Rev-A-Shelf GUT Series 17-1/2"Wx21-1/4"Dx2-3/8"H White Utensil Tray Insert, -GUT-15W-20

Choose a Rev-A-Shelf utensil tray insert

Rev-A-Shelf utensil tray insert gives kitchen drawers a defined place for utensils and small tools while keeping layout planning straightforward. This Rev-A-Shelf drawer insert is a white utensil tray insert made for drawer organization, with a verified size of 17-1/2 inches wide, 21-1/4 inches deep, and 2-3/8 inches high. The product is part of the GUT Series from Rev-A-Shelf Corporation and is described as a heavy gauge plastic insert. A clear protective coating ships on the tray and should be peeled off before use. For buyers comparing a cutlery tray, cutlery divider, or plastic drawer insert, this model is built to be trimmed to accommodate drawer dimensions when needed. Its glossy white finish also fits projects that need a clean, bright drawer interior.

See how this cutlery tray helps

• 17-1/2 inch width - Helps buyers match the Rev-A-Shelf utensil tray insert to drawer plans before cutting or final placement.
• 21-1/4 inch depth - Gives this cutlery tray a full-length format for standard kitchen drawer organization where depth matters.
• 2-3/8 inch height - Provides a defined tray wall height for sorting utensils and small kitchen items inside the drawer.
• Heavy gauge plastic construction - Gives the plastic drawer insert a rigid feel suited to repeated daily use in kitchen drawers.
• Glossy white finish - Makes the white utensil tray insert easy to pair with bright drawer interiors and light cabinet builds.
• Trim-to-fit design - Lets installers adapt the Rev-A-Shelf drawer insert to drawer dimensions when exact sizing needs adjustment.
• Clear protective coating included on shipment - Helps keep the glossy surface protected until the tray is ready to install and use.
• Rev-A-Shelf GUT Series format - Gives buyers a clear product family reference when matching other drawer organization parts in a project.

Confirm cutlery tray fit before ordering

Key specs to confirm: This cutlery tray is listed at 17-1/2 inches wide, 21-1/4 inches deep, and 2-3/8 inches high. Buyers should confirm the inside drawer width, inside drawer depth, and sidewall clearance before ordering, especially if the tray will be trimmed to fit. Because this is a drawer insert, it is also important to verify whether drawer hardware, box construction, or interior obstructions reduce usable space. Material is verified as heavy gauge plastic, and finish is glossy white. Any load guidance, compliance details, or other technical limits are not provided here and should be confirmed with the manufacturer or technical documentation.

What's included: Verified product information identifies one Rev-A-Shelf GUT Series white utensil tray insert with a clear protective coating that should be peeled off before use. No mounting hardware or extra accessories are specified in the verified data.

What to verify before ordering: Confirm actual interior drawer dimensions, whether trimming is required, whether the 2-3/8 inch tray height fits below the drawer opening, and whether any slides or box joints reduce usable space. If your project needs exact accessory contents or installation details, confirm them before purchase.

Use a cutlery divider for busy drawers

Use this cutlery tray in daily kitchens

A cutlery divider like this is useful when a drawer has enough footprint for utensils but lacks a defined layout. In many kitchens, loose flatware, serving pieces, and prep tools shift every time the drawer opens. A dedicated cutlery tray helps separate those items into repeatable zones so the user can find what they need faster and keep the drawer from turning into a catch-all space.

This Rev-A-Shelf utensil tray insert is aimed at buyers who want a ready-made organizer rather than building internal partitions from scratch. The verified dimensions of 17-1/2 inches by 21-1/4 inches by 2-3/8 inches give installers a starting point for layout checks. The product data also states that these trays can be trimmed to accommodate drawer dimensions. That matters when the drawer box is close to the listed size but not exact, or when a project needs a cleaner fit around the drawer interior. Before trimming, the buyer should confirm actual inside measurements and check for any drawer slide intrusion or corner joinery that changes usable space.

The heavy gauge plastic construction is another practical point for a kitchen drawer organizer. A plastic drawer insert is easy to wipe clean and simple to place inside a drawer without separate assembly details being required in the verified information. The glossy white cutlery tray finish suits cabinet interiors where a bright, clean look is preferred. Because the tray ships with a clear protective coating, installers can leave that layer in place during handling and remove it before final use.

This type of rev a shelf insert can fit both professional cabinet work and serious DIY upgrades. It is especially useful for remodels where the drawer already exists and the buyer needs an insert that can be adapted to the available interior dimensions. If the project depends on exact compartment layout, accessory count, or special mounting methods, those details should be confirmed before ordering because they are not specified in the verified data.

Compare this plastic drawer insert with confidence

When buyers compare drawer inserts, the first checkpoints are usually material, size, finish, and whether the tray can be adapted to the drawer. This Rev-A-Shelf drawer insert gives clear verified information in those areas. It is a heavy gauge plastic drawer insert in glossy white, and its listed size is 17-1/2 inches wide, 21-1/4 inches deep, and 2-3/8 inches high. The product description also states that the tray can be trimmed to accommodate drawer dimensions.

That combination can make selection easier than choosing an insert with unclear sizing or unspecified material. Buyers can start with the listed dimensions, compare them to the actual drawer interior, and then decide whether trimming is appropriate for the project. The clear protective coating is another useful shipping detail because it helps preserve the visible surface until installation is complete.

For trust and consistency, brand clarity matters. This product is identified as a Rev-A-Shelf GUT Series utensil tray insert from Rev-A-Shelf Corporation, so buyers know the exact product family and manufacturer part number they are reviewing. That is helpful when matching paperwork, reorder needs, or project specifications. If your job requires exact installation instructions, compartment details, or technical limits beyond the published dimensions and material description, confirm those points with the manufacturer documentation before finalizing the order.

Ask fit questions about this drawer insert

Order the right white utensil tray insert

White utensil tray insert selection is easiest when you confirm the actual drawer interior before ordering. This Rev-A-Shelf drawer insert is a glossy white, heavy gauge plastic tray listed at 17-1/2 inches wide, 21-1/4 inches deep, and 2-3/8 inches high, with a clear protective coating to remove before use. Review whether trimming is needed, check for slide or box obstructions, and confirm that the included item is the tray insert itself. Those steps help you order the right cutlery tray for your drawer layout.