Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Omega National AG-100 Series appliance garage in alder wood veneer provides an 18-inch-wide enclosure for countertop appliances, keeping them off the counter surface and behind a door without losing access to them.
A countertop appliance garage solves a specific problem: appliances that live on the counter full-time take up workspace and visual real estate, but pulling them in and out of a cabinet each time is a chore. This enclosure keeps a toaster, drip coffee maker, or small appliance at counter height, behind a door, so the counter clears without the appliance disappearing into a lower cabinet. The 18-inch width accommodates a standard single appliance without oversizing the opening in a typical upper-cabinet run.
The shell is built with an alder wood veneer, a species with a fine, even grain that takes stain evenly and paints cleanly. Because it arrives unfinished, the cabinetmaker or installer controls the final color and sheen, which means this garage can be matched precisely to the surrounding cabinet finish rather than settling for a factory approximation. Alder is well suited to painted kitchens where a smooth, consistent surface matters, and it holds detail well for stained applications too.
This unit is the right call on a straight upper-cabinet run where the countertop appliance load is one appliance wide. Kitchen designers specifying a full custom build often use a dedicated appliance garage section to keep the counter plan clean; cabinetmakers building semi-custom or full-custom kitchens will find the unfinished veneer practical because it integrates into the shop's finish schedule. The 18-inch width and straight geometry make it a natural fit for a standard upper section slot between wall cabinets. A ventilation insert, tambour door, or door hardware for this garage is not included in the shell and is ordered separately based on the installation's requirements.
No. The AG-100SVAL18 is the wood shell enclosure only. A tambour door, tambour track, tambour hardware pack, and any door pull are ordered separately to suit the specific installation.
No. This is a decorative wood enclosure and does not include any ventilation hardware. If the installation requires a ventilation insert, that unit is a separate component.
Alder accepts most water-based and oil-based stains and paints. Its fine, even grain is especially forgiving in painted applications. Match the finish to the surrounding cabinetry and apply a topcoat consistent with the rest of the kitchen finish schedule.
The 18-inch width and 11-7/8-inch depth fit most standard single-appliance footprints. Measure the appliance before ordering, particularly the depth, since countertop appliances vary and the garage opening needs to clear the unit with the door open.
This 18-inch alder veneer appliance garage gives cabinetmakers and designers a ready-to-finish shell that integrates into a straight upper-cabinet run and keeps a countertop appliance accessible without leaving it on display.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  RSAG100SSAL-18 Mfr# AG-100SAL-18 | Omega National AG-100 Series Alder Appliance Garages 18"W x 11-7/8"D, Solid Wood - AG-100SAL-18 |
