce drawer clutter and keeps common utensils easier to sort. The almond finish is useful when a neutral tray color is preferred over white or glossy white. Before purchase, it is still important to verify the inside drawer measurements rather than relying on nominal cabinet size. If your drawer uses unusual slides, has interior screws, or includes a shallow drawer front profile, confirm that the 2-3/8 inch tray height and overall footprint will work. If you need compartment counts or exact compartment layout, that information is not provided here and should be confirmed before ordering.
When buyers compare a plastic drawer insert with more basic loose trays, the main difference is consistency of fit and intended use. A purpose-made Rev-A-Shelf drawer insert is sold as a cabinet accessory for drawer organization, not as a general household bin. That makes it more relevant for cabinet and woodworking projects where dimensions, material type, and repeatable ordering matter. The UT Series format also gives buyers a known product family to work from when matching multiple drawers or planning future replacements.
Compared with generic organizers, a polymer utensil tray insert that can be trimmed offers more installation flexibility for cabinet interiors that are close to, but not exactly, standard dimensions. Heavy gauge plastic also matters for buyers who want a tray intended for routine kitchen drawer use. The included protective coating is another practical detail because it helps keep the tray surface covered until final setup. While some buyers may compare only by color or price, the more useful comparison is by inside drawer dimensions, trim needs, and whether the drawer should hold cutlery, utensils, or mixed kitchen tools. This product is strongest where those fit and use questions are answered before ordering.
This cutlery tray fits drawers that can accept its 14-1/4 inch width, 21-1/4 inch depth, and 2-3/8 inch height. Measure the inside drawer space before ordering.
This Rev-A-Shelf utensil tray insert is described as trim-to-fit for accommodating drawer dimensions. Confirm your target size and trimming method before installation.
This Rev-A-Shelf drawer insert is made of heavy gauge plastic. The product is also described as a polymer utensil tray insert.
This plastic drawer insert is almond. UT Series utility trays are available in multiple colors, but this specific item is the almond version.
This utensil tray insert ships with a clear protective coating. Peel the coating off before use.
This cutlery divider is sold in the Kitchen and Bath Cabinet Accessories category, but buyers should confirm drawer dimensions and intended use for their specific project.
This drawer insert has a 2-3/8 inch height, so inside drawer height should be checked to avoid interference with the drawer box or stored items.
This product listing verifies the tray insert and protective coating only. Follow manufacturer installation guidance and local building requirements where applicable.
This Rev-A-Shelf utensil tray insert is sold in both broken and full box quantities. Full box packing is 20 each per box.
Rev-A-Shelf drawer insert selection starts with accurate inside drawer measurements and a clear plan for whether trimming is needed. This almond UT Series utensil tray insert includes the tray itself and a protective coating to remove before use. Before purchase, confirm the 14-1/4 inch width, 21-1/4 inch depth, and 2-3/8 inch height against your drawer interior, and verify that no hardware or drawer details will interfere. For trade buyers and serious DIY projects, checking fit first helps avoid ordering a cutlery tray that needs more adjustment than expected.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | RSGUT12W Mfr# GUT-12W-20 | Rev-A-Shelf GUT Series 14-1/4"Wx21-1/4"Dx2-3/8"H White Utensil Tray Insert, -GUT-12W-20 | ||||
Sold in: 1 Each | RSUT12W Mfr# UT-12W-20 | Rev-A-Shelf UT Series 14-1/4"Wx21-1/4"Dx2-3/8"H White Utensil Tray Insert, -UT-12W-20 |