Omega National AG-100 Series Maple Appliance Garages 18"W x 11-7/8"D, Wood Veneer - AG-100SVM-18

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPAG100SVM-18 to RSAG100SVM-18.

Omega National Maple Appliance Garage For Countertops

Omega National maple appliance garage gives a straight-front storage solution that matches cabinet runs while keeping counter appliances behind a retracting door. The Omega National AG-100 Series layout supports 18 inch, 24 inch, and 30 inch frame widths, so installers can coordinate this 18 inch unit with wider runs in the same style. The 18-3/4 inch high solid wood frame creates a defined opening for small appliances, helping keep height clear and consistent under wall cabinets. Its wood veneer tambour door is built into the frame, so the door and closing mechanism arrive already assembled for faster shop workflow. The 11-7/8 inch depth works with common countertop depths, leaving space for appliance cords to sit behind the door opening. Maple veneer lets shops match light-tone cabinet programs, giving a unified look across upper and lower cabinetry.

Key Appliance Garage Details That Support Your Layout

• The 18 inch wide Omega National maple appliance garage frame lets you dedicate a defined bay for small appliances, so layout planning around 18, 24, and 30 inch frames stays consistent across a run.
• The 18-3/4 inch high solid wood frame provides full-height clearance inside the opening, helping taller countertop appliances sit behind the tambour door without interfering with adjacent cabinet components.
• Two 11 inch wide by 19 inch high veneer-faced 3/8 inch thick MDF end panels give a finished maple appearance on both sides, so the unit can terminate a run cleanly or sit between cabinets with matching faces.
• The tambour door uses a spring tension track system to create smooth, non-binding travel, which reduces hang-ups during daily use and helps the door return consistently to the closed position.
• Straight units are available in five different species, allowing shops to align species selection with broader kitchen programs and keep grain and color relationships consistent across the installation.
• The choice of veneer wood or solid wood tambour door options in the AG-100 Series lets you match material construction to project standards while keeping the same frame and operating geometry.

Installation-Focused Details Of The 18 Inch Unit

The Omega National maple appliance garage uses a straight-front 18 inch frame, so it drops into standard cabinet runs without changing the front alignment of adjacent wall or base cabinets. The 11-7/8 inch depth keeps the unit comfortably within typical countertop depth, simplifying front-to-back positioning along the wall. The assembled closing mechanism inside the 18-3/4 inch high solid wood frame reduces on-site assembly steps because the tambour door and track system are already integrated. Two 11 inch wide by 19 inch high veneer-faced MDF end panels form the sides, giving installers fixed side dimensions to work with when aligning to neighboring cabinets or side walls. The spring tension track system guides the tambour door along a controlled path, which supports repeatable door motion after the unit is fastened into place.

Using This Appliance Garage In Kitchen Projects

Where The Omega National AG-100SVM-18 Fits Best

The Omega National AG-100 Series 18 inch maple appliance garage is designed as a straight unit, so it works cleanly at the end of a wall cabinet run or between two cabinets with straight fronts. Its 18-3/4 inch high solid wood frame defines a full opening that suits countertop appliances in kitchen and bath cabinet layouts, keeping them behind a retracting tambour door when not in use. The 11-7/8 inch depth pairs with typical countertop depths, so the unit aligns near the front edge while maintaining space at the rear for cords and plugs. Two 11 inch wide by 19 inch high veneer-faced MDF end panels present a maple veneer surface on both sides, supporting exposed-end applications where the side of the unit remains visible. Straight units in five different species give designers flexibility to specify maple here while using other species from the same AG-100 Series in different parts of the project.

Details That Support Smooth Tambour Door Operation

The tambour door in this Omega National maple appliance garage is designed around a spring tension track system, which guides the slats through their travel and provides smooth, non-binding operation during opening and closing. That spring tension arrangement helps the door stay engaged in the tracks as it moves, so the door motion remains consistent over daily cycles. Because the tambour door and closing mechanism are assembled into the 18-3/4 inch high solid wood frame, the interaction between frame, track, and door is established at the factory, giving a consistent operating feel from one unit to the next. Straight units with either veneer wood or solid wood tambour door options share the same operating concept, so shops can choose the veneer maple version while keeping the same spring tension track behavior throughout the AG-100 Series installation.

Common Questions About The Omega National AG-100SVM-18

Selecting This Maple Appliance Garage For Your Run

The Omega National maple appliance garage AG-100SVM-18 supplies a straight 18 inch frame, 18-3/4 inch height, and 11-7/8 inch depth that align with typical kitchen cabinet runs. Its solid wood frame, maple veneer tambour door, and veneer-faced MDF end panels give a coordinated maple appearance suited to many cabinet styles. The spring tension track system supports smooth tambour motion, which helps this unit function well as a daily-use storage point for small appliances. For projects already using Omega National AG-100 Series components, this 18 inch maple version fits directly into that system for a matched appliance garage solution.