Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPAG100SVC-18 to RSAG100SVC-18.
Omega National cherry appliance garage gives you an 18 inch wide, straight-front storage unit built around a tambour door, so small countertop appliances can be concealed behind a matching wood element within a cabinet run. The AG-100SVC-18 model uses an 18-3/4 inch high solid wood frame, which creates a defined opening size and a rigid structure for the tambour track, so the door operates consistently once installed in a cabinet layout. Wood veneer on the tambour door ties visually to the cherry specification, helping the garage blend with cherry cabinetry where a wood-faced front is required. Two veneer faced end panels in 3/8 inch thick MDF at 11 inches wide by 19 inches high complete the three piece unit, so the sides visually finish the opening while the thinner MDF construction keeps overall weight moderate when integrating the unit into a cabinet assembly.
The 18-3/4 inch high solid wood frame defines the vertical footprint of this straight appliance garage, so installers work with a known frame height when aligning it under wall cabinets or between uprights. With an 18 inch frame width, the AG-100SVC-18 size guides how much linear space to reserve on a countertop section where a cherry garage is planned. The 11-7/8 inch depth listing ties to the straight garage category, so the installer can relate this depth to standard upper cabinet depths when positioning the unit along the back of the counter. Two 11 inch wide by 19 inch high veneer faced end panels in 3/8 inch MDF create side coverage that extends slightly beyond the frame height, which influences how the sides meet adjacent cabinet faces in a continuous line.
This Omega National AG-100 Series cherry appliance garage is built for kitchen and bath cabinet applications as described in its category, placing it in cabinet runs where small appliances need a dedicated bay. The 18 inch wide frame aligns with narrower cabinet openings, so it fits scenarios where only a limited counter span is available next to a corner or tall cabinet. At 11-7/8 inches deep, the straight garage participates in a typical appliance garage footprint, keeping storage close to the wall side of the counter while coordinating with upper cabinet depth. The solid wood frame and veneer faced MDF end panels present a wood-based construction that visually suits projects using wood cabinets, so the garage can be integrated as another wood-front element within the overall run.
The tambour door in this appliance garage is designed around a spring tension track system that provides smooth, non-binding operation, so opening and closing the door remains controlled along the entire travel path. This track approach keeps the tambour aligned in its channel, which helps prevent sticking when the door is raised or lowered many times a day in a busy kitchen. Housing the tambour door and closing mechanism within the 18-3/4 inch solid wood frame further stabilizes the moving parts, so the operating forces stay within a rigid structure instead of flexing cabinet faces. Using veneer wood for the tambour face in cherry lets the moving door visually coordinate with the fixed frame, so the opening reads as a single cherry unit even as the door cycles. Together, these details allow the AG-100SVC-18 to function as a compact, straight-front storage solution that protects appliances behind a door designed for frequent motion.
The appliance garage uses an 18 inch wide frame that is 18-3/4 inches high, so the opening height and width are defined for planning its position within a cabinet run or above a countertop area.
The AG-100SVC-18 is listed at 11-7/8 inches deep, so its footprint aligns with typical appliance garage depth near the back of the countertop and relates to standard upper cabinet depths.
The frame is solid wood and the two end panels are 3/8 inch thick MDF with veneer faces, so installers work with a rigid frame and stable, veneered side panels in one coordinated unit.
The tambour door runs on a spring tension track system that provides smooth, non-binding operation, so the door travels in its track without catching during regular opening and closing.
The closing mechanism is assembled within the solid wood frame housing the tambour door, so the moving components are contained in a single framed unit for consistent motion over time.
Each end panel is 11 inches wide by 19 inches high, so these sides extend beyond the frame height and define how the garage edges align with adjacent cabinet faces in a run.
The Omega National AG-100SVC-18 cherry appliance garage provides an 18 inch wide, straight-front unit with an 18-3/4 inch high solid wood frame and a tambour door on a spring tension track system, so it suits narrow bays needing smooth door operation. Veneer faced, 3/8 inch MDF end panels at 11 inches wide by 19 inches high bring a cherry veneer surface that coordinates with wood cabinetry, so the sides visually finish the opening as part of a wood cabinet array. For projects calling for a straight appliance garage in cherry veneer within the AG-100 Series width set, this model offers defined dimensions and an integrated operating assembly ready to be positioned into a planned cabinet layout.
Sold In: 1 Kit
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  RSAG100SSAL-18 Mfr# AG-100SAL-18 | Omega National AG-100 Series Alder Appliance Garages 18"W x 11-7/8"D, Solid Wood - AG-100SAL-18 |
