Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf utensil tray insert gives kitchen drawers a defined place for utensils and small tools while keeping layout simple to maintain. This Rev-A-Shelf drawer insert is part of the GUT Series and is made from heavy gauge plastic in a white finish. The tray measures 14-1/4 inches wide, 21-1/4 inches deep, and 2-3/8 inches high. A cutlery tray like this can also serve as a cutlery divider in utility drawers where separated storage matters. The white utensil tray ships with a clear protective coating that should be peeled off before use. Product data also states these standard plastic drawer inserts can be trimmed to accommodate drawer dimensions, which helps when working with varied cabinet interiors.
Key specs to confirm: This white utensil tray is listed at 14-1/4 inches wide, 21-1/4 inches deep, and 2-3/8 inches high. Before ordering, measure the actual inside width, inside depth, and usable drawer height after slides and hardware are installed. Product data states the tray can be trimmed to accommodate drawer dimensions, but the exact trim limits and best cutting method should be confirmed before modification. If you need material details beyond heavy gauge plastic, or need compliance, load, or other technical data, confirm those points with the manufacturer or technical documentation.
What's included: One Rev-A-Shelf GUT Series white utensil tray insert with a clear protective coating applied for shipping and handling.
What to verify before ordering: Confirm your drawer's inside measurements, confirm that 2-3/8 inch tray height works with your drawer clearance, confirm whether trimming is needed, and confirm the exact finish you want since utility trays are offered in multiple colors in this series.
A cutlery divider is often chosen when a drawer has enough area for utensils but not enough structure to keep them separated. In many kitchens, loose flatware, serving tools, and prep utensils shift every time the drawer opens. That slows down daily work and makes drawers harder to clean. A Rev-A-Shelf utensil tray insert addresses that issue by giving the drawer a fixed insert format rather than relying on loose bins or temporary organizers.
This model is useful for cabinet shops, installers, and serious DIY buyers who already know the drawer opening they need to fit. The listed size of 14-1/4 inches wide by 21-1/4 inches deep gives a clear starting point for drawer planning. Because the product data states these standard plastic drawer inserts can be trimmed to accommodate drawer dimensions, it may also suit projects where the interior is close to standard but needs adjustment. Buyers should still confirm how much material can be removed for their application and whether drawer hardware reduces usable width or depth.
This white utensil tray can work in kitchen drawers used for flatware, mixed utensils, or general utility storage. The 2-3/8 inch depth is relevant when a drawer needs enough wall height to contain everyday items without creating a shallow, low-capacity layout. The heavy gauge plastic body also matters in settings where the tray will be removed for cleaning or handled often during use. For buyers searching rev a shelf, revashelf, RSUT12W, or RSGUT12W, the main purchase decision is usually fit. Measure the interior after the drawer box and slides are fully installed, then compare that space to the tray dimensions and any planned trimming.
When comparing a plastic drawer insert to other organizer styles, the main differences usually come down to fit consistency, maintenance, and installation effort. A one-piece molded tray gives a defined layout from the start. That can be easier to place in production cabinetry or retrofit work than assembling multiple loose organizers. For buyers who want a simple cutlery tray or cutlery divider, a molded insert can reduce guesswork because the storage zones are built into the product type itself.
This Rev-A-Shelf drawer insert also offers practical consistency through a known brand and series reference. That helps when matching several drawers in one kitchen or replacing an existing insert with the same general format. The white finish supports visibility inside the drawer, and the protective coating helps preserve the surface until final placement. The product data does not provide custom fit ranges, accessory packs, or hardware details, so those points should be confirmed if your project depends on them.
Compared with organizer approaches that rely on several separate pieces, a single plastic drawer insert is often simpler to position and evaluate against measured interior dimensions. Compared with unfinished materials, heavy gauge plastic can also be easier to wipe clean in a kitchen setting. The key is to confirm that the tray's 14-1/4 inch width, 21-1/4 inch depth, and 2-3/8 inch height align with your drawer interior and any trim-to-fit plan before ordering.
This cutlery tray fits drawers that can accept its 14-1/4 inch width, 21-1/4 inch depth, and 2-3/8 inch height, subject to your actual inside drawer measurements.
This Rev-A-Shelf drawer insert is described as trim-to-fit for accommodating drawer dimensions, but the exact trim limits should be confirmed before cutting.
This white utensil tray is made from heavy gauge plastic according to the product data.
The Rev-A-Shelf utensil tray insert ships with a clear protective coating that should be peeled off before use.
This plastic drawer insert requires you to verify inside width, inside depth, and usable drawer height after slides and hardware are installed.
This Rev-A-Shelf GUT Series product is presented as a utensil tray insert and utility tray style drawer insert.
The 2-3/8 inch tray height must be compared to your usable drawer clearance, especially if hardware or drawer construction reduces interior space.
Included hardware is not listed in the verified product data, so buyers should confirm whether the tray is simply placed in the drawer or needs additional retention.
This cutlery divider should be installed according to manufacturer installation guidance and local building requirements where applicable.
Rev-A-Shelf drawer insert selection comes down to matching the tray to your actual drawer interior and intended use. This GUT Series white utensil tray insert is a heavy gauge plastic tray sized at 14-1/4 inches wide, 21-1/4 inches deep, and 2-3/8 inches high, with a protective coating to remove before use. Before purchase, confirm inside drawer measurements, confirm whether trimming is required, and confirm that one tray insert is the only component needed for your project. Taking those steps helps you avoid fit issues and order the right cutlery tray for the drawer the first time.
white utensil tray buyers usually need clear dimensions, known material, and a straightforward fit check before placing an order. This Rev-A-Shelf utensil tray insert provides all three starting points from the verified product data. Review the listed size, confirm drawer clearance, and verify whether trim-to-fit adjustment is appropriate for your cabinet. Included content is limited to the tray insert with protective coating, so confirm any installation expectations before purchase.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  RSUT12A Mfr# UT-12A-20 | Rev-A-Shelf UT Series 14-1/4"Wx21-1/4"Dx2-3/8"H Almond Utensil Tray Insert, -UT-12A-20 | ||||
Sold in: 1 Each |  RSUT12W Mfr# UT-12W-20 | Rev-A-Shelf UT Series 14-1/4"Wx21-1/4"Dx2-3/8"H White Utensil Tray Insert, -UT-12W-20 |